unit u_op_airtruck;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, bsSkinCtrls, ExtCtrls, XPMenu, Menus, DB, ADODB, dxExEdtr,
  dxDBGrid, dxDBTLCl, dxGrClms, dxTL, dxDBCtrl, dxCntner, RxLookup,
  StdCtrls, Mask, DBCtrls, ComCtrls, bsSkinTabs, u_op_sate, u_fee,
  wwdbdatetimepicker, wwdbedit, Wwdotdot, Wwdbcomb, u_op_letter_free,
  wwdblook, bsdbctrls, Grids, DBGridEh, Wwdbigrd, Wwdbgrid, u_op_card,IniFiles;

type
  Tfrm_op_airtruck = class(TForm)
    Panel2: TPanel;
    bsSkinButton7: TbsSkinButton;
    bsSkinButton6: TbsSkinButton;
    bsSkinButton9: TbsSkinButton;
    bsSkinButton10: TbsSkinButton;
    bsSkinButton1: TbsSkinButton;
    bsSkinButton11: TbsSkinButton;
    bsSkinButton8: TbsSkinButton;
    bsSkinButton2: TbsSkinButton;
    bsSkinButton4: TbsSkinButton;
    bsSkinButton3: TbsSkinButton;
    bsSkinButton5: TbsSkinButton;
    Notebook1: TNotebook;
    t_op_airtruck: TADOQuery;
    t_op_airtruck1: TDataSource;
    PopupMenu1: TPopupMenu;
    N31: TMenuItem;
    t_ch_fee: TADOQuery;
    XPMenu1: TXPMenu;
    dxDBGrid1: TdxDBGrid;
    dxDBGrid1Column1: TdxDBGridMaskColumn;
    dxDBGrid1Column2: TdxDBGridMaskColumn;
    dxDBGrid1Column3: TdxDBGridMaskColumn;
    dxDBGrid1Column4: TdxDBGridDateColumn;
    dxDBGrid1Column5: TdxDBGridDateColumn;
    dxDBGrid1Column6: TdxDBGridMaskColumn;
    dxDBGrid1Column7: TdxDBGridMaskColumn;
    dxDBGrid1Column8: TdxDBGridMaskColumn;
    dxDBGrid1Column10: TdxDBGridMaskColumn;
    dxDBGrid1Column11: TdxDBGridMaskColumn;
    dxDBGrid1Column12: TdxDBGridMaskColumn;
    dxDBGrid1Column13: TdxDBGridMaskColumn;
    dxDBGrid1Column14: TdxDBGridMaskColumn;
    dxDBGrid1Column17: TdxDBGridMaskColumn;
    dxDBGrid1Column18: TdxDBGridMaskColumn;
    dxDBGrid1Column21: TdxDBGridMaskColumn;
    dxDBGrid1Column22: TdxDBGridMaskColumn;
    dxDBGrid1Column23: TdxDBGridMaskColumn;
    dxDBGrid1Column24: TdxDBGridMaskColumn;
    dxDBGrid1Column25: TdxDBGridDateColumn;
    dxDBGrid1Column26: TdxDBGridMaskColumn;
    dxDBGrid1Column19: TdxDBGridColumn;
    bsSkinPanel1: TbsSkinPanel;
    Label1: TLabel;
    Label2: TLabel;
    Label17: TLabel;
    Label3: TLabel;
    Label37: TLabel;
    Label5: TLabel;
    Label38: TLabel;
    Label4: TLabel;
    Label36: TLabel;
    DBEdit1: TDBEdit;
    DBEdit2: TDBEdit;
    RxDBLookupCombo13: TRxDBLookupCombo;
    DBEdit3: TDBEdit;
    DBEdit8: TDBEdit;
    DBEdit4: TDBEdit;
    DBEdit9: TDBEdit;
    RxDBLookupCombo1: TRxDBLookupCombo;
    DBEdit7: TDBEdit;
    bsSkinPageControl1: TbsSkinPageControl;
    bsSkinTabSheet1: TbsSkinTabSheet;
    bsSkinTabSheet2: TbsSkinTabSheet;
    bsSkinTabSheet3: TbsSkinTabSheet;
    fra_fee1: Tfra_fee;
    fra_op_state1: Tfra_op_state;
    Label85: TLabel;
    Label86: TLabel;
    Label10: TLabel;
    RxDBLookupCombo7: TRxDBLookupCombo;
    Label96: TLabel;
    DBEdit30: TDBEdit;
    DBEdit31: TDBEdit;
    Label97: TLabel;
    wwDBDateTimePicker2: TwwDBDateTimePicker;
    Label25: TLabel;
    wwDBDateTimePicker1: TwwDBDateTimePicker;
    Label6: TLabel;
    Label164: TLabel;
    RxDBLookupCombo11: TRxDBLookupCombo;
    Label23: TLabel;
    RxDBLookupCombo8: TRxDBLookupCombo;
    Label110: TLabel;
    DBMemo18: TDBMemo;
    Label111: TLabel;
    DBMemo19: TDBMemo;
    dxDBGrid1Column27: TdxDBGridColumn;
    Label13: TLabel;
    wwDBComboBox3: TwwDBComboBox;
    Label65: TLabel;
    DBEdit18: TDBEdit;
    dxDBGrid1Column28: TdxDBGridColumn;
    bsSkinButton13: TbsSkinButton;
    Label19: TLabel;
    RxDBLookupCombo12: TRxDBLookupCombo;
    Label41: TLabel;
    Label27: TLabel;
    RxDBLookupCombo29: TRxDBLookupCombo;
    RxDBLookupCombo30: TRxDBLookupCombo;
    Label42: TLabel;
    PopupMenu2: TPopupMenu;
    N10: TMenuItem;
    N11: TMenuItem;
    N14: TMenuItem;
    N13: TMenuItem;
    N12: TMenuItem;
    N15: TMenuItem;
    N16: TMenuItem;
    PopupMenu3: TPopupMenu;
    N37: TMenuItem;
    N38: TMenuItem;
    N17: TMenuItem;
    N18: TMenuItem;
    N34: TMenuItem;
    N35: TMenuItem;
    N36: TMenuItem;
    N1: TMenuItem;
    N2: TMenuItem;
    N3: TMenuItem;
    N4: TMenuItem;
    N5: TMenuItem;
    N6: TMenuItem;
    N7: TMenuItem;
    RxDBLookupCombo31: TRxDBLookupCombo;
    bsSkinTabSheet4: TbsSkinTabSheet;
    fra_op_letter_free1: Tfra_op_letter_free;
    wwDBLookupCombo52: TwwDBLookupCombo;
    wwDBLookupCombo1: TwwDBLookupCombo;
    N8: TMenuItem;
    N9: TMenuItem;
    N19: TMenuItem;
    N20: TMenuItem;
    N21: TMenuItem;
    N22: TMenuItem;
    N23: TMenuItem;
    N24: TMenuItem;
    dxDBGrid1Column29: TdxDBGridColumn;
    bsSkinPanel2: TbsSkinPanel;
    bsSkinDBText1: TbsSkinDBText;
    N25: TMenuItem;
    N26: TMenuItem;
    bsSkinTabSheet5: TbsSkinTabSheet;
    Label34: TLabel;
    RxDBLookupCombo16: TRxDBLookupCombo;
    DBMemo3: TDBMemo;
    Label35: TLabel;
    RxDBLookupCombo17: TRxDBLookupCombo;
    DBMemo4: TDBMemo;
    Label39: TLabel;
    RxDBLookupCombo18: TRxDBLookupCombo;
    DBMemo5: TDBMemo;
    bsSkinPanel3: TbsSkinPanel;
    bsSkinPanel5: TbsSkinPanel;
    Label7: TLabel;
    Label9: TLabel;
    RxDBLookupCombo2: TRxDBLookupCombo;
    RxDBLookupCombo3: TRxDBLookupCombo;
    Label11: TLabel;
    Label12: TLabel;
    DBEdit5: TDBEdit;
    DBEdit6: TDBEdit;
    Label14: TLabel;
    DBEdit10: TDBEdit;
    Label15: TLabel;
    t_op_airtruckdetail1: TDataSource;
    t_op_airtruckdetail: TADOQuery;
    wwDBGrid1: TwwDBGrid;
    wwDBLookupCombo2: TwwDBLookupCombo;
    bsSkinPanel7: TbsSkinPanel;
    t_op_airtruckdetailprn: TADOQuery;
    IntegerField1: TIntegerField;
    StringField1: TStringField;
    StringField2: TStringField;
    StringField3: TStringField;
    StringField4: TStringField;
    StringField5: TStringField;
    StringField6: TStringField;
    IntegerField2: TIntegerField;
    StringField7: TStringField;
    BCDField1: TBCDField;
    BCDField2: TBCDField;
    BCDField3: TBCDField;
    IntegerField3: TIntegerField;
    StringField8: TStringField;
    BooleanField1: TBooleanField;
    DateTimeField1: TDateTimeField;
    StringField9: TStringField;
    IntegerField4: TIntegerField;
    StringField10: TStringField;
    StringField11: TStringField;
    t_op_airtruckdetailprn1: TDataSource;
    bsSkinButton12: TbsSkinButton;
    bsSkinButton14: TbsSkinButton;
    bsSkinButton15: TbsSkinButton;
    bsSkinButton16: TbsSkinButton;
    bsSkinButton17: TbsSkinButton;
    Label16: TLabel;
    DBEdit14: TDBEdit;
    bsSkinTabSheet6: TbsSkinTabSheet;
    bsSkinPanel9: TbsSkinPanel;
    bsSkinPanel10: TbsSkinPanel;
    wwDBGrid3: TwwDBGrid;
    wwDBLookupCombo3: TwwDBLookupCombo;
    bsSkinPanel11: TbsSkinPanel;
    bsSkinButton23: TbsSkinButton;
    bsSkinButton24: TbsSkinButton;
    bsSkinButton25: TbsSkinButton;
    bsSkinButton26: TbsSkinButton;
    bsSkinButton27: TbsSkinButton;
    t_op_airtruckdetailhy1: TDataSource;
    t_op_airtruckdetailhy: TADOQuery;
    IntegerField5: TIntegerField;
    StringField12: TStringField;
    StringField13: TStringField;
    StringField14: TStringField;
    StringField15: TStringField;
    StringField16: TStringField;
    StringField17: TStringField;
    IntegerField6: TIntegerField;
    StringField18: TStringField;
    BCDField4: TBCDField;
    BCDField5: TBCDField;
    BCDField6: TBCDField;
    IntegerField7: TIntegerField;
    StringField19: TStringField;
    BooleanField2: TBooleanField;
    DateTimeField2: TDateTimeField;
    StringField20: TStringField;
    IntegerField8: TIntegerField;
    StringField21: TStringField;
    StringField22: TStringField;
    bsSkinGroupBox1: TbsSkinGroupBox;
    Label33: TLabel;
    wwDBDateTimePicker3: TwwDBDateTimePicker;
    Label40: TLabel;
    wwDBDateTimePicker4: TwwDBDateTimePicker;
    Label43: TLabel;
    wwDBLookupCombo4: TwwDBLookupCombo;
    Label44: TLabel;
    wwDBLookupCombo5: TwwDBLookupCombo;
    Label45: TLabel;
    RxDBLookupCombo10: TRxDBLookupCombo;
    DBMemo1: TDBMemo;
    Label46: TLabel;
    RxDBLookupCombo14: TRxDBLookupCombo;
    DBMemo2: TDBMemo;
    bsSkinSpeedButton1: TbsSkinSpeedButton;
    bsSkinTabSheet7: TbsSkinTabSheet;
    fra_op_card1: Tfra_op_card;
    Label8: TLabel;
    Label18: TLabel;
    RxDBLookupCombo4: TRxDBLookupCombo;
    Label20: TLabel;
    RxDBLookupCombo5: TRxDBLookupCombo;
    Label21: TLabel;
    DBEdit11: TDBEdit;
    Label22: TLabel;
    DBEdit12: TDBEdit;
    Label24: TLabel;
    DBEdit13: TDBEdit;
    Label26: TLabel;
    Label28: TLabel;
    RxDBLookupCombo6: TRxDBLookupCombo;
    Label29: TLabel;
    RxDBLookupCombo9: TRxDBLookupCombo;
    Label30: TLabel;
    DBEdit15: TDBEdit;
    Label31: TLabel;
    DBEdit16: TDBEdit;
    Label32: TLabel;
    DBEdit17: TDBEdit;
    wwDBComboBox1: TwwDBComboBox;
    PopupMenu4: TPopupMenu;
    SA1: TMenuItem;
    N27: TMenuItem;
    CA1: TMenuItem;
    N28: TMenuItem;
    N29: TMenuItem;
    N30: TMenuItem;
    N32: TMenuItem;
    wwDBComboBox2: TwwDBComboBox;
    wwDBComboBox4: TwwDBComboBox;
    Label47: TLabel;
    RxDBLookupCombo15: TRxDBLookupCombo;
    Label49: TLabel;
    DBEdit19: TDBEdit;
    Label50: TLabel;
    DBEdit20: TDBEdit;
    Label51: TLabel;
    DBEdit21: TDBEdit;
    Label48: TLabel;
    DBEdit22: TDBEdit;
    Label52: TLabel;
    wwDBDateTimePicker5: TwwDBDateTimePicker;
    wwDBComboBox5: TwwDBComboBox;
    wwDBComboBox6: TwwDBComboBox;
    wwDBLookupCombo6: TwwDBLookupCombo;
    wwDBLookupCombo7: TwwDBLookupCombo;
    t_op_airtruckdetailhyDSDesigner: TBooleanField;
    Label53: TLabel;
    wwDBComboBox7: TwwDBComboBox;
    bsSkinPanel4: TbsSkinPanel;
    Label116: TLabel;
    Label130: TLabel;
    Label131: TLabel;
    Label132: TLabel;
    Edit1: TEdit;
    Edit4: TEdit;
    Edit2: TEdit;
    Edit3: TEdit;
    bsSkinButton44: TbsSkinButton;
    bsSkinButton45: TbsSkinButton;
    procedure bsSkinButton7Click(Sender: TObject);
    procedure bsSkinButton6Click(Sender: TObject);
    procedure bsSkinButton2Click(Sender: TObject);
    procedure bsSkinButton4Click(Sender: TObject);
    procedure bsSkinButton3Click(Sender: TObject);
    procedure bsSkinButton5Click(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormShow(Sender: TObject);
    procedure bsSkinButton11Click(Sender: TObject);
    procedure bsSkinButton8Click(Sender: TObject);
    procedure Panel2Resize(Sender: TObject);
    procedure bsSkinButton1Click(Sender: TObject);
    procedure t_op_airtruckBeforeEdit(DataSet: TDataSet);
    procedure t_op_airtruckBeforePost(DataSet: TDataSet);
    procedure bsSkinButton10Click(Sender: TObject);
    procedure dxDBGrid1Column3CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure dxDBGrid1Column2CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure DBEdit1KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit2KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit3KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit4KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo1KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo13KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit8KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit9KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit7KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker2KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker1KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit5KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit10KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo6KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit30KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit31KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo11KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo7KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit18KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit2Change(Sender: TObject);
    procedure DBEdit3Change(Sender: TObject);
    procedure RxDBLookupCombo29KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo8KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo30KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBComboBox3KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo12Change(Sender: TObject);
    procedure RxDBLookupCombo8Change(Sender: TObject);
    procedure N10Click(Sender: TObject);
    procedure N14Click(Sender: TObject);
    procedure N12Click(Sender: TObject);
    procedure N16Click(Sender: TObject);
    procedure dxDBGrid1ColumnSorting(Sender: TObject;
      Column: TdxDBTreeListColumn; var Allow: Boolean);
    procedure bsSkinButton13Click(Sender: TObject);
    procedure N17Click(Sender: TObject);
    procedure N34Click(Sender: TObject);
    procedure N36Click(Sender: TObject);
    procedure N37Click(Sender: TObject);
    procedure RxDBLookupCombo31KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo1KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo52KeyPress(Sender: TObject; var Key: Char);
    procedure N9Click(Sender: TObject);
    procedure N20Click(Sender: TObject);
    procedure t_op_airtruckBeforeDelete(DataSet: TDataSet);
    procedure t_op_airtruckBeforeCancel(DataSet: TDataSet);
    procedure N21Click(Sender: TObject);
    procedure N24Click(Sender: TObject);
    procedure dxDBGrid1Column29CustomDraw(Sender: TObject;
      ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
      AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
      var AColor: TColor; ASelected, AFocused: Boolean;
      var ADone: Boolean);
    procedure N26Click(Sender: TObject);
    procedure bsSkinButton12Click(Sender: TObject);
    procedure bsSkinButton14Click(Sender: TObject);
    procedure t_op_airtruckdetailBeforeDelete(DataSet: TDataSet);
    procedure bsSkinButton15Click(Sender: TObject);
    procedure bsSkinButton16Click(Sender: TObject);
    procedure bsSkinButton17Click(Sender: TObject);
    procedure RxDBLookupCombo16Change(Sender: TObject);
    procedure RxDBLookupCombo17Change(Sender: TObject);
    procedure RxDBLookupCombo18Change(Sender: TObject);
    procedure t_op_airtruckdetailAfterInsert(DataSet: TDataSet);
    procedure RxDBLookupCombo16KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo17KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo18KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit14KeyPress(Sender: TObject; var Key: Char);
    procedure t_op_airtruckdetailhyAfterInsert(DataSet: TDataSet);
    procedure bsSkinButton23Click(Sender: TObject);
    procedure bsSkinButton24Click(Sender: TObject);
    procedure bsSkinButton25Click(Sender: TObject);
    procedure bsSkinButton26Click(Sender: TObject);
    procedure bsSkinButton27Click(Sender: TObject);
    procedure RxDBLookupCombo12KeyPress(Sender: TObject; var Key: Char);
    procedure t_op_airtruckdetailAfterPost(DataSet: TDataSet);
    procedure t_op_airtruckdetailhyAfterPost(DataSet: TDataSet);
    procedure t_op_airtruckdetailBeforeInsert(DataSet: TDataSet);
    procedure t_op_airtruckdetailhyBeforeInsert(DataSet: TDataSet);
    procedure RxDBLookupCombo10Change(Sender: TObject);
    procedure RxDBLookupCombo14Change(Sender: TObject);
    procedure RxDBLookupCombo16Enter(Sender: TObject);
    procedure RxDBLookupCombo16Exit(Sender: TObject);
    procedure bsSkinSpeedButton1Click(Sender: TObject);
    procedure N32Click(Sender: TObject);
    procedure N29Click(Sender: TObject);
    procedure CA1Click(Sender: TObject);
    procedure SA1Click(Sender: TObject);
    procedure bsSkinPageControl1Change(Sender: TObject);
    procedure RxDBLookupCombo11Change(Sender: TObject);
    procedure bsSkinButton9Click(Sender: TObject);
    procedure bsSkinButton44Click(Sender: TObject);
  private
    t_op_airtruckdetailno,t_op_airtruckdetailhyno,t_op_airtruckdetailsano:integer;
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frm_op_airtruck: Tfrm_op_airtruck;
  airtruckopen:boolean;

implementation

uses u_main, my_sys_function, u_op_airtruck_add, u_data_share, u_sys_progress,
  u_ch_piliang_airi, u_op_date_change;

{$R *.dfm}

procedure Tfrm_op_airtruck.bsSkinButton7Click(Sender: TObject);
begin
  table_Prior(t_op_airtruck);
end;

procedure Tfrm_op_airtruck.bsSkinButton6Click(Sender: TObject);
begin
  table_next(t_op_airtruck);
end;

procedure Tfrm_op_airtruck.bsSkinButton2Click(Sender: TObject);
begin
  table_post(t_op_airtruck);
end;

procedure Tfrm_op_airtruck.bsSkinButton4Click(Sender: TObject);
begin
  t_ch_fee.close;
  t_ch_fee.Parameters[0].value:=t_op_airtruck.fieldbyname('编号').asstring;
  t_ch_fee.open;
  if not t_ch_fee.IsEmpty then
  begin
    showmessage('对不起业务存在费用信息，不能删除！！');
    exit;
  end;
  table_delete(t_op_airtruck);
end;

procedure Tfrm_op_airtruck.bsSkinButton3Click(Sender: TObject);
begin
  table_cancel(t_op_airtruck);
end;

procedure Tfrm_op_airtruck.bsSkinButton5Click(Sender: TObject);
begin
  close;
end;

procedure Tfrm_op_airtruck.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  savereggrid(dxdbgrid1,caption);
  savewwgrid(fra_fee1.wwDBGrid1,'监管车应收');
  savewwgrid(fra_fee1.wwDBGrid2,'监管车应付');
  airtruckopen:=false;
  frm_op_airtruck.Hide;
  frm_op_airtruck.ManualFloat(frm_op_airtruck.BoundsRect );
  frm_main.freeTabs('frm_op_airtruck');
  action:=cafree;
  frm_op_airtruck:=nil;
end;

procedure Tfrm_op_airtruck.FormShow(Sender: TObject);
var inifile1:Tinifile;
begin
  Notebook1.PageIndex:=0;
  inifile1:=Tinifile.Create(ExtractFilePath(application.ExeName)+'main.ini');
  bsSkinPanel4.Visible:=inifile1.Readbool('other','aedisp',false);
  inifile1.free;
  Notebook1.Align:=alClient;
  if not ASSIGNED(frm_sys_progress) then
    frm_sys_progress:=tfrm_sys_progress.Create(self);
  frm_sys_progress.bsSkinGauge1.ProgressText:='加载数据请等候。。。';
  frm_sys_progress.Show;
  frm_sys_progress.bsSkinGauge1.MaxValue:=20;
  frm_sys_progress.bsSkinGauge1.MinValue:=0;
  frm_sys_progress.bsSkinGauge1.Value:=0;
  frm_sys_progress.Update;

  if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='自动取号' then begin
    DBEdit8.Width:=110;
    bsSkinSpeedButton1.Visible:=false;
    if frm_data_share.t_sys_noset.fieldbyname('是否允许手动编辑').AsBoolean then begin
      DBEdit8.ReadOnly:=false;
    end else begin
      DBEdit8.ReadOnly:=true;
    end;
  end else if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='手动取号' then begin
    DBEdit8.Width:=90;
    bsSkinSpeedButton1.Visible:=true;
    if frm_data_share.t_sys_noset.fieldbyname('是否允许手动编辑').AsBoolean then begin
      DBEdit8.ReadOnly:=false;
    end else begin
      DBEdit8.ReadOnly:=true;
    end;
  end else if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='手动编辑' then begin
    DBEdit8.ReadOnly:=false;
    DBEdit8.Width:=110;
    bsSkinSpeedButton1.Visible:=false;
  end;


  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select top 50 * from t_op_airtruck where '
                   +'(录入人='+''''+employee+''''
                   +' or 操作员='+''''+employee+''''
                   +' or 客服员='+''''+employee+''''+')'
                   +' order by 业务编号 DESC');
  t_op_airtruck.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  t_op_airtruckdetail.Open;
//  t_op_airtruckdetailsa.Open;
  t_op_airtruckdetailhy.Open;
  fra_op_letter_free1.op_type.Text:='空运进口';
  fra_op_letter_free1.t_op_letter.DataSource:=t_op_airtruck1;
  fra_op_letter_free1.t_op_letter.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  fra_op_letter_free1.t_op_letter_free_detail.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  loadreggrid(dxdbgrid1,false,caption);
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  if if_open('353') or if_open('354') then
  begin
    fra_fee1.edit_type.text:='5';
    fra_fee1.edit_data.text:='0005';
    fra_fee1.edit_report.text:='监管车管理';
    fra_fee1.t_ch_accept.DataSource:=t_op_airtruck1;
    if strtobool(get_parameters_value(150,'false')) then
      fra_fee1.bsSkinPanel3.Visible:=true;
    fra_fee1.DBEdit48.DataSource:=t_op_airtruck1;

    if if_open('353') then
    begin
      fra_fee1.t_ch_accept.DataSource:=t_op_airtruck1;
      if (strtobool(get_parameters_value(153,'false'))=true) then begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('351')=false) then
        begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'收'+''''+' and 编号=:编号 and (录入人='
            +''''+employee+''''+' or (录入人<>'+''''+employee+''''
            +' and 机密<>1) ) and '+open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end else begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'收'+''''+' and 编号=:编号 and '
            +open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_accept.open;
      end else begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('351')=false) then
        begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
          +''''+'收'+''''+' and 编号=:编号 and (录入人='
          +''''+employee+''''+' or (录入人<>'+''''+employee+''''
          +' and 机密<>1) ) order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_accept.open;
      end;
      fra_fee1.a_shen_delete.open;
      fra_fee1.a_shen_modify_old.open;
      fra_fee1.a_shen_modify_new.open;
      fra_fee1.Panel3.visible:=true;
    end
    else
      fra_fee1.Panel3.visible:=false;
    if if_open('354') then
    begin
      fra_fee1.t_ch_pay.DataSource:=t_op_airtruck1;
      if (strtobool(get_parameters_value(153,'false'))=true) then begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('351')=false) then
        begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'付'+''''+' and 编号=:编号 and (录入人='
            +''''+employee+''''+' or (录入人<>'+''''+employee+''''
            +' and 机密<>1) ) and '+open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end else begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'付'+''''+' and 编号=:编号 and '
            +open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_pay.open;
      end else begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('351')=false) then
        begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
          +''''+'付'+''''+' and 编号=:编号 and (录入人='
          +''''+employee+''''+' or (录入人<>'+''''+employee+''''
          +' and 机密<>1) ) order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_pay.open;
      end;
      fra_fee1.p_shen_delete.open;
      fra_fee1.p_shen_modify_old.open;
      fra_fee1.p_shen_modify_new.open;
      fra_fee1.Panel1.visible:=true;
    end
    else
      fra_fee1.Panel1.visible:=false;

    if fra_fee1.Panel1.visible and
       fra_fee1.Panel3.visible then
    begin
      if if_open('352') then begin
        fra_fee1.Panel8.Visible:=true;
        fra_fee1.Panel8.Height:=20;
      end else
        fra_fee1.Panel8.Visible:=false;

      fra_fee1.t_op_gain.DataSource:=t_op_airtruck1;
      fra_fee1.t_op_gain.open;

      fra_fee1.Panel9.Visible:=false;
    end
    else
    begin
      fra_fee1.Panel8.Visible:=false;
    end;
  end
  else
  begin
    fra_fee1.Visible:=false;
  end;

  loadwwgrid(fra_fee1.wwDBGrid1,'监管车应收');
  loadwwgrid(fra_fee1.wwDBGrid2,'监管车应付');

  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  fra_op_state1.edit_state.text:='4';
  fra_op_state1.t_op_state.DataSource:=t_op_airtruck1;
  fra_op_state1.t_op_state.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  fra_op_card1.t_op_card.DataSource:=t_op_airtruck1;
  fra_op_card1.t_op_card.open;

  frm_data_share.t_crm_client.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_hangkong.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_baoguan.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_weituo.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_daili.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_shiper.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_shouhuo.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_crm_client_tongzhi.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_code_source.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_sys_employee.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_code_code.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_code_fee.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_code_currency.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  frm_data_share.t_code_port_air.requery;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  bsSkinTabSheet2.TabVisible:=if_open('353') or if_open('354');
  airtruckopen:=true;
  frm_sys_progress.close;
  frm_sys_progress:=nil;

end;

procedure Tfrm_op_airtruck.bsSkinButton11Click(Sender: TObject);
var
  answer:TModalResult;
begin
  if bsSkinButton11.Caption='编辑修改' then
  begin
    Notebook1.PageIndex:=1;
    bsSkinButton11.Caption:='返回列表';
  end
  else
  begin
    if (t_op_airtruck.State=dsinsert)or(t_op_airtruck.State=dsedit) then
    BEGIN
      answer:=messagedlg( '数据已经修改，是否保存？',mtWarning,mbYesNoCancel,0);
      if answer=mrYes then
      begin
        t_op_airtruck.post;
      end;
      if answer=mrNo then
      begin
        t_op_airtruck.cancel;
      end;
      if answer=mrCancel then
      begin
        exit;
      end;
    END;
    Notebook1.PageIndex:=0;
    bsSkinButton11.Caption:='编辑修改';
  end;
end;

procedure Tfrm_op_airtruck.bsSkinButton8Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton8.ClientToScreen(Point(0,bsSkinButton8.Height));
  PopupMenu1.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_op_airtruck.Panel2Resize(Sender: TObject);
var
  i:integer;
begin
  i:=round(Panel2.Width/11);
  bsSkinButton7.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton10.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton8.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton13.Left:=Panel2.Width-bsSkinButton13.Width-20;
end;

procedure Tfrm_op_airtruck.bsSkinButton1Click(Sender: TObject);
begin
  if (t_op_airtruck.State=dsinsert)or(t_op_airtruck.State=dsedit) then
    t_op_airtruck.post;
  try
    frm_op_airtruck_add:=tfrm_op_airtruck_add.Create(self);
    frm_op_airtruck_add.data1.Enabled:=false;
    frm_op_airtruck_add.data1.DataSet:=t_op_airtruck;
    frm_op_airtruck_add.data1.Enabled:=true;
    frm_op_airtruck_add.ShowModal;
  finally
    frm_op_airtruck_add.Free;
  end;
end;

procedure Tfrm_op_airtruck.t_op_airtruckBeforeEdit(DataSet: TDataSet);
begin
 // op_befor_post(t_op_airi,'0004');
end;

procedure Tfrm_op_airtruck.t_op_airtruckBeforePost(DataSet: TDataSet);
begin
  table_before_post(t_op_airtruck,'委托单位');
  table_before_post(t_op_airtruck,'操作员');
  table_before_post(t_op_airtruck,'揽货人');
  table_before_post(t_op_airtruck,'客服员');
//  table_before_post(t_op_airtruck,'主提单号');
//  table_before_post(t_op_airtruck,'分提单号');
  table_before_post(t_op_airtruck,'发车日期');
  table_before_post(t_op_airtruck,'业务来源');
  table_before_post(t_op_airtruck,'销售部门');
  table_before_post(t_op_airtruck,'操作部门');

  if op_empty('t_op_airtruck',t_op_airtruck) then
    abort;

 if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='自动取号' then
   if t_op_airtruck.FieldByName('委托编号').IsNull or (trim(t_op_airtruck['委托编号'])='') then
      if Trim(frm_data_share.t_sys_noset.fieldbyname('日期规则').Asstring)='会计期间' then
        t_op_airtruck['委托编号']:=getwtno(5,subComp,department,employee,t_op_airtruck['会计期间'])
      else
        t_op_airtruck['委托编号']:=getwtno(5,subComp,department,employee,t_op_airtruck['发车日期']);


  if t_op_airtruck.fieldbyname('发车日期').oldvalue<>t_op_airtruck.fieldbyname('发车日期').asdatetime then
  if (t_op_airtruck.fieldbyname('业务类型').asstring<>'更改单') and (Logininfo.endday>=t_op_airtruck.fieldbyname('发车日期').asdatetime) then begin
     showmessage('此发车日期所在期间已月末结账,不能添加修改业务！！');
     abort;
  end;


  if t_op_airtruck.FieldByName('委托单位').OldValue<>t_op_airtruck.FieldByName('委托单位').asstring then
  begin
    if frm_data_share.t_crm_client_all.Locate('客户简称',t_op_airtruck.FieldByName('委托单位').asstring,[])then
    begin
      if frm_data_share.t_crm_client_all.fieldbyname('客户状态').asstring='封存客户'then
      begin
        showmessage('当前业务委托单位已经封存，不能再进行业务合作，如需合作请进行恢复客户操作！');
        abort;
      end;
    end;
  end;
  if t_op_airtruck.State=dsinsert then
  begin
    if t_op_airtruck.fieldbyname('业务编号').asstring=''then
    begin
      t_op_airtruck['业务编号']:=get_no(t_op_airtruck.fieldbyname('会计期间').AsDateTime,getbsno(Logininfo.AirTruckBsNo,'IT'));
      t_op_airtruck['编号']:=get_id;
    end;
    t_op_airtruck['业务状态']:='接受委托';
    t_op_airtruck['费用状态']:='录入状态';
  end;

  if strtobool(get_parameters_value(43,'false')) then
  begin
    if (trim(t_op_airtruck.fieldbyname('主提单号').asstring)='') or (t_op_airtruck.fieldbyname('业务类型').asstring='更改单') then
    begin
      t_op_airtruck['主提单标准']:=t_op_airtruck['编号'];
    end
    else
    begin
      t_op_airtruck['主提单标准']:=t_op_airtruck['主提单号'];
    end;
  end
  else
  begin
    t_op_airtruck['主提单标准']:=t_op_airtruck['编号'];
  end;

  if strtobool(get_parameters_value(44,'false')) then
  begin
    if (trim(t_op_airtruck.fieldbyname('分提单号').asstring)='') or (t_op_airtruck.fieldbyname('业务类型').asstring='更改单') then
    begin
      t_op_airtruck['分提单标准']:=t_op_airtruck['编号'];
    end
    else
    begin
      t_op_airtruck['分提单标准']:=t_op_airtruck['分提单号'];
    end;
  end
  else
  begin
    t_op_airtruck['分提单标准']:=t_op_airtruck['编号'];
  end;
  if strtobool(get_parameters_value(45,'false')) then
  begin
    if (trim(t_op_airtruck.fieldbyname('委托编号').asstring)='') or (t_op_airtruck.fieldbyname('业务类型').asstring='更改单') then
    begin
      t_op_airtruck['委托标准']:=t_op_airtruck['编号'];
    end
    else
    begin
      t_op_airtruck['委托标准']:=t_op_airtruck['委托编号'];
    end;
  end
  else
  begin
    t_op_airtruck['委托标准']:=t_op_airtruck['编号'];
  end;

  t_op_airtruck['upload']:=1;
end;

procedure Tfrm_op_airtruck.bsSkinButton10Click(Sender: TObject);
begin
  query_airtruck(1,'0005');
end;

procedure Tfrm_op_airtruck.dxDBGrid1Column3CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color_fee(ANode.strings[dxDBGrid1Column3.Index]);
  AFont.Color:=clblack;
end;

procedure Tfrm_op_airtruck.dxDBGrid1Column2CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color('空运进口',ANode.Strings[dxDBGrid1Column2.Index]);
  AFont.Color:=clblack;
end;

procedure Tfrm_op_airtruck.DBEdit1KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit2);
end;

procedure Tfrm_op_airtruck.DBEdit2KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit3);
end;

procedure Tfrm_op_airtruck.DBEdit3KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit4);
end;

procedure Tfrm_op_airtruck.DBEdit4KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit4);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo31);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo13KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit8);
end;

procedure Tfrm_op_airtruck.DBEdit8KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit9);
end;

procedure Tfrm_op_airtruck.DBEdit9KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit7);
end;

procedure Tfrm_op_airtruck.DBEdit7KeyPress(Sender: TObject; var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker2);
end;

procedure Tfrm_op_airtruck.wwDBDateTimePicker2KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker1);
end;

procedure Tfrm_op_airtruck.wwDBDateTimePicker1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo7);
end;

procedure Tfrm_op_airtruck.DBEdit5KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit10);
end;

procedure Tfrm_op_airtruck.DBEdit10KeyPress(Sender: TObject; var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo2);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo6KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit30);
end;

procedure Tfrm_op_airtruck.DBEdit30KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit31);
end;

procedure Tfrm_op_airtruck.DBEdit31KeyPress(Sender: TObject; var Key: Char);
begin
  key_DBEdit(Key,DBEdit14);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo11KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo18);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo7KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwDBLookupCombo52);
end;

procedure Tfrm_op_airtruck.DBEdit18KeyPress(Sender: TObject; var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo1);
end;

procedure Tfrm_op_airtruck.DBEdit2Change(Sender: TObject);
begin
  DBEdit2.Color:=dxgrid_color('空运出口',DBEdit2.text);
end;

procedure Tfrm_op_airtruck.DBEdit3Change(Sender: TObject);
begin
  DBEdit3.Color:=dxgrid_color_fee(DBEdit3.text);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo29KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo8);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo8KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo30);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo30KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo18);
//  key_wwDBComboBox(Key,wwDBComboBox3);
end;

procedure Tfrm_op_airtruck.wwDBComboBox3KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit30);  
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo12Change(Sender: TObject);
begin
  if (t_op_airtruck.state=dsinsert)or(t_op_airtruck.state=dsedit)then
  begin
    if RxDBLookupCombo12.DisplayValue='' then
      exit;
    if frm_data_share.t_sys_employee.locate('姓名',RxDBLookupCombo12.DisplayValue,[]) then
      t_op_airtruck['销售部门']:=frm_data_share.t_sys_employee['部门名称'];
  end;
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo8Change(Sender: TObject);
begin
  if (t_op_airtruck.state=dsinsert)or(t_op_airtruck.state=dsedit)then
  begin
    if RxDBLookupCombo8.DisplayValue='' then
      exit;
    if frm_data_share.t_sys_employee.locate('姓名',RxDBLookupCombo8.DisplayValue,[]) then
      t_op_airtruck['操作部门']:=frm_data_share.t_sys_employee['部门名称'];
  end;
end;

procedure Tfrm_op_airtruck.N10Click(Sender: TObject);
begin
  update_grid_view_no(dxdbgrid1);
end;

procedure Tfrm_op_airtruck.N14Click(Sender: TObject);
begin
  update_grid_view_all(dxdbgrid1);
end;

procedure Tfrm_op_airtruck.N12Click(Sender: TObject);
begin
 // update_grid(dxdbgrid1,59);
end;

procedure Tfrm_op_airtruck.N16Click(Sender: TObject);
begin
  grid_save_xls(dxdbgrid1);
end;

procedure Tfrm_op_airtruck.dxDBGrid1ColumnSorting(Sender: TObject;
  Column: TdxDBTreeListColumn; var Allow: Boolean);
begin
  Column_sort(Column,t_op_airtruck,'业务编号');
end;

procedure Tfrm_op_airtruck.bsSkinButton13Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton13.ClientToScreen(Point(0,bsSkinButton13.Height));
  PopupMenu3.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_op_airtruck.N17Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态='
                   +''''+'录入状态'+''''+') '
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.N34Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态 in ('
                   +''''+'驳回提交'+''''+','+''''+'禁止修改'+''''+','+''''+'禁止删除'+''''+')) '
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.N36Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态 in ('
                   +''''+'提交审核'+''''+','+''''+'申请修改'+''''+','+''''+'申请删除'+''''+')) '
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.N37Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('000','录入人','操作员','客服员','no','no')
                   +' and 编号 in (select distinct 编号 from t_op_state where 是否完成<>1) '
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo31KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo13);
end;

procedure Tfrm_op_airtruck.wwDBLookupCombo1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo16);
end;

procedure Tfrm_op_airtruck.wwDBLookupCombo52KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwDBLookupCombo1);
end;

procedure Tfrm_op_airtruck.N9Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号 not in (select distinct 编号 from t_ch_fee where 类型='+''''+'收'+''''+')'
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.N20Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号 not in (select distinct 编号 from t_ch_fee where 类型='+''''+'付'+''''+')'
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.t_op_airtruckBeforeDelete(DataSet: TDataSet);
begin
  op_befor_post(t_op_airtruck,'0005');
  if not t_op_airtruck.FieldByName('委托编号').IsNull then
  delwtno(t_op_airtruck['委托编号']);

//  delete_add(4,t_op_airi);
end;

procedure Tfrm_op_airtruck.t_op_airtruckBeforeCancel(DataSet: TDataSet);
begin
  delete_no(t_op_airtruck);
  if t_op_airtruck.State=dsinsert then
  if not t_op_airtruck.FieldByName('委托编号').IsNull then
   delwtno(t_op_airtruck['委托编号']);

end;

procedure Tfrm_op_airtruck.N21Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号 not in (select distinct 编号 from t_ch_fee )'
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.N24Click(Sender: TObject);
begin
  t_op_airtruck.Close;
  t_op_airtruck.SQL.clear;
  t_op_airtruck.SQL.Add('select * from t_op_airtruck where '
                   +open_data('0005','录入人','操作员','客服员','no','no')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号  in (select distinct 编号 from t_ch_fee where 费用状态<>'+''''+'结算完毕'+''''+')'
                   +' order by 业务编号 ');
  t_op_airtruck.open;
end;

procedure Tfrm_op_airtruck.dxDBGrid1Column29CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  if Trim(ANode.Strings[dxDBGrid1Column29.Index])='更改单' then
    AColor:=clred;
  AFont.Color:=clblack;

end;

procedure Tfrm_op_airtruck.N26Click(Sender: TObject);
begin
  if t_op_airtruck.IsEmpty then
    exit;
  if not do_data('0005',t_op_airtruck.FieldByName('录入人').asstring
                       ,t_op_airtruck.FieldByName('操作员').asstring
                       ,t_op_airtruck.FieldByName('揽货人').asstring
                       ,t_op_airtruck.FieldByName('客服员').asstring
                       ,'','') then
  begin
    showmessage('对不起你无权修改此数据！');
    abort;
  end;

  if t_op_airtruck.FieldByName('业务状态').asstring='业务封帐' then
  begin
    showmessage('此票业务状态已经为业务封帐状态，不能修改！');
    abort;
  end;

  if t_op_airtruck1=nil then
    exit;
  if (t_op_airtruck.State=dsinsert)or(t_op_airtruck.State=dsedit) then
    t_op_airtruck.post;
  try
    frm_op_date_change:=tfrm_op_date_change.Create (self);
     frm_op_date_change.DataSource1.Enabled:=false;
     frm_op_date_change.DataSource1.DataSet:=t_op_airtruck1.DataSet;
     frm_op_date_change.DataSource1.Enabled:=true;
    frm_op_date_change.ShowModal;
  finally
    frm_op_date_change.Free;
    frm_op_date_change:=nil;
  end;

end;

procedure Tfrm_op_airtruck.bsSkinButton12Click(Sender: TObject);
begin
  if not t_op_airtruck.Active then exit;
  if t_op_airtruck.IsEmpty then exit;

  t_op_airtruckdetail.Insert;

end;

procedure Tfrm_op_airtruck.bsSkinButton14Click(Sender: TObject);
begin
  if not t_op_airtruck.Active then exit;
  if t_op_airtruck.IsEmpty then exit;
  if t_op_airtruckdetail.State in [dsedit,dsinsert] then
    t_op_airtruckdetail.Post;

end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailBeforeDelete(
  DataSet: TDataSet);
begin
  if t_op_airtruck.FieldByName('业务状态').AsString='业务封帐' then begin
    showmessage('此票业务状态已经为业务封帐状态，不能修改！');
    abort;
  end;
end;

procedure Tfrm_op_airtruck.bsSkinButton15Click(Sender: TObject);
begin
  t_op_airtruckdetail.Delete;
end;

procedure Tfrm_op_airtruck.bsSkinButton16Click(Sender: TObject);
begin
  t_op_airtruckdetail.Cancel;
end;

procedure Tfrm_op_airtruck.bsSkinButton17Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton17.ClientToScreen(Point(0,bsSkinButton17.Height));
  PopupMenu4.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo16Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.State=dsinsert)or(t_op_airtruck1.DataSet.State=dsedit)then
  begin
    if RxDBLookupCombo16.DisplayValue<>'' then
      t_op_airtruck1.DataSet['发货人代码']:=frm_data_share.t_crm_client_shiper.fieldbyname('快捷代码').asstring;
  end;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo17Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.State=dsinsert)or(t_op_airtruck1.DataSet.State=dsedit)then
  begin
    if RxDBLookupCombo17.DisplayValue<>'' then
      t_op_airtruck1.DataSet['收货人代码']:=frm_data_share.t_crm_client_shouhuo.fieldbyname('快捷代码').asstring;
  end;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo18Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.State=dsinsert)or(t_op_airtruck1.DataSet.State=dsedit)then
  begin
    if RxDBLookupCombo18.DisplayValue<>'' then
      t_op_airtruck1.DataSet['通知人代码']:=frm_data_share.t_crm_client_tongzhi.fieldbyname('快捷代码').asstring;
  end;

end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailAfterInsert(
  DataSet: TDataSet);
begin
  t_op_airtruckdetail['编号']:=t_op_airtruck['编号'];
  t_op_airtruckdetail['序号']:=t_op_airtruckdetail.RecordCount;
  t_op_airtruckdetail['类型']:='BGS';
  t_op_airtruckdetail['是否拼出']:=0;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo16KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo3);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo17KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo4);
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo18KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo5);
end;

procedure Tfrm_op_airtruck.DBEdit14KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo19);
end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailhyAfterInsert(
  DataSet: TDataSet);
begin
  t_op_airtruckdetailhy['编号']:=t_op_airtruck['编号'];
  t_op_airtruckdetailhy['序号']:=t_op_airtruckdetailhy.RecordCount;
  t_op_airtruckdetailhy['是否拼出']:=1;

end;

procedure Tfrm_op_airtruck.bsSkinButton23Click(Sender: TObject);
begin
  if not t_op_airtruck.Active then exit;
  if t_op_airtruck.IsEmpty then exit;

  t_op_airtruckdetailhy.Insert;
end;

procedure Tfrm_op_airtruck.bsSkinButton24Click(Sender: TObject);
begin
  if not t_op_airtruck.Active then exit;
  if t_op_airtruck.IsEmpty then exit;
  if t_op_airtruckdetailhy.State in [dsedit,dsinsert] then
    t_op_airtruckdetailhy.Post;

end;

procedure Tfrm_op_airtruck.bsSkinButton25Click(Sender: TObject);
begin
  t_op_airtruckdetailhy.Delete;
end;

procedure Tfrm_op_airtruck.bsSkinButton26Click(Sender: TObject);
begin
  t_op_airtruckdetailhy.Cancel;
end;

procedure Tfrm_op_airtruck.bsSkinButton27Click(Sender: TObject);
begin
  sys_print('监管车拼出交接单',2,t_op_airtruck1,nil,nil,nil,t_op_airtruckdetailhy1,nil,nil,nil,nil,nil,nil);

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo12KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo29);

end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailAfterPost(DataSet: TDataSet);
var
  aQuery:TAdoQuery;
  pkgs,kgs,cbm:double;
begin

  aQuery:=CreateAdoQuery;
  try
    with aQuery do begin
      Close;SQL.Clear;
      sql.Add('select sum(件数) as 件数,sum(重量) as 重量,sum(尺码) as 尺码 from t_op_airtruckdetail where 编号='''+Dataset.fieldbyname('编号').AsString+'''');
      open;
      pkgs:=fieldbyname('件数').AsFloat;
      kgs:=fieldbyname('重量').AsFloat;
      cbm:=fieldbyname('尺码').AsFloat;
      if not IsEmpty then begin
//        t_op_airtruck.Edit;
//        t_op_airtruck.fieldbyname('件数').AsFloat:=pkgs;//
//        t_op_airtruck.fieldbyname('重量').AsFloat:=kgs;
//        t_op_airtruck.fieldbyname('尺码').AsFloat:=cbm;
//        t_op_airtruck.post;

        close;sql.clear;
        sql.Add('update t_op_airtruck set 件数='+floattostr(pkgs)+',重量='+floattostr(kgs)+',尺码='+floattostr(cbm)+' where 编号='''+Dataset.fieldbyname('编号').AsString+'''');
        ExecSQL;

      end;
    end;

  finally
    FreeAndNil(aQuery);
  end;

end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailhyAfterPost(
  DataSet: TDataSet);
var
  aQuery:TAdoQuery;
  pkgs,kgs,cbm:double;
begin
  aQuery:=CreateAdoQuery;
  try
    with aQuery do begin
      Close;SQL.Clear;
      sql.Add('select sum(件数) as 件数,sum(重量) as 重量,sum(尺码) as 尺码 from t_op_airtruckdetail where 编号='''+Dataset.fieldbyname('编号').AsString+'''');
      open;
      pkgs:=fieldbyname('件数').AsFloat;
      kgs:=fieldbyname('重量').AsFloat;
      cbm:=fieldbyname('尺码').AsFloat;
      if not IsEmpty then begin
//        t_op_airtruck.Edit;
//        t_op_airtruck.fieldbyname('件数').AsFloat:=pkgs;
//        t_op_airtruck.fieldbyname('重量').AsFloat:=kgs;
//        t_op_airtruck.fieldbyname('尺码').AsFloat:=cbm;
//        t_op_airtruck.post;
        close;sql.clear;
        sql.Add('update t_op_airtruck set 件数='+floattostr(pkgs)+',重量='+floattostr(kgs)+',尺码='+floattostr(cbm)+' where 编号='''+Dataset.fieldbyname('编号').AsString+'''');
        ExecSQL;
//        t_op_airtruck.Refresh;
      end;
    end;
  finally
    FreeAndNil(aQuery);
  end;//  t_op_airtruckdetail.Requery;
end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailBeforeInsert(
  DataSet: TDataSet);
begin
  if t_op_airtruck.FieldByName('业务状态').AsString='业务封帐' then begin
    showmessage('此票业务状态已经为业务封帐状态，不能修改！');
    abort;
  end;
  if t_op_airtruckdetail.Recordset.RecordCount=0 then
    t_op_airtruckdetailno:=1
  else
    t_op_airtruckdetailno:=t_op_airtruckdetail['序号']-1;

end;

procedure Tfrm_op_airtruck.t_op_airtruckdetailhyBeforeInsert(
  DataSet: TDataSet);
begin
  if t_op_airtruck.FieldByName('业务状态').AsString='业务封帐' then begin
    showmessage('此票业务状态已经为业务封帐状态，不能修改！');
    abort;
  end;
  if t_op_airtruckdetailhy.Recordset.RecordCount=0 then
    t_op_airtruckdetailhyno:=1
  else
    t_op_airtruckdetailhyno:=t_op_airtruckdetailhy['序号']-1;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo10Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.State=dsinsert)or(t_op_airtruck1.DataSet.State=dsedit)then
  begin
    if RxDBLookupCombo10.DisplayValue<>'' then
      t_op_airtruck1.DataSet['回程发货人代码']:=frm_data_share.t_crm_client_shiper.fieldbyname('快捷代码').asstring;
  end;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo14Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.State=dsinsert)or(t_op_airtruck1.DataSet.State=dsedit)then
  begin
    if RxDBLookupCombo14.DisplayValue<>'' then
      t_op_airtruck1.DataSet['回程收货人代码']:=frm_data_share.t_crm_client_shouhuo.fieldbyname('快捷代码').asstring;
  end;

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo16Enter(Sender: TObject);
begin
  RxLookupComboEnter(TRxDBLookupCombo(Sender));

end;

procedure Tfrm_op_airtruck.RxDBLookupCombo16Exit(Sender: TObject);
begin
  RxLookupComboExit(TRxDBLookupCombo(Sender));
end;

procedure Tfrm_op_airtruck.bsSkinSpeedButton1Click(Sender: TObject);
begin
  if t_op_airtruck1.DataSet.FieldByName('委托编号').IsNull or (t_op_airtruck1.DataSet['委托编号']='') then begin
    t_op_airtruck1.DataSet.edit;
    if Trim(frm_data_share.t_sys_noset.fieldbyname('日期规则').Asstring)='会计期间' then
      t_op_airtruck1.DataSet['委托编号']:=getwtno(5,subComp,department,employee,t_op_airtruck1.DataSet['会计期间'])
    else
      t_op_airtruck1.DataSet['委托编号']:=getwtno(5,subComp,department,employee,t_op_airtruck1.DataSet['发车日期']);
   end;
end;

procedure Tfrm_op_airtruck.N32Click(Sender: TObject);
begin
  sys_print('BGS监管车全部',2,t_op_airtruck1,nil,nil,nil,t_op_airtruckdetail1,nil,nil,nil,nil,nil,nil);

end;

procedure Tfrm_op_airtruck.N29Click(Sender: TObject);
var
  i:integer;
  str:widestring;
begin
  if t_op_airtruckdetail.IsEmpty then
    exit;
  if wwDBGrid1.SelectedList.Count>=1 then
  begin
    for i:=0 to wwDBGrid1.SelectedList.Count-1 do
    begin
      t_op_airtruckdetail.GotoBookmark(pointer(wwDBGrid1.SelectedList[i]));
      if i=0 then
        str:='('+t_op_airtruckdetail.fieldbyname('TD_ID').asstring
      else
        str:=str+','+t_op_airtruckdetail.fieldbyname('TD_ID').asstring;
    end;
  end
  else
  begin
    str:='('+t_op_airtruckdetail.fieldbyname('TD_ID').asstring;
  end;
  str:=str+')';
  t_op_airtruckdetailprn.close;
  t_op_airtruckdetailprn.sql.clear;
  t_op_airtruckdetailprn.sql.add('select * from t_op_airtruckdetail '
    +'where 是否拼出<>1 and TD_ID in '+str
    +' order by 类型,序号');
  t_op_airtruckdetailprn.open;

  sys_print('BGS监管车选择',2,t_op_airtruck1,nil,nil,t_op_airtruckdetail1,t_op_airtruckdetailprn1,nil,nil,nil,nil,nil,nil);

end;

procedure Tfrm_op_airtruck.CA1Click(Sender: TObject);
begin
  if t_op_airtruckdetail.IsEmpty then
    exit;
  t_op_airtruckdetailprn.close;
  t_op_airtruckdetailprn.sql.clear;
  t_op_airtruckdetailprn.sql.add('select * from t_op_airtruckdetail '
    +'where 是否拼出<>1 and 发货人=:发货人 and  编号=:编号 '
    +' order by 类型,序号');
  t_op_airtruckdetailprn.Parameters.ParamByName('发货人').Value:=t_op_airtruckdetail.fieldbyname('发货人').AsString;
  t_op_airtruckdetailprn.Parameters.ParamByName('编号').Value:=t_op_airtruckdetail.fieldbyname('编号').AsString;
  t_op_airtruckdetailprn.open;

  sys_print('BGS监管车选择',2,t_op_airtruck1,nil,nil,t_op_airtruckdetail1,t_op_airtruckdetailprn1,nil,nil,nil,nil,nil,nil);

end;

procedure Tfrm_op_airtruck.SA1Click(Sender: TObject);
begin
  if t_op_airtruckdetail.IsEmpty then
    exit;
  t_op_airtruckdetailprn.close;
  t_op_airtruckdetailprn.sql.clear;
  t_op_airtruckdetailprn.sql.add('select * from t_op_airtruckdetail '
    +'where 是否拼出<>1 and 类型=:类型 and  编号=:编号 '
    +' order by 类型,序号');
  t_op_airtruckdetailprn.Parameters.ParamByName('类型').Value:=t_op_airtruckdetail.fieldbyname('类型').AsString;
  t_op_airtruckdetailprn.Parameters.ParamByName('编号').Value:=t_op_airtruckdetail.fieldbyname('编号').AsString;
  t_op_airtruckdetailprn.open;

  sys_print('BGS监管车选择',2,t_op_airtruck1,nil,nil,t_op_airtruckdetail1,t_op_airtruckdetailprn1,nil,nil,nil,nil,nil,nil);


end;

procedure Tfrm_op_airtruck.bsSkinPageControl1Change(Sender: TObject);
begin
  if not airtruckopen then exit;

  if bsSkinPageControl1.ActivePage<>bsSkinTabSheet1 then begin
    if t_op_airtruck.State in [dsedit,dsinsert] then
      t_op_airtruck.Post;
  end else begin
    t_op_airtruck.Refresh;
  end;
end;

procedure Tfrm_op_airtruck.RxDBLookupCombo11Change(Sender: TObject);
begin
  if t_op_airtruck1.DataSet=nil then
    exit;
  if (t_op_airtruck1.DataSet.state=dsinsert)or(t_op_airtruck1.DataSet.state=dsedit)then
  begin
    if RxDBLookupCombo11.DisplayValue='' then
      exit;
        t_op_airtruck1.DataSet.fieldbyname('货物描述').asstring:=t_op_airtruck1.DataSet.fieldbyname('货物描述').asstring+#13#10+frm_data_share.t_code_goods['货物描述'];
        if frm_data_share.t_code_goods.FieldByName('商品编码').AsString<>'' then
        t_op_airtruck1.DataSet.fieldbyname('商品编码').asstring:=t_op_airtruck1.DataSet.fieldbyname('商品编码').asstring+#13#10+frm_data_share.t_code_goods['商品编码'];
//    if trim(t_op_seae2.DataSet.fieldbyname('货物描述').asstring)=''then
//     DBMemo39.Lines.Append(frm_data_share.t_code_goods['货物描述']);
//     TMemoField(t_op_seae2.Fieldbyname('货物描述')).
//     :=frm_data_share.t_code_goods['货物描述'];
  end;

end;

procedure Tfrm_op_airtruck.bsSkinButton9Click(Sender: TObject);
begin
  sys_print('监管车业务',2,t_op_airtruck1,nil,nil,nil,t_op_airtruckdetail1,nil,nil,nil,nil,nil,nil);

end;

procedure Tfrm_op_airtruck.bsSkinButton44Click(Sender: TObject);
var
  str,airepsqlstr:widestring;
begin
  //快捷查询
  str:='';
  str:=query_tiaojian(1,str,'t_op_airtruck.业务编号','模糊',Edit1.text);
  str:=query_tiaojian(1,str,'t_op_airtruck.委托编号','模糊',Edit4.text);
  str:=query_tiaojian(1,str,'t_op_airtruck.主提单号','模糊',Edit2.text);
  str:=query_tiaojian(1,str,'t_op_airtruck.分提单号','模糊',Edit3.text);

  if trim(str)='' then
  begin
    str:='where '+open_data('0006','t_op_airtruck.录入人',
    't_op_airtruck.操作员','t_op_airtruck.客服员','no','no');
  end
  else
  begin
    str:=str+' and '+open_data('0006','t_op_airtruck.录入人',
         't_op_airtruck.操作员','t_op_airtruck.客服员','no','no');
  end;

  str:='select * from t_op_airtruck where 编号=编号 and 编号 in (select 编号 from t_op_airtruck '
          +str+')';//;+default_sort(55,'t_op_airtruck','','desc');


 if (not t_op_airtruck.IsEmpty) and (t_op_airtruck.sql.Text<>'') then
 t_op_airtruck.close;
 t_op_airtruck.sql.clear;
 t_op_airtruck.sql.add(str);
 t_op_airtruck.Open;
 if t_op_airtruck.IsEmpty then
 begin
   showmessage('没有检索出所需数据！！');
   exit;
 end;

end;

end.