unit Uprint;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, DB, ADODB, StdCtrls, Mask, DBCtrlsEh, Buttons, ExtCtrls, Grids,
  DBGridEh, frxDesgn, frxClass,IniFiles, frxDBSet, frxExportXLS,
  frxExportImage, frxExportCSV, frxExportPDF, frxOLE, frxDCtrl,
  frxADOComponents, DBCtrls, bsSkinCtrls, frxExportMail, frxExportText,
  frxExportHTML, frxExportRTF, frxCross, bsDialogs, Menus, IdMessage,
  IdBaseComponent, IdComponent, IdTCPConnection, IdTCPClient,IdAttachmentFile,
  IdExplicitTLSClientServerBase, IdMessageClient, IdSMTPBase, IdSMTP,
  IdHTTP,IdMultipartFormData,IdGlobalProtocols, frxBarcode, frxRich,
  frxPreview;


type
  TfrmPrint = class(TForm)
    conn: TADOConnection;
    Panel3: TPanel;
    SpeedButton1: TSpeedButton;
    SpeedButton2: TSpeedButton;
    SpeedButton4: TSpeedButton;
    SpeedButton5: TSpeedButton;
    SpeedButton6: TSpeedButton;
    SpeedButton3: TSpeedButton;
    DBEditEh1: TDBEditEh;
    frxReport1: TfrxReport;
    frxDesigner1: TfrxDesigner;
    t_sys_reportfile: TADOQuery;
    SaveDialog1: TSaveDialog;
    DataSource1: TDataSource;
    qry1: TADOQuery;
    db1: TfrxDBDataset;
    db2: TfrxDBDataset;
    db3: TfrxDBDataset;
    db4: TfrxDBDataset;
    db5: TfrxDBDataset;
    frxXLSExport1: TfrxXLSExport;
    qry2: TADOQuery;
    qry3: TADOQuery;
    qry4: TADOQuery;
    qry5: TADOQuery;
    ADOQuery1: TADOQuery;
    Splitter1: TSplitter;
    db6: TfrxDBDataset;
    db7: TfrxDBDataset;
    db8: TfrxDBDataset;
    db9: TfrxDBDataset;
    qry6: TADOQuery;
    qry7: TADOQuery;
    qry8: TADOQuery;
    qry9: TADOQuery;
    frxPDFExport1: TfrxPDFExport;
    frxCSVExport1: TfrxCSVExport;
    frxJPEGExport1: TfrxJPEGExport;
    frxDialogControls1: TfrxDialogControls;
    frxOLEObject1: TfrxOLEObject;
    frxADOComponents1: TfrxADOComponents;
    ds9: TDataSource;
    frxHTMLExport1: TfrxHTMLExport;
    frxBMPExport1: TfrxBMPExport;
    frxTIFFExport1: TfrxTIFFExport;
    frxGIFExport1: TfrxGIFExport;
    frxSimpleTextExport1: TfrxSimpleTextExport;
    frxMailExport1: TfrxMailExport;
    frxRTFExport1: TfrxRTFExport;
    QryUserEdit: TADOQuery;
    Panel1: TPanel;
    SpeedButton7: TSpeedButton;
    t_sys_report: TADOQuery;
    frxCrossObject1: TfrxCrossObject;
    t_sys_reportfileGID: TStringField;
    t_sys_reportfileRPTNAME: TStringField;
    t_sys_reportfileRPTCONTENT: TMemoField;
    t_sys_reportfileRPTPROP: TStringField;
    t_sys_reportfileISDEFAULT: TBooleanField;
    t_sys_reportfileCOMPANYID: TStringField;
    ADOQuery2: TADOQuery;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    EXCEL1: TMenuItem;
    N5: TMenuItem;
    RTF1: TMenuItem;
    N3: TMenuItem;
    WORD1: TMenuItem;
    N4: TMenuItem;
    PDF1: TMenuItem;
    SpeedButton8: TSpeedButton;
    DBEdit1: TDBEdit;
    DBEdit2: TDBEdit;
    Label1: TLabel;
    Label2: TLabel;
    SpeedButton9: TSpeedButton;
    SpeedButton10: TSpeedButton;
    qryMailSend: TADOQuery;
    SMTP1: TIdSMTP;
    IdMsg: TIdMessage;
    frxBarCodeObject1: TfrxBarCodeObject;
    frxUserDataSet1: TfrxUserDataSet;
    frxRichObject1: TfrxRichObject;
    Panel2: TPanel;
    DBGridEh1: TDBGridEh;
    frxPreview1: TfrxPreview;
    procedure SpeedButton4Click(Sender: TObject);
    function frxDesigner1SaveReport(Report: TfrxReport;
      SaveAs: Boolean): Boolean;
    procedure SpeedButton5Click(Sender: TObject);
    procedure connBeforeConnect(Sender: TObject);
    procedure SpeedButton6Click(Sender: TObject);
    procedure SpeedButton1Click(Sender: TObject);
    procedure SpeedButton2Click(Sender: TObject);
    procedure SpeedButton3Click(Sender: TObject);
    procedure FormShow(Sender: TObject);
    function frxReport1UserFunction(const MethodName: String;
      var Params: Variant): Variant;
    procedure FormCreate(Sender: TObject);
    procedure SpeedButton7Click(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure EXCEL1Click(Sender: TObject);
    procedure RTF1Click(Sender: TObject);
    procedure WORD1Click(Sender: TObject);
    procedure PDF1Click(Sender: TObject);
    procedure SpeedButton8Click(Sender: TObject);
    procedure SpeedButton9Click(Sender: TObject);
    procedure SpeedButton10Click(Sender: TObject);
  private
    { Private declarations }
    procedure ReportPreview(repid:string);
    procedure ReportDesign(repid:string);
    procedure wndProc(var msg: Tmessage);

  public
    { Public declarations }
   Comp,OpType,dsr,Uid,RmServer,dbstr,database,userid,password:string;
   RpID,RptMode,Mailid:string;
   function connect_string(file_name:string):string;
   function CreateAdoQuery(sql:string): TAdoQuery;
   function AyalisisPararm(wepararm:string):string;
   function GetGid: string;
   procedure RegPrintDataset(myName:string;mydb1,mydb2,mydb3,mydb4,mydb5,mydb6,mydb7,mydb8,mydb9:TDataset);
   procedure MyMessage(var m:TWmCopyData);message WM_CopyData;   
  end;

var
  frmPrint: TfrmPrint;
  billno:string;
  function ReadPassword(target:string):   string;

implementation
uses u_sys_progress,my_sys_function;
{$R *.dfm}

function ReadPassword(target:string):   string;
var
    s:string[20];
    i:byte;
    s1:string;
begin
{
    setlength(s,length(target));
    for   i:=1   to   length(target)   do
        s[i]:=chr(ord(target[i])-ord('d'));
    result:=s;
}
  s1:=Copy(Trim(target),7,Length(Trim(target)));
  result:=Copy(Trim(s1),1,Length(Trim(s1))-9);
end;
function fnGetParaValue(strkey,strcontent:string):string ;
var
ipos:Integer;
strtmp:string;
begin
  result:='';
  ipos:=Pos(strkey,strcontent);
  if(ipos>1) then
  begin
    strtmp:=  Copy(strcontent,ipos+1,Length(strcontent)-ipos);
    if(Pos('&',strtmp)>1) then
      result:=  Copy(strtmp,Pos('=',strtmp)+1 , Pos('&',strtmp)-Pos('=',strtmp)-1)
    else
      result:=Copy(strtmp,Pos('=',strtmp)+1,Length(strtmp)-Pos('=',strtmp));
  end;
end;

function TfrmPrint.GetGid: string;
begin
  ADOQuery2.Close;
  ADOQuery2.SQL.Text:='select newid() as GID ';
  ADOQuery2.Open;
  result:=ADOQuery2.fieldbyname('GID').AsString;
end;
function TfrmPrint.AyalisisPararm(wepararm:string):string;
begin


    wepararm:=StringReplace(StringReplace(wepararm,'%20',' ',[rfReplaceAll]),'%5C','\',[rfReplaceAll]);



 if (pos('RpID',wepararm)>1) and (pos('RptMode',wepararm)>1 )  then
 begin
    RpID:=fnGetParaValue('RpID',wepararm);
    RptMode:=fnGetParaValue('RptMode',wepararm);
    Mailid:=fnGetParaValue('Mailid',wepararm);
 end;
 if (pos('Mailid',wepararm)>1) then
 begin
    Mailid:=fnGetParaValue('Mailid',wepararm);
 end;


  if pos('Password',wepararm)>1 then begin
  wepararm:=Copy(wepararm,Pos('?',wepararm)+1,Length(wepararm));
  Comp:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
  OpType:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);


  wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
  dsr:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
  Uid:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
  RmServer:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
//  dbstr:=Copy(wepararm,Pos('=',wepararm)+1,Length(wepararm));
  dbstr:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(dbstr,Pos('Database',dbstr)+8,Length(dbstr));
  database:=Copy(wepararm,Pos('=',wepararm)+1,Pos(';',wepararm)-Pos('=',wepararm)-1);

  wepararm:=Copy(dbstr,Pos('User ID',dbstr)+7,Length(dbstr));
  userid:=Copy(wepararm,Pos('=',wepararm)+1,Pos(';',wepararm)-Pos('=',wepararm)-1);


  wepararm:=Copy(wepararm,Pos('Password',wepararm)+8,Length(wepararm));
  password:=Copy(wepararm,Pos('=',wepararm)+1,Length(wepararm));
  end else begin
    wepararm:=Copy(wepararm,Pos('?',wepararm)+1,Length(wepararm));
    Comp:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

    wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
    OpType:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);


    wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
    dsr:=Copy(wepararm,Pos('=',wepararm)+1,Pos('&',wepararm)-Pos('=',wepararm)-1);

    wepararm:=Copy(wepararm,Pos('&',wepararm)+1,Length(wepararm));
    Uid:=Copy(wepararm,Pos('=',wepararm)+1,Length(wepararm));
  end;


end;

function TfrmPrint.connect_string(file_name:string):string;
var
  str,psw:WideString;
  inifile1:Tinifile;
  isini:Boolean;
begin
  str:='';
  isini:=false;
//  isini:=FileExists(ExtractFilePath(application.ExeName)+file_name);

  if (RmServer='') or isini then begin
  inifile1:=Tinifile.Create(ExtractFilePath(application.ExeName)+file_name);
  psw:=inifile1.ReadString('database','Password','');
  psw:=ReadPassword(psw);
  str:='Provider='+inifile1.ReadString('database','Provider','');
  str:=str+' Password='+Trim(psw)+';';
  str:=str+' Persist Security Info='+inifile1.ReadString('database','Persist Security Info','');
  str:=str+'User ID='+inifile1.ReadString('database','User ID','');
  str:=str+'Initial Catalog='+inifile1.ReadString('database','Initial Catalog','');
  str:=str+'Data Source='+inifile1.ReadString('database','Data Source','');
  inifile1.Free;

  end else begin
    str:='Provider=SQLOLEDB.1;';
    password:=Copy(password,0,Pos(';',password)-1);
    str:=str+' Password='+Trim(password)+';';
    str:=str+' Persist Security Info=False;';
    str:=str+'User ID='+userid+';';
    str:=str+'Initial Catalog='+database+';';
    str:=str+'Data Source='+RmServer+';';
  end;



  result:=str;
end;
procedure TfrmPrint.RegPrintDataset(myName: string; mydb1, mydb2, mydb3,
  mydb4,mydb5,mydb6,mydb7,mydb8,mydb9: TDataset);
var ifdefault:boolean ;
begin
  ifdefault:=False ;
 // caption:=myname+'-打印报表设置' ;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //11
  db1.DataSet:=mydb1;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //12
  db2.DataSet:=mydb2;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //13
  db3.DataSet:=mydb3;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //14
  db4.DataSet:=mydb4;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //15
  db5.DataSet:=mydb5;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //16
  db6.DataSet:=mydb6;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //17
  db7.DataSet:=mydb7;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //18
  db8.DataSet:=mydb8;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;      //19
  db9.DataSet:=mydb9;
end;


procedure TfrmPrint.SpeedButton4Click(Sender: TObject);
var
  gid:string;
begin
  {
  if t_sys_report.IsEmpty then begin
    t_sys_report.Close;
    t_sys_report.SQL.Clear;
    t_sys_report.SQL.Add('select top 0 * from sys_report ');
    t_sys_report.Open;
  end else begin
  end;
  }
  gid:=GetGid;
  t_sys_reportfile.Insert;
  t_sys_reportfile['RPTNAME']:=InputBox('更改名称','新的名称',t_sys_reportfile.fieldbyname('RPTNAME').asstring);
  t_sys_reportfile['RPTCONTENT']:='1';
  t_sys_reportfile['GID']:=gid;
  t_sys_reportfile['RPTPROP']:=OpType;
  t_sys_reportfile['ISDEFAULT']:=false;
  t_sys_reportfile['COMPANYID']:=Comp;
  t_sys_reportfile.post;

   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;


  frxReport1.DesignReport;

end;

function TfrmPrint.CreateAdoQuery(sql:string): TAdoQuery;
begin
  Result:=TAdoQuery.Create(nil);
  with Result do begin
    Close;SQL.Clear;
    connection:=conn;
  end;
end;


function TfrmPrint.frxDesigner1SaveReport(Report: TfrxReport;
  SaveAs: Boolean): Boolean;
var template : TStream;
begin
  if saveas then begin
    try
       if SaveDialog1.Execute then
         frxReport1.savetofile(SaveDialog1.filename);
    except
      showmessage('另存格式失败！');
    end;
  end else begin
    template := TMemoryStream.Create;
    template.Position := 0;
    frxReport1.SaveToStream(template);
   
    t_sys_report.Edit;
    {
    t_sys_report['RPTNAME']:=t_sys_reportfile['RPTNAME'];
    t_sys_report['RPTPROP']:=OpType;
    t_sys_report['ISDEFAULT']:=false;
    t_sys_report['COMPANYID']:=Comp;
    }
    try
      t_sys_report.DisableControls;
      (t_sys_report.FieldByName('Report') as TBlobField).LoadFromStream(template);
      t_sys_report.Post;
    finally
      t_sys_report.EnableControls;
      template.Free;
    end;
    result:=true;
    if t_sys_reportfile.Active then 
    t_sys_reportfile.Requery();
  end;

end;

procedure TfrmPrint.SpeedButton5Click(Sender: TObject);
var
   template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  if t_sys_report.isempty then
  begin
    showmessage('没有要设计的格式！');
    exit;
  end;
  try
    if not t_sys_report.fieldbyname('report').IsNull then begin
      try
        template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
        template.Position := 0;
        frxReport1.LoadFromStream(template);

      finally
        template.Free;
      end;
    end;
    frxReport1.DesignReport;
  except
    showmessage('格式设计失败！');
  end;

end;

procedure TfrmPrint.connBeforeConnect(Sender: TObject);
begin
//  Conn.ConnectionString:=connect_string('main.ini');
end;

procedure TfrmPrint.SpeedButton6Click(Sender: TObject);
begin
  if t_sys_reportfile.isempty then
  begin
    showmessage('没有要删除的格式！');
    exit;
  end;
  if application.MessageBox('您确定要删除格式吗?','警告:',MB_OKCANCEL)=IDOK then
    t_sys_reportfile.delete;


end;

procedure TfrmPrint.SpeedButton1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;
  if t_sys_report.isempty then
    exit;
  try

    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.ShowReport;
  except
    showmessage('打印预览失败！');
  end;

end;

procedure TfrmPrint.SpeedButton2Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Print;
  except
    showmessage('打印输出失败！');
  end;

end;

procedure TfrmPrint.SpeedButton3Click(Sender: TObject);
begin
  Close;
end;

procedure TfrmPrint.FormShow(Sender: TObject);
var s,paramallstr : string;
sl:TStringList;
begin
  if not ASSIGNED(frm_sys_progress) then
      frm_sys_progress:=tfrm_sys_progress.Create(application);
    frm_sys_progress.bsSkinGauge1.ProgressText:='正在提取报表数据。。。';
    frm_sys_progress.Show;
    frm_sys_progress.bsSkinGauge1.MaxValue:=100;
    frm_sys_progress.bsSkinGauge1.MinValue:=0;
    frm_sys_progress.bsSkinGauge1.Value:=0;
  try
   SL:=TStringList.Create;
   OpType:='SEAEOP';
   paramallstr:=ParamStr(1)+ParamStr(2)+ParamStr(3);
//   if Pos('///',paramallstr)<0 then
     paramallstr:=StringReplace(paramallstr,'//','///',[]);
     paramallstr:=StringReplace(paramallstr,'UserID','User ID',[]);
     paramallstr:=StringReplace(paramallstr,'ConnectTimeout','Connect Timeout',[]);
//   SL.Add(ParamStr(1));
//sl.SaveToFile('D:\HXT.TXT');
   AyalisisPararm(paramallstr);
//   frxUserDataSet1.fi



   Conn.ConnectionString:=connect_string('main.ini');
//   SL.Add(Conn.ConnectionString);

//   sl.SaveToFile('D:\HXT.TXT');
//  ShowMessage(Conn.ConnectionString);

  frm_sys_progress.bsSkinGauge1.Value:=10;
  Conn.Connected:=True;
  with ADOQuery1 do
  begin
    Close;SQL.Clear;
    SQL.Add('Select * from sys_report_dbsource');
    SQL.Add('Where GID=:GID');
    Parameters.ParamByName('GID').Value:=dsr;
    Open;
    if not IsEmpty then
    begin
      if FieldByName('SQLSTRING1').AsString<>'' then
      begin
       qry1.Close;
       qry1.SQL.Clear;
       qry1.SQL.Add(FieldByName('SQLSTRING1').AsString);
       qry1.Open;
      end;
       frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING2').AsString<>'' then
      begin
       qry2.Close;
       qry2.SQL.Clear;
       qry2.SQL.Add(FieldByName('SQLSTRING2').AsString);
       if pos('=:',FieldByName('SQLSTRING2').AsString)>0 then begin
        qry2.DataSource:=dsr1;
        paramname:=getparamname(FieldByName('SQLSTRING2').AsString);
        qry2.Parameters.ParamByName(paramname).Value:=qry1.fieldbyname(paramname).AsString;
       end;
       qry2.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING3').AsString<>'' then
      begin
       qry3.Close;
       qry3.SQL.Clear;
       qry3.SQL.Add(FieldByName('SQLSTRING3').AsString);
       if pos('=:',FieldByName('SQLSTRING3').AsString)>0 then begin
        qry3.DataSource:=dsr1;
        paramname:=getparamname(FieldByName('SQLSTRING3').AsString);
        qry3.Parameters.ParamByName(paramname).Value:=qry1.fieldbyname(paramname).AsString;
       end;
       qry3.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING4').AsString<>'' then
      begin
       qry4.Close;
       qry4.SQL.Clear;
       qry4.SQL.Add(FieldByName('SQLSTRING4').AsString);
       if pos('=:',FieldByName('SQLSTRING4').AsString)>0 then begin
        qry4.DataSource:=dsr1;
        paramname:=getparamname(FieldByName('SQLSTRING4').AsString);
        qry4.Parameters.ParamByName(paramname).Value:=qry1.fieldbyname(paramname).AsString;
       end;
       qry4.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING5').AsString<>'' then
      begin
       qry5.Close;
       qry5.SQL.Clear;
       qry5.SQL.Add(FieldByName('SQLSTRING5').AsString);
       if pos('=:',FieldByName('SQLSTRING5').AsString)>0 then  qry5.DataSource:=dsr1;

       qry5.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING6').AsString<>'' then
      begin
       qry6.Close;
       qry6.SQL.Clear;
       qry6.SQL.Add(FieldByName('SQLSTRING6').AsString);
       if pos('=:',FieldByName('SQLSTRING6').AsString)>0 then  qry6.DataSource:=dsr1;
       qry6.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      
      if FieldByName('SQLSTRING7').AsString<>'' then
      begin
       qry7.Close;
       qry7.SQL.Clear;
       qry7.SQL.Add(FieldByName('SQLSTRING7').AsString);
       qry7.Open;
      end;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;
      if FieldByName('SQLSTRING8').AsString<>'' then
      begin
       qry8.Close;
       qry8.SQL.Clear;
       qry8.SQL.Add(FieldByName('SQLSTRING8').AsString);
       qry8.Open;
      end;
      billno:=FieldByName('DESCRIPTION').AsString;
      if (billno<>'') then
       frxReport1.FileName:=billno;


      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      //9
    end;
  end;

  with qry9 do
  begin
    Close;SQL.Clear;
    SQL.Add('Select * from company');
    SQL.Add('Where GID=:GID');
    Parameters.ParamByName('GID').Value:=Comp;
    Open;
  end;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      //10

  RegPrintDataset(OpType+'1',qry1,qry2,qry3,qry4,qry5,qry6,qry7,qry8,qry9);

  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      //11
   if (RpID<>'')  then
 begin
   if( RptMode='1') then
     ReportPreview(RpID)
   else if  (RptMode='2') then
      ReportDesign(RpID);     
 end else begin
//  s:='select * from op_seae where bsno=''EDI512997f4bc3a461a827b9fe932882f90''';

  frxReport1.Preview:=nil;
  Panel2.Visible:=True;


  with QryUserEdit do
  begin
    Close;SQL.Clear;
    SQL.Add('select V.OPERATERANGE from VW_User_Authority v ');
    SQL.Add(' where V.USERID=:USERID AND V.NAME=:RptPrint');
    SQL.Add(' and V.ISDELETE=0');
    Parameters.ParamByName('USERID').Value:=Uid;
    Parameters.ParamByName('RptPrint').Value:='modRptPrintSet';
    Open;
    if not IsEmpty then begin
      if (FieldByName('OPERATERANGE').AsInteger=1) or (FieldByName('OPERATERANGE').AsInteger=2)
      or (FieldByName('OPERATERANGE').AsInteger=3) or (FieldByName('OPERATERANGE').AsInteger=0) then begin
        SpeedButton4.Enabled:=True;
        SpeedButton3.Enabled:=True;
        SpeedButton5.Enabled:=True;
        SpeedButton6.Enabled:=True;
        SpeedButton7.Enabled:=True;
      end else begin
        SpeedButton4.Enabled:=false;
        SpeedButton3.Enabled:=false;
        SpeedButton5.Enabled:=false;
        SpeedButton6.Enabled:=false;
        SpeedButton7.Enabled:=false;
      end;
    end else begin
      SpeedButton4.Enabled:=false;
      SpeedButton3.Enabled:=false;
      SpeedButton5.Enabled:=false;
      SpeedButton6.Enabled:=false;
      SpeedButton7.Enabled:=false;
    end;
  end;

  with qryMailSend do
  begin
    Close;SQL.Clear;
    SQL.Add('select * from op_mail_send ');
    SQL.Add(' where GID=:MAILID');
    Parameters.ParamByName('MAILID').Value:=Mailid;
    Open;
    if not IsEmpty then begin
      SpeedButton10.Enabled:=True;
    end else begin
      SpeedButton10.Enabled:=false;
    end;
  end;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      //11
  
  with t_sys_reportfile do
  begin
    Close;SQL.Clear;
    SQL.Add('select GID,RPTNAME,RPTCONTENT,RPTPROP,ISDEFAULT,COMPANYID from sys_report');
    SQL.Add('where RPTPROP=:RPTPROP and COMPANYID=:COMPANYID  and GID NOT IN (SELECT RPTGID FROM sys_report_userrange WHERE USERID=:USERID) ');
    Parameters.ParamByName('RPTPROP').Value:=OpType;
    Parameters.ParamByName('COMPANYID').Value:=Comp;
    Parameters.ParamByName('USERID').Value:=Uid;
    SQL.Add('order by  RPTPROP,COMPANYID');
    Open;
    frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+5;      //11
  
  end;
  end;
  frm_sys_progress.bsSkinGauge1.Value:=100;
  finally
    frm_sys_progress.close;
    frm_sys_progress:=nil;
  end;  

end;

function TfrmPrint.frxReport1UserFunction(const MethodName: String;
  var Params: Variant): Variant;
begin
  if uppercase(MethodName)='MONEYCN' then
   Result := MoneyCn(Params[0],Params[1]);
     if uppercase(MethodName)='MONEYCNUSD' then
   Result := MoneyCnUSD(Params[0]);

  if uppercase(MethodName)='ENGDATEFMT' then
   Result := EngDateFmt(Params[0],Params[1],Params[2],Params[3],Params[4],Params[5],Params[6]);

  if uppercase(MethodName)='GETCUSTBALDATE' then
   Result :=formatdatetime('YYYY-MM-DD',getstlDate(Params[0],Params[1],Params[2]));

  if uppercase(MethodName)='GETCUSTBALDAY' then
   Result :=inttostr(getstlDay(Params[0],Params[1],Params[2]));

  if uppercase(MethodName)='MONEYEN' then
   Result := EWords(Params[0],0);
  if uppercase(MethodName)='AMOUNT2STR' then
   Result :=Amount2Str(Params[0],Params[1],Params[2]);
  if uppercase(MethodName)='MONEYEN2' then
   Result := FloatToEnglish(Params[0],Params[1]);
  if uppercase(MethodName)='STRINGREPLACE' then
   Result := StringReplace(Params[0],Params[1],Params[2],[rfReplaceAll]);

end;

procedure TfrmPrint.FormCreate(Sender: TObject);
begin

  frxReport1.AddFunction('function MoneyCn(num:real;lx:boolean=false):widestring;','自定义');
  frxReport1.AddFunction('function moneycnusd(num:real;):widestring;','自定义');
  frxReport1.AddFunction('function MoneyEn(num:real;):widestring;','自定义');
  frxReport1.AddFunction('function MoneyEn2(num:real,curr:String;):widestring;','自定义');
  frxReport1.AddFunction('function EngDateFmt(ADateTime:TDateTime;JX,DX:boolean;MDY:Boolean=true;MD:Boolean=false;DIAN:Boolean=false;MY:Boolean=false):string;','自定义');
  frxReport1.AddFunction('function GETCUSTBALDATE(ADateTime:TDateTime;Cust,Sale:String):TDateTime;','自定义');
  frxReport1.AddFunction('function GETCUSTBALDAY(ADateTime:TDateTime;Cust,Sale:String):integer;','自定义');
  frxReport1.AddFunction('function Amount2Str(amount:Real;numpos:Integer;curr:string):widestring;','自定义');
  frxReport1.AddFunction('function StringReplace(S, OldPattern, NewPattern: string):widestring;','自定义');

end;

procedure TfrmPrint.SpeedButton7Click(Sender: TObject);
begin
  if t_sys_reportfile.isempty then
  begin
    showmessage('没有要更改名称的格式！');
    exit;
  end;
  t_sys_reportfile.edit;
  t_sys_reportfile['RPTNAME']:=InputBox('更改名称','新的名称',t_sys_reportfile.fieldbyname('RPTNAME').asstring);
  t_sys_reportfile.post;
end;

procedure TfrmPrint.N1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Export(frxJPEGExport1);
  except
    showmessage('打印输出失败！');
  end;
end;

procedure TfrmPrint.EXCEL1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Export(frxXLSExport1);
  except
    showmessage('打印输出失败！');
  end;
end;

procedure TfrmPrint.RTF1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Export(frxRTFExport1);
  except
    showmessage('打印输出失败！');
  end;
end;

procedure TfrmPrint.WORD1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Export(frxHTMLExport1);
  except
    showmessage('打印输出失败！');
  end;
end;

procedure TfrmPrint.PDF1Click(Sender: TObject);
var
  template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  try
    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;
    end;
     frxReport1.PrepareReport;
     frxReport1.Export(frxPDFExport1);
  except
    showmessage('打印输出失败！');
  end;
end;

procedure TfrmPrint.SpeedButton8Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=SpeedButton8.ClientToScreen(Point(0,SpeedButton8.Height));
  PopupMenu1.Popup(Pnt.x,Pnt.y);
end;

procedure TfrmPrint.SpeedButton9Click(Sender: TObject);
begin
  frmSendMail := TfrmSendMail.Create(self);
  try
    frmSendMail.ShowModal;
  finally
    freeandnil(frmSendMail);
  end;
end;

/// <summary>
/// 打印预览
/// </summary>
procedure TfrmPrint.ReportPreview(repid:string);
var
  template : TStream;
begin
  if Length(repid)<30 then begin
  frxReport1.Preview:=frxPreview1;
  Panel2.Visible:=false;
  frmPrint.Width:=850;
  frmPrint.Height:=800;
  end;


   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=repid;//t_sys_reportfile['GID'];
   t_sys_report.Open;
  if t_sys_report.isempty then
    exit;

  try

    try
      template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
      template.Position := 0;
      frxReport1.LoadFromStream(template);
    finally
      template.Free;

    end;
     frxReport1.ShowReport(True);
  except
    showmessage('打印预览失败！');
    close();
  end;

 //  close;
end;
 /// <summary>
 ///
 /// </summary>
 procedure TfrmPrint.ReportDesign(repid:string);
var
   template : TStream;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:= repid;//t_sys_reportfile['GID'];
   t_sys_report.Open;

  if t_sys_report.isempty then
    exit;
  if t_sys_report.isempty then
  begin
    showmessage('没有要设计的格式！');
    exit;
  end;

  try
    if not t_sys_report.fieldbyname('report').IsNull then begin
      try
        template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
        template.Position := 0;
        frxReport1.LoadFromStream(template);

      finally
        template.Free;
      end;
    end;

    frxReport1.DesignReport;
    Close();
  except
    showmessage('格式设计失败！');
  end;

end;


procedure TfrmPrint.SpeedButton10Click(Sender: TObject);
var
  template : TStream;
  str,s:widestring;
  ScriptPath,naspath:string;
  str_memo:Tmemo;
  MultiPartFormDataStream: TIdMultiPartFormDataStream;
  IdHTTP1:TIdHTTP;
begin
   t_sys_report.close;
   t_sys_report.Parameters.ParamByName('GID').Value:=t_sys_reportfile['GID'];//t_sys_reportfile['GID'];
   t_sys_report.Open;
  if t_sys_report.isempty then
    exit;


  if (qryMailSend.FieldByName('RECEIVER').AsString='') or (qryMailSend.FieldByName('SENDER').AsString='') then begin
    showmessage('邮件模板不正确,不能发送！');
    exit;
  end;


  try
    template := t_sys_report.CreateBlobStream(t_sys_report.FieldByName('report'), bmRead);
    template.Position := 0;
    frxReport1.LoadFromStream(template);
  finally
    template.Free;
  end;
  frxReport1.PrepareReport;

  try


    str_memo:=Tmemo.create(application);
    str_memo.Parent:=frmPrint;
    str_memo.visible:=False;


    try
      SMTP1.AuthType := satDefault;       //(satNone, satDefault, satSASL);
      SMTP1.username:=qryMailSend.FieldByName('SENDERUSERNAME').AsString;
      SMTP1.Password :=qryMailSend.FieldByName('SENDERPASSWORD').AsString;
      SMTP1.Host:=qryMailSend.FieldByName('SENDSERVICE').AsString;
      SMTP1.Port:=StrToIntDef(qryMailSend.FieldByName('SENDERPORT').AsString,25);
      try
        SMTP1.Connect;
      except
        on e : Exception do
        begin
          ShowMessage('连接邮箱出错:'+E.Message);
        end;
      end;
      if not SMTP1.Connected then
      begin
        Sleep(1000);
        SMTP1.Connect;
      end;

        ScriptPath:=ExtractFilePath(ParamStr(0))+'CUSTOMFILE\';
        if not DirectoryExists(ScriptPath) then  CreateDir(ScriptPath);
        str:=ScriptPath +qryMailSend.fieldbyname('ATTACHMENT').AsString+'.PDF';

        frxPDFExport1.FileName:=str;
        frxPDFExport1.ShowDialog:=false;
        frxReport1.Export(frxPDFExport1);
        ScriptPath:=ExtractFilePath(ParamStr(0))+'CUSTOMFILE\';
        if not DirectoryExists(ScriptPath) then  CreateDir(ScriptPath);

        try
          with IdMsg do
          begin
            body.Clear;
            Body.Text :=str_memo.lines.Text;
            From.address :=qryMailSend.fieldbyname('SENDER').AsString;
            Recipients.EMailAddresses :=qryMailSend.fieldbyname('RECEIVER').AsString;
            Subject:=qryMailSend.fieldbyname('SUBJECT').AsString;
            TIdAttachmentFile.Create(MessageParts,str);
          end;
          if not SMTP1.Connected then
          begin
            Sleep(1000);
            SMTP1.Connect;
          end;
          SMTP1.Send(IdMsg);

       MultiPartFormDataStream := TIdMultiPartFormDataStream.Create;
       IdHTTP1:=TIdHTTP.Create(Application);
       try
         IdHttp1.Request.Accept := '*/*';
         IdHttp1.Request.AcceptLanguage:='zh-CN';
         IdHttp1.Request.ContentType := MultiPartFormDataStream.RequestContentType;
         MultiPartFormDataStream.AddFormField('Mailid',Mailid);
         MultiPartFormDataStream.AddFile('filename',str,GetMIMETypeFromFile(str));
         MultiPartFormDataStream.Position := 0;
         IdHTTP1.Post(qryMailSend.fieldbyname('HTTPURL').AsString, MultiPartFormDataStream);
       finally
         MultiPartFormDataStream.Free;
         FreeAndNil(IdHTTP1);
       end;



        finally
            SMTP1.Disconnect;
        end;

      MessageDlg('发送成功!',mtConfirmation,[mbOK],0);
    except
      MessageDlg('发送失败!',mtError,[mbOK],0);
    end;


    str_memo.free;
    if SMTP1.Connected then SMTP1.Disconnect;

  except
    showmessage('存为文件失败！');
  end;

  close;

end;

procedure TfrmPrint.wndProc(var msg: Tmessage);
begin

end;

procedure TfrmPrint.MyMessage(var m: TWmCopyData);
var
  msg:string;
begin
   msg :=StrPas(m.CopyDataStruct^.lpData);    //获取参数数据
   Application.BringToFront;
//   ShowMessage(msg);
   AyalisisPararm(msg);
  with ADOQuery1 do
  begin
    Close;SQL.Clear;
    SQL.Add('Select * from sys_report_dbsource');
    SQL.Add('Where GID=:GID');
    Parameters.ParamByName('GID').Value:=dsr;
    Open;
    if not IsEmpty then
    begin
      if FieldByName('SQLSTRING1').AsString<>'' then
      begin
       qry1.Close;
       qry1.SQL.Clear;
       qry1.SQL.Add(FieldByName('SQLSTRING1').AsString);
       qry1.Open;
      end;
      if FieldByName('SQLSTRING2').AsString<>'' then
      begin
       qry2.Close;
       qry2.SQL.Clear;
       qry2.SQL.Add(FieldByName('SQLSTRING2').AsString);
       qry2.Open;
      end;
      if FieldByName('SQLSTRING3').AsString<>'' then
      begin
       qry3.Close;
       qry3.SQL.Clear;
       qry3.SQL.Add(FieldByName('SQLSTRING3').AsString);
       qry3.Open;
      end;
      if FieldByName('SQLSTRING4').AsString<>'' then
      begin
       qry4.Close;
       qry4.SQL.Clear;
       qry4.SQL.Add(FieldByName('SQLSTRING4').AsString);
       qry4.Open;
      end;
      if FieldByName('SQLSTRING5').AsString<>'' then
      begin
       qry5.Close;
       qry5.SQL.Clear;
       qry5.SQL.Add(FieldByName('SQLSTRING5').AsString);
       qry5.Open;
      end;
      if FieldByName('SQLSTRING6').AsString<>'' then
      begin
       qry6.Close;
       qry6.SQL.Clear;
       qry6.SQL.Add(FieldByName('SQLSTRING6').AsString);
       qry6.Open;
      end;
      if FieldByName('SQLSTRING7').AsString<>'' then
      begin
       qry7.Close;
       qry7.SQL.Clear;
       qry7.SQL.Add(FieldByName('SQLSTRING7').AsString);
       qry7.Open;
      end;
      if FieldByName('SQLSTRING8').AsString<>'' then
      begin
       qry8.Close;
       qry8.SQL.Clear;
       qry8.SQL.Add(FieldByName('SQLSTRING8').AsString);
       qry8.Open;
      end;
      billno:=FieldByName('DESCRIPTION').AsString;
      if (billno<>'') then
       frxReport1.FileName:=billno;


    end;
  end;
 if (RpID<>'')  then
 begin
   if( RptMode='1') then
     ReportPreview(RpID)
   else if  (RptMode='2') then
      ReportDesign(RpID);     
 end else begin
//  s:='select * from op_seae where bsno=''EDI512997f4bc3a461a827b9fe932882f90''';



  with QryUserEdit do
  begin
    Close;SQL.Clear;
    SQL.Add('select V.OPERATERANGE from VW_User_Authority v ');
    SQL.Add(' where V.USERID=:USERID AND V.NAME=:RptPrint');
    SQL.Add(' and V.ISDELETE=0');
    Parameters.ParamByName('USERID').Value:=Uid;
    Parameters.ParamByName('RptPrint').Value:='modRptPrintSet';
    Open;
    if not IsEmpty then begin
      if (FieldByName('OPERATERANGE').AsInteger=1) or (FieldByName('OPERATERANGE').AsInteger=2)
      or (FieldByName('OPERATERANGE').AsInteger=3) or (FieldByName('OPERATERANGE').AsInteger=0) then begin
        SpeedButton4.Enabled:=True;
        SpeedButton3.Enabled:=True;
        SpeedButton5.Enabled:=True;
        SpeedButton6.Enabled:=True;
        SpeedButton7.Enabled:=True;
      end else begin
        SpeedButton4.Enabled:=false;
        SpeedButton3.Enabled:=false;
        SpeedButton5.Enabled:=false;
        SpeedButton6.Enabled:=false;
        SpeedButton7.Enabled:=false;
      end;
    end else begin
      SpeedButton4.Enabled:=false;
      SpeedButton3.Enabled:=false;
      SpeedButton5.Enabled:=false;
      SpeedButton6.Enabled:=false;
      SpeedButton7.Enabled:=false;
    end;
  end;

  with qryMailSend do
  begin
    Close;SQL.Clear;
    SQL.Add('select * from op_mail_send ');
    SQL.Add(' where GID=:MAILID');
    Parameters.ParamByName('MAILID').Value:=Mailid;
    Open;
    if not IsEmpty then begin
      SpeedButton10.Enabled:=True;
    end else begin
      SpeedButton10.Enabled:=false;
    end;
  end;

  with t_sys_reportfile do
  begin
    Close;SQL.Clear;
    SQL.Add('select GID,RPTNAME,RPTCONTENT,RPTPROP,ISDEFAULT,COMPANYID from sys_report');
    SQL.Add('where RPTPROP=:RPTPROP and COMPANYID=:COMPANYID  and GID NOT IN (SELECT RPTGID FROM sys_report_userrange WHERE USERID=:USERID) ');
    Parameters.ParamByName('RPTPROP').Value:=OpType;
    Parameters.ParamByName('COMPANYID').Value:=Comp;
    Parameters.ParamByName('USERID').Value:=Uid;
    SQL.Add('order by  RPTPROP,COMPANYID');
    Open;

  end;
  end;

end;

end.