unit u_op_seae_teshushen;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, dxExEdtr, XPMenu, Menus, dxDBTLCl, dxGrClms, dxDBCtrl, dxDBGrid,
  dxTL, dxCntner, DB, ADODB, Mask, wwdbedit, Wwdotdot, Wwdbcomb, wwdblook,
  RxLookup, wwdbdatetimepicker, StdCtrls, bsSkinCtrls, ExtCtrls, ComCtrls,
  bsSkinTabs, DBCtrls,DateUtils;

type
  Tfrm_op_seae_teshushenhe = class(TForm)
    t_op_seae: TADOQuery;
    t_op_seae1: TDataSource;
    bsSkinButton13: TbsSkinButton;
    bsSkinButton1: TbsSkinButton;
    PopupMenu2: TPopupMenu;
    N16: TMenuItem;
    XPMenu1: TXPMenu;
    t_op_seaesel: TADOQuery;
    ds_op_seaesel1: TDataSource;
    pm1: TPopupMenu;
    N1: TMenuItem;
    N2: TMenuItem;
    N3: TMenuItem;
    bsSkinPanel2: TbsSkinPanel;
    bsSkinPanel3: TbsSkinPanel;
    bsSkinButton3: TbsSkinButton;
    bsSkinButton7: TbsSkinButton;
    bsSkinButton8: TbsSkinButton;
    t_op_bill: TADOQuery;
    ds_op_bill1: TDataSource;
    bsSkinPageControl1: TbsSkinPageControl;
    bskntbsht1: TbsSkinTabSheet;
    bskntbsht2: TbsSkinTabSheet;
    dxDBGrid2: TdxDBGrid;
    dxDBGrid2Column2: TdxDBGridColumn;
    dxDBGrid2Column3: TdxDBGridColumn;
    dxDBGrid2Column4: TdxDBGridColumn;
    dxDBGrid2Column5: TdxDBGridColumn;
    dxDBGrid2Column6: TdxDBGridColumn;
    bsSkinPanel4: TbsSkinPanel;
    dxDBGrid3: TdxDBGrid;
    dxDBGridMaskColumn4: TdxDBGridMaskColumn;
    dxDBGridMaskColumn7: TdxDBGridMaskColumn;
    dxDBGridMaskColumn13: TdxDBGridMaskColumn;
    dxDBGridMaskColumn14: TdxDBGridMaskColumn;
    dxDBGridMaskColumn15: TdxDBGridMaskColumn;
    dxDBGridDateColumn1: TdxDBGridDateColumn;
    dxDBGridMaskColumn17: TdxDBGridMaskColumn;
    dxDBGridMaskColumn24: TdxDBGridMaskColumn;
    dxDBGridMaskColumn57: TdxDBGridMaskColumn;
    dxDBGridMaskColumn58: TdxDBGridMaskColumn;
    dxDBGridMaskColumn61: TdxDBGridMaskColumn;
    PopupMenu1: TPopupMenu;
    MenuItem1: TMenuItem;
    bsSkinButton5: TbsSkinButton;
    bsSkinButton9: TbsSkinButton;
    PopupMenu3: TPopupMenu;
    MenuItem2: TMenuItem;
    dxDBGrid2Column7: TdxDBGridColumn;
    bsSkinPanel5: TbsSkinPanel;
    Panel1: TPanel;
    bsSkinButton11: TbsSkinButton;
    Label17: TLabel;
    wwDBDateTimePicker6: TwwDBDateTimePicker;
    Label18: TLabel;
    wwDBDateTimePicker7: TwwDBDateTimePicker;
    Label19: TLabel;
    RxDBLookupCombo1: TRxDBLookupCombo;
    dxDBGrid2Column8: TdxDBGridColumn;
    dxDBGrid2Column9: TdxDBGridColumn;
    dxDBGrid3Column12: TdxDBGridColumn;
    dxDBGrid3Column13: TdxDBGridColumn;
    dxDBGrid3Column14: TdxDBGridColumn;
    dxDBGrid3Column15: TdxDBGridColumn;
    Label4: TLabel;
    Label7: TLabel;
    Label12: TLabel;
    Label13: TLabel;
    Label14: TLabel;
    Label21: TLabel;
    Label22: TLabel;
    Label23: TLabel;
    Label24: TLabel;
    Label15: TLabel;
    Label25: TLabel;
    Label26: TLabel;
    RxDBLookupCombo4: TRxDBLookupCombo;
    DBEdit9: TDBEdit;
    DBEdit10: TDBEdit;
    wwDBDateTimePicker5: TwwDBDateTimePicker;
    DBEdit1: TDBEdit;
    wwDBDateTimePicker8: TwwDBDateTimePicker;
    RxDBLookupCombo7: TRxDBLookupCombo;
    wwDBDateTimePicker9: TwwDBDateTimePicker;
    DBEdit2: TDBEdit;
    DBEdit3: TDBEdit;
    RxDBLookupCombo8: TRxDBLookupCombo;
    dxDBGrid2Column10: TdxDBGridColumn;
    dxDBGrid2Column11: TdxDBGridColumn;
    bsSkinButton38: TbsSkinButton;
    dxDBGrid2Column12: TdxDBGridColumn;
    dxDBGrid2Column13: TdxDBGridColumn;
    dxDBGrid2Column14: TdxDBGridColumn;
    RxDBLookupCombo2: TRxDBLookupCombo;
    Label2: TLabel;
    Label3: TLabel;
    wwDBDateTimePicker1: TwwDBDateTimePicker;
    RxDBLookupCombo3: TRxDBLookupCombo;
    dxDBGrid2Column15: TdxDBGridColumn;
    dxDBGrid2Column16: TdxDBGridColumn;
    Label1: TLabel;
    DBMemo1: TDBMemo;
    Label29: TLabel;
    DBMemo2: TDBMemo;
    Label6: TLabel;
    DBMemo3: TDBMemo;
    Label8: TLabel;
    DBMemo4: TDBMemo;
    Label9: TLabel;
    DBMemo5: TDBMemo;
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormShow(Sender: TObject);
    procedure bsSkinButton3Click(Sender: TObject);
    procedure bsSkinButton7Click(Sender: TObject);
    procedure bsSkinButton8Click(Sender: TObject);
    procedure bsSkinButton5Click(Sender: TObject);
    procedure bsSkinButton9Click(Sender: TObject);
    procedure bsSkinButton38Click(Sender: TObject);
    procedure dxDBGrid2Click(Sender: TObject);
    procedure N16Click(Sender: TObject);
    procedure RxDBLookupCombo8Change(Sender: TObject);
    procedure RxDBLookupCombo7Change(Sender: TObject);
    procedure RxDBLookupCombo4Change(Sender: TObject);
    procedure RxDBLookupCombo2Change(Sender: TObject);
    procedure RxDBLookupCombo3Change(Sender: TObject);
    procedure dxDBGrid3DblClick(Sender: TObject);
    procedure bsSkinButton11Click(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
   function UpdateBillStatus(bsStStatus:string):Boolean;
  end;

var
  frm_op_seae_teshushenhe: Tfrm_op_seae_teshushenhe;

implementation

uses my_sys_function, u_main, my_sys_chat;

{$R *.dfm}

function Tfrm_op_seae_teshushenhe.UpdateBillStatus(bsStStatus:string):Boolean;
var aAdoQuery,aAdoQuerySelect:TAdoQuery;
begin


{var aAdoQuery:TAdoQuery;
begin
  result:=False;
  aAdoQuery:=CreateAdoQuery;
  with aAdoQuery do
  try
    Close;Sql.Clear;
    SQL.Add('select count(编号) c from  t_op_fangdan');
    SQL.Add('where 编号=:编号');
    Parameters.ParamByName('编号').Value:=BsNo;
    Open;
    if aAdoQuery.FieldByName('c').AsInteger=0 then
    begin
      Close;Sql.Clear;
      SQL.Add('Insert into t_op_fangdan (编号,  放单状态,申请人,申请日期)');
      SQL.Add('values                   (:编号,:放单状态,:申请人,:申请日期)');
      Parameters.ParamByName('编号').Value:=BsNo;
      Parameters.ParamByName('放单状态').Value:='申请放单';
      Parameters.ParamByName('申请人').Value:=employee;
      Parameters.ParamByName('申请日期').Value:=date;
      ExecSQL;
    end;
  finally
    aAdoQuery.Free;
  end;
}


  result:=False;
  aAdoQuery:=CreateAdoQuery;
  aAdoQuerySelect:=CreateAdoQuery;
  with t_op_seaesel do
  try
    Open;First;
    while not eof do
    begin
      aAdoQuerySelect.Close;aAdoQuerySelect.Sql.Clear;
      aAdoQuerySelect.SQL.Add('select count(编号) c from  t_op_fangdan');
      aAdoQuerySelect.SQL.Add('where 编号=:编号');
      aAdoQuerySelect.Parameters.ParamByName('编号').Value:=fieldByName('编号').AsString;
      aAdoQuerySelect.Open;
      if aAdoQuerySelect.FieldByName('c').AsInteger=0 then
      begin
        aAdoQuery.Close;aAdoQuery.Sql.Clear;
        aAdoQuery.SQL.Add('Insert into t_op_fangdan (编号,  放单状态)');
        aAdoQuery.SQL.Add('values                   (:编号,:放单状态)');
        aAdoQuery.Parameters.ParamByName('编号').Value:=fieldByName('编号').AsString;
        aAdoQuery.Parameters.ParamByName('放单状态').Value:=bsStStatus;
        aAdoQuery.ExecSQL;
      end
      else
      begin
        aAdoQuery.Close;aAdoQuery.Sql.Clear;
        aAdoQuery.SQL.Add('Update t_op_fangdan set 放单状态=:放单状态');
        aAdoQuery.SQL.Add('where 编号=:编号');
        aAdoQuery.Parameters.ParamByName('编号').Value:=fieldByName('编号').AsString;
        aAdoQuery.Parameters.ParamByName('放单状态').Value:=bsStStatus;
        aAdoQuery.ExecSQL;
      end;
      Next;
    end;
  finally
    aAdoQuery.Free;
    aAdoQuerySelect.Free;
  end;
end;


procedure Tfrm_op_seae_teshushenhe.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  savereggrid(dxdbgrid2,caption);
  savereggrid(dxdbgrid3,caption+'1');
  frm_op_seae_teshushenhe.Hide;
  frm_op_seae_teshushenhe.ManualFloat(frm_op_seae_teshushenhe.BoundsRect );
  frm_main.freeTabs('frm_op_seae_teshushenhe');
  action:=cafree;
  frm_op_seae_teshushenhe:=nil;
end;

procedure Tfrm_op_seae_teshushenhe.FormShow(Sender: TObject);
begin
  with t_op_bill do
  begin
    Parameters.ParamByName('Employee').Value:=Employee;
    Open;
  end;
  t_op_seaesel.Open;
end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton3Click(Sender: TObject);
begin
  if t_op_bill.State in [dsedit,dsinsert] then
    t_op_bill.Post;
end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton7Click(Sender: TObject);
begin
  if t_op_bill.IsEmpty then
    exit;
  t_op_bill.Cancel;
end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton8Click(Sender: TObject);
begin
  Close;
end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton5Click(Sender: TObject);
begin
 if t_op_bill.IsEmpty then
    exit;

  if t_op_bill.FieldByName('业务审核日期').IsNull then
  begin
    showmessage('销售没有审核,不能审核！');
    Exit;
  end
  else
  begin
    t_op_bill.edit;
    t_op_bill['状态']:='主管审核';
    t_op_bill['签单日期']:=Now;
    t_op_bill['签单人']:=employee;
    t_op_bill.post;
    UpdateBillStatus('主管审核');

    with t_op_seaesel do
    begin
      First;
      while not eof do
      begin
        InsertSeaeStatus(FieldByName('编号').AsString,'主管审核',employee,FormatDateTime('YYYY-MM-DD',Now));
       Next;
      end;
    end;


    t_op_bill.Refresh;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton9Click(Sender: TObject);
var str:string;
begin
  if t_op_bill.IsEmpty then
    exit;

  if t_op_bill.FieldByName('签单日期').IsNull then
  begin
    showmessage('没有审核,不用取消审核！！');
    Exit;
  end
  else
  if (not t_op_bill.FieldByName('签单日期').IsNull)  and t_op_bill.FieldByName('副总审核日期').IsNull then
  begin
    t_op_bill.edit;
    t_op_bill.FieldByName('主管驳回原因').AsString:=t_op_bill.FieldByName('主管驳回原因').AsString+#13#10+employee+' '+FormatDateTime('YYYY-MM-DD hh:ss',Now);
    t_op_bill['状态']:='新建签单';
    t_op_bill['签单日期']:=null;
    t_op_bill['业务审核日期']:=null;
    t_op_bill.post;


  //  UpdateBillStatus('销售审核');

    with t_op_seaesel do
    begin
      First;
      while not eof do
      begin
        DelteSeaeStatus(fieldbyname('编号').AsString,'主管审核');
        Next;
      end;
    end;

    with t_op_seaesel do
    begin
      First;
      while not eof do
      begin
        DelteSeaeStatus(fieldbyname('编号').AsString,'销售审核');
        Next;
      end;
    end;

    t_op_bill.Refresh;
  end
  else
    showmessage('副总已经审核不能取消审核,副总取消审核后才可以审核！');

end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton38Click(Sender: TObject);
begin
    t_op_bill.Refresh;
end;

procedure Tfrm_op_seae_teshushenhe.dxDBGrid2Click(Sender: TObject);
begin
  bsSkinPageControl1.ActivePageIndex:=1;
end;

procedure Tfrm_op_seae_teshushenhe.N16Click(Sender: TObject);
begin
  grid_save_xls(dxdbgrid2);
end;

procedure Tfrm_op_seae_teshushenhe.RxDBLookupCombo8Change(Sender: TObject);
begin
  if  t_op_bill.FieldByName('状态').AsString<>'新建签单'  then
  begin
    ShowMessage('当前状态'+t_op_bill.FieldByName('状态').AsString+'不能修改');
    t_op_bill.Cancel;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.RxDBLookupCombo7Change(Sender: TObject);
begin
  if  t_op_bill.FieldByName('状态').AsString<>'新建签单'  then
  begin
    ShowMessage('当前状态'+t_op_bill.FieldByName('状态').AsString+'不能修改');
    t_op_bill.Cancel;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.RxDBLookupCombo4Change(Sender: TObject);
begin
  if  t_op_bill.FieldByName('状态').AsString<>'新建签单'  then
  begin
    ShowMessage('当前状态'+t_op_bill.FieldByName('状态').AsString+'不能修改');
    t_op_bill.Cancel;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.RxDBLookupCombo2Change(Sender: TObject);
begin
  if  t_op_bill.FieldByName('状态').AsString<>'新建签单'  then
  begin
    ShowMessage('当前状态'+t_op_bill.FieldByName('状态').AsString+'不能修改');
    t_op_bill.Cancel;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.RxDBLookupCombo3Change(Sender: TObject);
begin
  if  t_op_bill.FieldByName('状态').AsString<>'新建签单'  then
  begin
    ShowMessage('当前状态'+t_op_bill.FieldByName('状态').AsString+'不能修改');
    t_op_bill.Cancel;
  end;

end;

procedure Tfrm_op_seae_teshushenhe.dxDBGrid3DblClick(Sender: TObject);
begin
  fee_view(t_op_seaesel.fieldbyname('编号').asstring);

end;

procedure Tfrm_op_seae_teshushenhe.bsSkinButton11Click(Sender: TObject);
begin
  with t_op_bill do
  begin
    Close;
    sql.Clear;
    sql.Add('select * from t_op_bill_fangdan');
    sql.Add('where 操作日期 between :date1 and :date2 and 业务审核=:业务审核');
    sql.Add('order by BILL_ID DESC');
    Parameters.ParamByName('date1').Value:=wwDBDateTimePicker6.Date;
    Parameters.ParamByName('date2').Value:=wwDBDateTimePicker7.Date;
    Parameters.ParamByName('业务审核').Value:=RxDBLookupCombo1.value;
    Open;
  end;

end;

end.