unit u_op_seai_apply;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, dxExEdtr, Menus, DB, ADODB, bsSkinCtrls, u_op_card, u_fee,
  u_op_sate, bsdbctrls, StdCtrls, DBCtrls, RxLookup, wwdbdatetimepicker,
  Mask, wwdblook, ComCtrls, bsSkinTabs, dxDBTLCl, dxGrClms, dxDBGrid, dxTL,
  dxDBCtrl, dxCntner, ExtCtrls, XPMenu;

type
  Tfrm_op_seai_apply = class(TForm)
    Panel2: TPanel;
    bsSkinButton7: TbsSkinButton;
    bsSkinButton6: TbsSkinButton;
    bsSkinButton9: TbsSkinButton;
    bsSkinButton10: TbsSkinButton;
    bsSkinButton1: TbsSkinButton;        
    bsSkinButton11: TbsSkinButton;
    bsSkinButton2: TbsSkinButton;
    bsSkinButton4: TbsSkinButton;
    bsSkinButton3: TbsSkinButton;
    bsSkinButton5: TbsSkinButton;
    bsSkinButton38: TbsSkinButton;
    Notebook1: TNotebook;
    dxDBGrid1: TdxDBGrid;
    dxDBGrid1Column1: TdxDBGridMaskColumn;
    dxDBGrid1Column2: TdxDBGridMaskColumn;
    dxDBGrid1Column3: TdxDBGridMaskColumn;
    dxDBGrid1Column4: TdxDBGridDateColumn;
    dxDBGrid1Column5: TdxDBGridMaskColumn;
    dxDBGrid1Column6: TdxDBGridMaskColumn;
    dxDBGrid1Column7: TdxDBGridMaskColumn;
    dxDBGrid1Column8: TdxDBGridMaskColumn;
    dxDBGrid1Column9: TdxDBGridMaskColumn;
    dxDBGrid1Column10: TdxDBGridMaskColumn;
    dxDBGrid1Column11: TdxDBGridMaskColumn;
    dxDBGrid1Column12: TdxDBGridDateColumn;
    dxDBGrid1Column13: TdxDBGridMaskColumn;
    dxDBGrid1Column14: TdxDBGridMaskColumn;
    dxDBGrid1Column15: TdxDBGridMaskColumn;
    dxDBGrid1Column16: TdxDBGridMaskColumn;
    dxDBGrid1Column17: TdxDBGridColumn;
    dxDBGrid1Column18: TdxDBGridMaskColumn;
    dxDBGrid1Column19: TdxDBGridDateColumn;
    dxDBGrid1Column20: TdxDBGridMaskColumn;
    dxDBGrid1Column21: TdxDBGridMaskColumn;
    dxDBGrid1Column22: TdxDBGridMaskColumn;
    dxDBGrid1Column23: TdxDBGridMaskColumn;
    dxDBGrid1Column24: TdxDBGridMaskColumn;
    dxDBGrid1Column25: TdxDBGridCheckColumn;
    dxDBGrid1Column26: TdxDBGridCheckColumn;
    dxDBGrid1Column27: TdxDBGridCheckColumn;
    dxDBGrid1Column28: TdxDBGridDateColumn;
    dxDBGrid1Column29: TdxDBGridMaskColumn;
    dxDBGrid1Column31: TdxDBGridMaskColumn;
    dxDBGrid1Column32: TdxDBGridMaskColumn;
    dxDBGrid1Column33: TdxDBGridMaskColumn;
    dxDBGrid1Column34: TdxDBGridMaskColumn;
    dxDBGrid1Column40: TdxDBGridMaskColumn;
    dxDBGrid1Column41: TdxDBGridMaskColumn;
    dxDBGrid1Column42: TdxDBGridMaskColumn;
    dxDBGrid1Column43: TdxDBGridMaskColumn;
    dxDBGrid1Column44: TdxDBGridMaskColumn;
    dxDBGrid1Column45: TdxDBGridMaskColumn;
    dxDBGrid1Column46: TdxDBGridMaskColumn;
    dxDBGrid1Column47: TdxDBGridColumn;
    dxDBGrid1Column48: TdxDBGridDateColumn;
    dxDBGrid1Column49: TdxDBGridDateColumn;
    dxDBGrid1Column50: TdxDBGridMaskColumn;
    dxDBGrid1Column51: TdxDBGridDateColumn;
    dxDBGrid1Column52: TdxDBGridDateColumn;
    dxDBGrid1Column53: TdxDBGridDateColumn;
    dxDBGrid1Column54: TdxDBGridDateColumn;
    dxDBGrid1Column55: TdxDBGridMaskColumn;
    dxDBGrid1Column56: TdxDBGridMaskColumn;
    dxDBGrid1Column57: TdxDBGridMaskColumn;
    bsSkinPageControl1: TbsSkinPageControl;
    bsSkinTabSheet1: TbsSkinTabSheet;
    Label125: TLabel;
    Label126: TLabel;
    Label15: TLabel;
    Label7: TLabel;
    Label124: TLabel;
    Label73: TLabel;
    Label19: TLabel;
    Label20: TLabel;
    Label42: TLabel;
    Label16: TLabel;
    Label6: TLabel;
    Label8: TLabel;
    Label10: TLabel;
    Label11: TLabel;
    Label13: TLabel;
    Label14: TLabel;
    Label18: TLabel;
    Label21: TLabel;
    Label22: TLabel;
    Label23: TLabel;
    Label24: TLabel;
    Label25: TLabel;
    Label26: TLabel;
    Label164: TLabel;
    Label27: TLabel;
    Label165: TLabel;
    Label166: TLabel;
    Label167: TLabel;
    Label28: TLabel;
    Label29: TLabel;
    Label30: TLabel;
    Label31: TLabel;
    Label32: TLabel;
    Label33: TLabel;
    Label34: TLabel;
    Label35: TLabel;
    Label39: TLabel;
    Label40: TLabel;
    Label41: TLabel;
    Label43: TLabel;
    Label44: TLabel;
    Label46: TLabel;
    wwDBLookupCombo49: TwwDBLookupCombo;
    DBEdit63: TDBEdit;
    wwDBDateTimePicker2: TwwDBDateTimePicker;
    wwDBLookupCombo3: TwwDBLookupCombo;
    wwDBLookupCombo52: TwwDBLookupCombo;
    RxDBLookupCombo20: TRxDBLookupCombo;
    RxDBLookupCombo12: TRxDBLookupCombo;
    RxDBLookupCombo29: TRxDBLookupCombo;
    RxDBLookupCombo30: TRxDBLookupCombo;
    RxDBLookupCombo14: TRxDBLookupCombo;
    DBEdit5: TDBEdit;
    DBEdit6: TDBEdit;
    DBEdit12: TDBEdit;
    DBEdit13: TDBEdit;
    DBEdit14: TDBEdit;
    DBEdit15: TDBEdit;
    DBEdit16: TDBEdit;
    DBEdit17: TDBEdit;
    DBEdit19: TDBEdit;
    wwDBDateTimePicker1: TwwDBDateTimePicker;
    wwDBDateTimePicker3: TwwDBDateTimePicker;
    DBMemo39: TDBMemo;
    DBMemo2: TDBMemo;
    DBMemo40: TDBMemo;
    DBMemo41: TDBMemo;
    DBMemo42: TDBMemo;
    DBMemo1: TDBMemo;
    DBEdit81: TDBEdit;
    wwDBLookupCombo61: TwwDBLookupCombo;
    DBEdit20: TDBEdit;
    DBEdit21: TDBEdit;
    DBEdit22: TDBEdit;
    wwDBDateTimePicker4: TwwDBDateTimePicker;
    wwDBDateTimePicker5: TwwDBDateTimePicker;
    wwDBDateTimePicker6: TwwDBDateTimePicker;
    wwDBDateTimePicker7: TwwDBDateTimePicker;
    wwDBDateTimePicker8: TwwDBDateTimePicker;
    DBEdit23: TDBEdit;
    DBMemo3: TDBMemo;
    bsSkinDBCheckRadioBox1: TbsSkinDBCheckRadioBox;
    bsSkinDBCheckRadioBox2: TbsSkinDBCheckRadioBox;
    bsSkinDBCheckRadioBox3: TbsSkinDBCheckRadioBox;
    RxDBLookupCombo7: TRxDBLookupCombo;
    bsSkinTabSheet2: TbsSkinTabSheet;
    fra_op_state1: Tfra_op_state;
    bsSkinTabSheet3: TbsSkinTabSheet;
    fra_fee1: Tfra_fee;
    bsSkinTabSheet4: TbsSkinTabSheet;
    fra_op_card1: Tfra_op_card;
    bsSkinPanel1: TbsSkinPanel;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label37: TLabel;
    Label5: TLabel;
    Label38: TLabel;
    Label4: TLabel;
    Label65: TLabel;
    Label17: TLabel;
    DBEdit1: TDBEdit;
    DBEdit2: TDBEdit;
    DBEdit3: TDBEdit;
    DBEdit8: TDBEdit;
    DBEdit4: TDBEdit;
    DBEdit9: TDBEdit;
    RxDBLookupCombo1: TRxDBLookupCombo;
    DBEdit18: TDBEdit;
    t_op_seai: TADOQuery;
    t_op_seai1: TDataSource;
    t_ch_fee: TADOQuery;
    PopupMenu3: TPopupMenu;
    N37: TMenuItem;
    N38: TMenuItem;
    N62: TMenuItem;
    N25: TMenuItem;
    N64: TMenuItem;
    N63: TMenuItem;
    N17: TMenuItem;
    N18: TMenuItem;
    N34: TMenuItem;
    N35: TMenuItem;
    N36: TMenuItem;
    XPMenu1: TXPMenu;
    PopupMenu2: TPopupMenu;
    N10: TMenuItem;
    N11: TMenuItem;
    N14: TMenuItem;
    N13: TMenuItem;
    N12: TMenuItem;
    N15: TMenuItem;
    N16: TMenuItem;
    DBEdit11: TDBEdit;
    bsSkinPanel2: TbsSkinPanel;
    Label48: TLabel;
    Edit1: TEdit;
    Label50: TLabel;
    Edit2: TEdit;
    Label47: TLabel;
    Edit3: TEdit;
    Label45: TLabel;
    Edit4: TEdit;
    Label57: TLabel;
    Edit5: TEdit;
    Label58: TLabel;
    Edit6: TEdit;
    Label54: TLabel;
    RxDBLookupCombo4: TRxDBLookupCombo;
    Label56: TLabel;
    RxDBLookupCombo5: TRxDBLookupCombo;
    Label49: TLabel;
    wwDBDateTimePicker9: TwwDBDateTimePicker;
    Label52: TLabel;
    wwDBDateTimePicker12: TwwDBDateTimePicker;
    Label51: TLabel;
    wwDBDateTimePicker11: TwwDBDateTimePicker;
    Label53: TLabel;
    wwDBDateTimePicker13: TwwDBDateTimePicker;
    bsSkinButton8: TbsSkinButton;
    bsSkinButton12: TbsSkinButton;
    bsSkinButton13: TbsSkinButton;
    dxDBGrid1Column58: TdxDBGridColumn;
    dxDBGrid1Column59: TdxDBGridColumn;
    dxDBGrid1Column60: TdxDBGridColumn;
    dxDBGrid1Column61: TdxDBGridColumn;
    Label36: TLabel;
    DBEdit7: TDBEdit;
    Button1: TButton;
    Button2: TButton;
    dxDBGrid1Column62: TdxDBGridColumn;
    t_op_seai_danwei: TADOQuery;
    t_op_seai_danwei1: TDataSource;
    wwDBLookupCombo1: TwwDBLookupCombo;
    Label81: TLabel;
    Label80: TLabel;
    Label12: TLabel;
    RxDBLookupCombo2: TRxDBLookupCombo;
    Label55: TLabel;
    DBEdit10: TDBEdit;
    bsSkinButton14: TbsSkinButton;
    PopupMenu1: TPopupMenu;
    N1: TMenuItem;
    Label9: TLabel;
    RxDBLookupCombo3: TRxDBLookupCombo;
    Label61: TLabel;
    RxDBLookupCombo31: TRxDBLookupCombo;
    bsSkinSpeedButton1: TbsSkinSpeedButton;
    dxDBGrid1Column63: TdxDBGridColumn;
    RxDBLookupCombo8: TRxDBLookupCombo;
    Label59: TLabel;
    DBEdit24: TDBEdit;
    dxDBGrid1Column64: TdxDBGridColumn;
    bsSkinDBCheckRadioBox4: TbsSkinDBCheckRadioBox;
    dxDBGrid1Column65: TdxDBGridCheckColumn;
    bsSkinDBCheckRadioBox16: TbsSkinDBCheckRadioBox;
    bsSkinDBCheckRadioBox18: TbsSkinDBCheckRadioBox;
    Label112: TLabel;
    RxDBLookupCombo43: TRxDBLookupCombo;
    Label111: TLabel;
    DBEdit40: TDBEdit;
    Label60: TLabel;
    DBEdit25: TDBEdit;
    Label62: TLabel;
    RxDBLookupCombo6: TRxDBLookupCombo;
    Label83: TLabel;
    DBEdit26: TDBEdit;
    wwDBLookupCombo10: TwwDBLookupCombo;
    wwDBLookupCombo2: TwwDBLookupCombo;
    wwDBLookupCombo4: TwwDBLookupCombo;
    procedure bsSkinButton5Click(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure Panel2Resize(Sender: TObject);
    procedure bsSkinButton7Click(Sender: TObject);
    procedure bsSkinButton6Click(Sender: TObject);
    procedure bsSkinButton2Click(Sender: TObject);
    procedure bsSkinButton9Click(Sender: TObject);
    procedure bsSkinButton11Click(Sender: TObject);
    procedure bsSkinButton4Click(Sender: TObject);
    procedure bsSkinButton3Click(Sender: TObject);
    procedure bsSkinButton38Click(Sender: TObject);
    procedure bsSkinButton13Click(Sender: TObject);
    procedure t_op_seaiBeforeCancel(DataSet: TDataSet);
    procedure t_op_seaiBeforeDelete(DataSet: TDataSet);
    procedure t_op_seaiBeforeEdit(DataSet: TDataSet);
    procedure t_op_seaiBeforePost(DataSet: TDataSet);
    procedure t_op_seaiPostError(DataSet: TDataSet; E: EDatabaseError;
      var Action: TDataAction);
    procedure N37Click(Sender: TObject);
    procedure N62Click(Sender: TObject);
    procedure N64Click(Sender: TObject);
    procedure N17Click(Sender: TObject);
    procedure N34Click(Sender: TObject);
    procedure N36Click(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure bsSkinButton1Click(Sender: TObject);
    procedure bsSkinButton10Click(Sender: TObject);
    procedure N10Click(Sender: TObject);
    procedure N14Click(Sender: TObject);
    procedure N12Click(Sender: TObject);
    procedure N16Click(Sender: TObject);
    procedure bsSkinButton8Click(Sender: TObject);
    procedure bsSkinButton12Click(Sender: TObject);
    procedure DBEdit1KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit2KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit3KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit4KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit18KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit9KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit5KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo1KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit8KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker2KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo3KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit81KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit6KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo49KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo52KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit11KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo20KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo7KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit12KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit13KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit14KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit15KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit16KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker1KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker3KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo61KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit20KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit21KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker8KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit23KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit63KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit17KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit19KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit22KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker4KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker5KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker6KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBDateTimePicker7KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit7KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo1Enter(Sender: TObject);
    procedure RxDBLookupCombo1Exit(Sender: TObject);
    procedure RxDBLookupCombo2Exit(Sender: TObject);
    procedure RxDBLookupCombo2Enter(Sender: TObject);
    procedure RxDBLookupCombo7Enter(Sender: TObject);
    procedure RxDBLookupCombo7Exit(Sender: TObject);
    procedure Button1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    procedure wwDBLookupCombo1KeyPress(Sender: TObject; var Key: Char);
    procedure bsSkinButton14Click(Sender: TObject);
    procedure N1Click(Sender: TObject);
    procedure RxDBLookupCombo31KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit10KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo2KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBLookupCombo1Change(Sender: TObject);
    procedure bsSkinSpeedButton1Click(Sender: TObject);
    procedure RxDBLookupCombo6Enter(Sender: TObject);
    procedure RxDBLookupCombo6Exit(Sender: TObject);
    procedure RxDBLookupCombo6KeyPress(Sender: TObject; var Key: Char);
    procedure dxDBGrid1Column2CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure dxDBGrid1Column3CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure RxDBLookupCombo8Change(Sender: TObject);
    procedure RxDBLookupCombo1Change(Sender: TObject);
    procedure Notebook1PageChanged(Sender: TObject);
    procedure DBEdit26Click(Sender: TObject);
    procedure wwDBLookupCombo10KeyPress(Sender: TObject; var Key: Char);
  private
    { Private declarations }
    procedure setconcolor;

  public
    { Public declarations }
  end;

var
  frm_op_seai_apply: Tfrm_op_seai_apply;

implementation

uses my_sys_function, u_main, u_sys_progress, u_data_share,
  u_op_seai_apply_add, u_op_add_code, u_op_date_change, u_op_ctn;

{$R *.dfm}

procedure Tfrm_op_seai_apply.setconcolor;
  procedure consetcolor(fielname:String);
  var
    i:integer;
    scolor:string;
  begin
    scolor:=get_parameters_value(144,'clInfoBk');
    with bsSkinTabSheet1 do begin 
      for i:=0 to ControlCount-1 do begin
         if Controls[i] is TDBEdit then begin
           if TDBEdit(Controls[i]).DataField=fielname then begin
             TDBEdit(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end else if Controls[i] is TwwDBDateTimePicker then begin
           if TwwDBDateTimePicker(Controls[i]).DataField=fielname then begin
             TwwDBDateTimePicker(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end else if Controls[i] is TDBMemo then begin
           if TDBMemo(Controls[i]).DataField=fielname then begin
             TDBMemo(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end else if Controls[i] is TwwDBLookupCombo then begin
           if TwwDBLookupCombo(Controls[i]).DataField=fielname then begin
             TwwDBLookupCombo(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end;
      end;
    end;
    with bsSkinPanel1 do begin
      for i:=0 to ControlCount-1 do begin
         if Controls[i] is TDBEdit then begin
           if TDBEdit(Controls[i]).DataField=fielname then begin
             TDBEdit(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end else if Controls[i] is TwwDBLookupCombo then begin
           if TwwDBLookupCombo(Controls[i]).DataField=fielname then begin
             TwwDBLookupCombo(Controls[i]).Color:=StringToColor(scolor);
             exit;
           end;
         end;
      end;
    end;

  end;
begin
//必填项设置不能颜色

  frm_data_share.t_code_empty.Filtered:=false;
  frm_data_share.t_code_empty.Filter:='表=''t_op_seai''';
  frm_data_share.t_code_empty.Filtered:=true;
  frm_data_share.t_code_empty.First;
  while not frm_data_share.t_code_empty.Eof do
  begin
    if (frm_data_share.t_code_empty.fieldbyname('字段名称').asstring='分提单号') or (frm_data_share.t_code_empty.fieldbyname('字段名称').asstring='分提单号') then begin
      if t_op_seai1.DataSet.FindField('装运方式')<>nil then begin
        if pos('主票',t_op_seai1.DataSet.FieldByName('装运方式').asstring)>0 then begin
        end else begin
          consetcolor(frm_data_share.t_code_empty.fieldbyname('字段名称').asstring);
        end;
      end else begin
        consetcolor(frm_data_share.t_code_empty.fieldbyname('字段名称').asstring);
      end;
    end else begin
      consetcolor(frm_data_share.t_code_empty.fieldbyname('字段名称').asstring);
    end;
    frm_data_share.t_code_empty.next;
  end;

end;


procedure Tfrm_op_seai_apply.bsSkinButton5Click(Sender: TObject);
begin
  close;
end;

procedure Tfrm_op_seai_apply.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  savereggrid(dxdbgrid1,caption);
  frm_op_seai_apply.Hide;
  frm_op_seai_apply.ManualFloat(frm_op_seai_apply.BoundsRect );
  frm_main.freeTabs('frm_op_seai_apply');
  action:=cafree;
  frm_op_seai_apply:=nil;
end;

procedure Tfrm_op_seai_apply.Panel2Resize(Sender: TObject);
var
  i:integer;
begin
  i:=round(Panel2.Width/12);
  bsSkinButton7.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton10.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton14.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton38.Width:=i;
end;

procedure Tfrm_op_seai_apply.bsSkinButton7Click(Sender: TObject);
begin
  table_Prior(t_op_seai);
end;

procedure Tfrm_op_seai_apply.bsSkinButton6Click(Sender: TObject);
begin
  table_next(t_op_seai);
end;

procedure Tfrm_op_seai_apply.bsSkinButton2Click(Sender: TObject);
begin
  table_post(t_op_seai);
end;

procedure Tfrm_op_seai_apply.bsSkinButton9Click(Sender: TObject);
begin
  sys_print('海运进口报关报检',2,t_op_seai1,nil,nil,nil,nil,nil,nil,nil,nil,nil,nil);
end;

procedure Tfrm_op_seai_apply.bsSkinButton11Click(Sender: TObject);
var
  answer:TModalResult;
begin
  if bsSkinButton11.Caption='编辑修改' then
  begin
    Notebook1.PageIndex:=1;
    bsSkinButton11.Caption:='返回列表';
  end
  else
  begin
    if (t_op_seai.State=dsinsert)or(t_op_seai.State=dsedit) then
    BEGIN
      answer:=messagedlg( '数据已经修改，是否保存？',mtWarning,mbYesNoCancel,0);
      if answer=mrYes then
      begin
        t_op_seai.post;
      end;
      if answer=mrNo then
      begin
        t_op_seai.cancel;
      end;
      if answer=mrCancel then
      begin
        exit;
      end;
    END;
    Notebook1.PageIndex:=0;
    bsSkinButton11.Caption:='编辑修改';
  end;
end;

procedure Tfrm_op_seai_apply.bsSkinButton4Click(Sender: TObject);
begin
  t_ch_fee.close;
  t_ch_fee.Parameters[0].value:=t_op_seai.fieldbyname('编号').asstring;
  t_ch_fee.open;
  if not t_ch_fee.IsEmpty then
  begin
    showmessage('对不起业务存在费用信息，不能删除！！');
    exit;
  end;
  table_delete(t_op_seai);
end;

procedure Tfrm_op_seai_apply.bsSkinButton3Click(Sender: TObject);
begin
  table_cancel(t_op_seai);
end;

procedure Tfrm_op_seai_apply.bsSkinButton38Click(Sender: TObject);
var
  book1:Tbookmark;
begin
  book1:=t_op_seai.GetBookmark;
  t_op_seai.Refresh;
  t_op_seai.GotoBookmark(book1);
end;

procedure Tfrm_op_seai_apply.bsSkinButton13Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton13.ClientToScreen(Point(0,bsSkinButton13.Height));
  PopupMenu3.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_op_seai_apply.t_op_seaiBeforeCancel(DataSet: TDataSet);
begin
  delete_no(t_op_seai);
  if t_op_seai.State=dsinsert then
  if not t_op_seai.FieldByName('委托编号').IsNull then
   delwtno(t_op_seai['委托编号']);

end;

procedure Tfrm_op_seai_apply.t_op_seaiBeforeDelete(DataSet: TDataSet);
begin
  op_befor_post(t_op_seai,'0002');
  delete_add(2,t_op_seai);
  if not t_op_seai.FieldByName('委托编号').IsNull then
  delwtno(t_op_seai['委托编号']);
end;

procedure Tfrm_op_seai_apply.t_op_seaiBeforeEdit(DataSet: TDataSet);
begin
  op_befor_post(t_op_seai,'0002');
end;

procedure Tfrm_op_seai_apply.t_op_seaiBeforePost(DataSet: TDataSet);
var
  aQuery:TAdoQuery;
  str:String;
begin
  table_before_post(t_op_seai,'委托单位');
  table_before_post(t_op_seai,'操作员');
  table_before_post(t_op_seai,'揽货人');
  table_before_post(t_op_seai,'客服员');
  table_before_post(t_op_seai,'进口日期');
  table_before_post(t_op_seai,'销售部门');
  table_before_post(t_op_seai,'操作部门');

 if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='自动取号' then
   if t_op_seai.FieldByName('委托编号').IsNull or (trim(t_op_seai['委托编号'])='') then
      if Trim(frm_data_share.t_sys_noset.fieldbyname('日期规则').Asstring)='会计期间' then
        t_op_seai['委托编号']:=getwtno(2,subComp,department,employee,t_op_seai['会计期间'])
      else
        t_op_seai['委托编号']:=getwtno(2,subComp,department,employee,t_op_seai['进口日期']);


  if op_empty('t_op_seai',t_op_seai) then
    abort;

  if t_op_seai.fieldbyname('进口日期').oldvalue<>t_op_seai.fieldbyname('进口日期').asdatetime then
  if (t_op_seai.fieldbyname('业务类型').asstring<>'更改单') and (Logininfo.endday>=t_op_seai.fieldbyname('进口日期').asdatetime) then begin
     showmessage('此进口日期所在期间已月末结账,不能添加修改业务！！');
     abort;
  end;


  if t_op_seai.FieldByName('委托单位').OldValue<>t_op_seai.FieldByName('委托单位').asstring then
  begin
    if frm_data_share.t_crm_client_all.Locate('客户简称',t_op_seai.FieldByName('委托单位').asstring,[])then
    begin
      if frm_data_share.t_crm_client_all.fieldbyname('客户状态').asstring='封存客户'then
      begin
        showmessage('当前业务委托单位已经封存，不能再进行业务合作，如需合作请进行恢复客户操作！');
        abort;
      end;
    end; 
  end;
  if t_op_seai.State=dsinsert then
  begin
    if t_op_seai.fieldbyname('业务编号').asstring=''then
    begin
      t_op_seai['业务编号']:=get_no(t_op_seai.fieldbyname('会计期间').AsDateTime,getbsno(Logininfo.CustomImp,'BI'));
      t_op_seai['编号']:=get_id;
    end;
    t_op_seai['主编号']:=t_op_seai['编号'];
    t_op_seai['业务状态']:='接受委托';
    t_op_seai['费用状态']:='录入状态';

  end;

  if strtobool(get_parameters_value(34,'false')) then
  begin
    if (t_op_seai.fieldbyname('主提单号').asstring='') or ((not strtobool(get_parameters_value(151,'false'))) and (t_op_seai.fieldbyname('装运方式').asstring='报关')) then
    begin
      t_op_seai['主提单标准']:=t_op_seai['编号'];
    end
    else
    begin
      t_op_seai['主提单标准']:=t_op_seai['主提单号'];
    end;
  end
  else
  begin
    t_op_seai['主提单标准']:=t_op_seai['编号'];
  end;

  if strtobool(get_parameters_value(35,'false')) then
  begin
    if (t_op_seai.fieldbyname('分提单号').asstring='') or ((not strtobool(get_parameters_value(151,'false'))) and (t_op_seai.fieldbyname('装运方式').asstring='报关')) then
    begin
      t_op_seai['分提单标准']:=t_op_seai['编号'];
    end
    else
    begin
      t_op_seai['分提单标准']:=t_op_seai['分提单号'];
    end;
  end
  else
  begin
    t_op_seai['分提单标准']:=t_op_seai['编号'];
  end;
  if strtobool(get_parameters_value(36,'false')) then
  begin
    if (t_op_seai.fieldbyname('委托编号').asstring='') or ((not strtobool(get_parameters_value(151,'false'))) and (t_op_seai.fieldbyname('装运方式').asstring='报关')) then
    begin
      t_op_seai['委托标准']:=t_op_seai['编号'];
    end
    else
    begin
      t_op_seai['委托标准']:=t_op_seai['委托编号'];
    end;
  end
  else
  begin
    t_op_seai['委托标准']:=t_op_seai['编号'];
  end;
  if strtobool(get_parameters_value(60,'false')) then
  begin
    if (trim(t_op_seai.fieldbyname('报关单号').asstring)='') or ((not strtobool(get_parameters_value(151,'false'))) and (t_op_seai.fieldbyname('装运方式').asstring='报关')) then
    begin
      t_op_seai['报关标准']:=t_op_seai['编号'];
    end
    else
    begin
      t_op_seai['报关标准']:=t_op_seai['报关单号'];
    end;
  end
  else
  begin
    t_op_seai['报关标准']:=t_op_seai['编号'];
  end;
  if strtobool(get_parameters_value(61,'false')) then
  begin
    if (trim(t_op_seai.fieldbyname('报检单号').asstring)='') or ((not strtobool(get_parameters_value(151,'false'))) and (t_op_seai.fieldbyname('装运方式').asstring='报关')) then
    begin
      t_op_seai['报检标准']:=t_op_seai['编号'];
    end
    else
    begin
      t_op_seai['报检标准']:=t_op_seai['报检单号'];
    end;
  end
  else
  begin
    t_op_seai['报检标准']:=t_op_seai['编号'];
  end;

  if t_op_seai.fieldbyname('发票号').AsString<>'' then begin
    if t_op_seai.fieldbyname('发票号').OldValue<>t_op_seai.fieldbyname('发票号').NewValue then begin
      aQuery:=CreateAdoQuery;
      try
        with aQuery do begin
          Close;SQL.Clear;
          SQL.Add('select 编号 from t_op_seai where 发票号='''+t_op_seai.fieldbyname('发票号').AsString+''' and 编号<>'''+t_op_seai['编号']+'''');
          Open;
          if not IsEmpty then begin
            str:='select * from t_op_seai where 发票号='+''''+t_op_seai['发票号']+'''';
            double_seai(str,6);
          end;
        end;
      finally
        FreeAndNil(aQuery);
      end;
    end;
  end;


end;

procedure Tfrm_op_seai_apply.t_op_seaiPostError(DataSet: TDataSet;
  E: EDatabaseError; var Action: TDataAction);
var
  str:widestring;
begin
  if pos('SOME VALUES MAY HAVE BEEN CHANGED',UpperCase(E.Message))<>0 then
  begin
    showmessage('数据已经被其它用户修改，当前修改不能保存'+#13#10+'请刷新数据后重新录入');
    abort;
  end;
  if pos('主提单标准',UpperCase(E.Message))<>0 then
  begin
    str:='select * from t_op_seai where 主提单标准='+''''+t_op_seai['主提单标准']+'''';
    double_seai(str,1);
    abort;
  end;
  if pos('分提单标准',UpperCase(E.Message))<>0 then
  begin
    str:='select * from t_op_seai where 分提单标准='+''''+t_op_seai['分提单标准']+'''';
    double_seai(str,2);
    abort;
  end;
  if pos('委托标准',UpperCase(E.Message))<>0 then
  begin
    str:='select * from t_op_seai where 委托标准='+''''+t_op_seai['委托标准']+'''';
    double_seai(str,3);
    abort;
  end;
    if pos('报关标准',UpperCase(E.Message))<>0 then
  begin
    str:='select * from t_op_seai where 报关标准='+''''+t_op_seai['报关标准']+'''';
    double_seae(str,4);
    abort;
  end;
  if pos('报检标准',UpperCase(E.Message))<>0 then
  begin
    str:='select * from t_op_seai where 报检标准='+''''+t_op_seai['报检标准']+'''';
    double_seae(str,5);
    abort;
  end;
end;

procedure Tfrm_op_seai_apply.N37Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 编号 in (select distinct 编号 from t_op_state where 是否完成<>1) '
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.N62Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号 not in (select distinct 编号 from t_ch_fee where 类型='+''''+'收'+''''+')'
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.N64Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 费用状态<>'+''''+'费用封帐'+''''
                   +' and 编号 not in (select distinct 编号 from t_ch_fee where 类型='+''''+'付'+''''+')'
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.N17Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态='
                   +''''+'录入状态'+''''+') '
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.N34Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态 in ('
                   +''''+'驳回提交'+''''+','+''''+'禁止修改'+''''+','+''''+'禁止删除'+''''+')) '
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.N36Click(Sender: TObject);
begin
  t_op_seai.Close;
  t_op_seai.sql.clear;
  t_op_seai.sql.text:='select * from t_op_seai where '
                   +open_data('0002','揽货人','操作员','客服员','报关操作','报检操作')
                   +' and 编号 in (select distinct 编号 from t_ch_fee where 费用状态 in ('
                   +''''+'提交审核'+''''+','+''''+'申请修改'+''''+','+''''+'申请删除'+''''+')) '
                   +default_sort(54,'t_op_seai','','desc');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.FormShow(Sender: TObject);
begin
  Notebook1.PageIndex:=0;
  if not ASSIGNED(frm_sys_progress) then
    frm_sys_progress:=tfrm_sys_progress.Create(self);
  frm_sys_progress.bsSkinGauge1.ProgressText:='加载数据请等候。。。';
  frm_sys_progress.Show;
  frm_sys_progress.bsSkinGauge1.MaxValue:=28;
  frm_sys_progress.bsSkinGauge1.MinValue:=0;
  frm_sys_progress.bsSkinGauge1.Value:=0;
  frm_sys_progress.Update;

  bsSkinDBCheckRadioBox4.visible:=strtobool(get_parameters_value(160,'false'));


  if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='自动取号' then begin
    DBEdit8.Width:=110;
    bsSkinSpeedButton1.Visible:=false;
    if frm_data_share.t_sys_noset.fieldbyname('是否允许手动编辑').AsBoolean then begin
      DBEdit8.ReadOnly:=false;
    end else begin
      DBEdit8.ReadOnly:=true;
    end;
  end else if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='手动取号' then begin
    DBEdit8.Width:=90;
    bsSkinSpeedButton1.Visible:=true;
    if frm_data_share.t_sys_noset.fieldbyname('是否允许手动编辑').AsBoolean then begin
      DBEdit8.ReadOnly:=false;
    end else begin
      DBEdit8.ReadOnly:=true;
    end;
  end else if Trim(frm_data_share.t_sys_noset.fieldbyname('出号规则').Asstring)='手动编辑' then begin
    DBEdit8.ReadOnly:=false;
    DBEdit8.Width:=110;
    bsSkinSpeedButton1.Visible:=false;
  end;
  

  t_op_seai.Close;
  t_op_seai.SQL.clear;
  t_op_seai.SQL.Add('select top 100 * from t_op_seai where '
                   +'(录入人='+''''+employee+''''+' or 操作员='+''''+employee+''''
                   +' or 客服员='+''''+employee+''''+' or 报关操作='+''''+employee+''''
                   +' or 报检操作='+''''+employee+''''+')'
                   +default_sort(54,'t_op_seai','','desc'));
  t_op_seai.open;
  t_op_seai_danwei.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  fra_op_card1.t_op_card.DataSource:=t_op_seai1;
  fra_op_card1.t_op_card.open;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  loadreggrid(dxdbgrid1,false,caption);
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  if if_open('295') or if_open('296') then
  begin
    fra_fee1.edit_type.text:='2';
    fra_fee1.baoguan.text:='1';
    fra_fee1.edit_data.text:='0002';
    fra_fee1.edit_report.text:='海运进口';
    fra_fee1.t_ch_accept.DataSource:=t_op_seai1;
    if strtobool(get_parameters_value(150,'false')) then
      fra_fee1.bsSkinPanel3.Visible:=true;
    fra_fee1.DBEdit48.DataSource:=t_op_seai1;

    if if_open('295') then
    begin
      fra_fee1.t_ch_accept.DataSource:=t_op_seai1;
      if (strtobool(get_parameters_value(153,'false'))=true) then begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('207')=false) then
        begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'收'+''''+' and 编号=:编号 and (录入人='
            +''''+employee+''''+' or (录入人<>'+''''+employee+''''
            +' and 机密<>1) ) and '+open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end else begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'收'+''''+' and 编号=:编号 and '
            +open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_accept.open;
      end else begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('207')=false) then
        begin
          fra_fee1.t_ch_accept.close;
          fra_fee1.t_ch_accept.SQL.Clear;
          fra_fee1.t_ch_accept.SQL.Add('select * from t_ch_fee where 类型='
          +''''+'收'+''''+' and 编号=:编号 and (录入人='
          +''''+employee+''''+' or (录入人<>'+''''+employee+''''
          +' and 机密<>1) ) order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_accept.open;
      end;
      fra_fee1.a_shen_delete.open;
      fra_fee1.a_shen_modify_old.open;
      fra_fee1.a_shen_modify_new.open;
      fra_fee1.Panel3.visible:=true;
    end
    else
      fra_fee1.Panel3.visible:=false;
    if if_open('296') then
    begin
      fra_fee1.t_ch_pay.DataSource:=t_op_seai1;
      if (strtobool(get_parameters_value(153,'false'))=true) then begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('207')=false) then
        begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'付'+''''+' and 编号=:编号 and (录入人='
            +''''+employee+''''+' or (录入人<>'+''''+employee+''''
            +' and 机密<>1) ) and '+open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end else begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
            +''''+'付'+''''+' and 编号=:编号 and '
            +open_data('7000','录入人','no','no','no','no')
            +' order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_pay.open;
      end else begin
        if (strtobool(get_parameters_value(64,'false'))=true) and (if_open('207')=false) then
        begin
          fra_fee1.t_ch_pay.close;
          fra_fee1.t_ch_pay.SQL.Clear;
          fra_fee1.t_ch_pay.SQL.Add('select * from t_ch_fee where 类型='
          +''''+'付'+''''+' and 编号=:编号 and (录入人='
          +''''+employee+''''+' or (录入人<>'+''''+employee+''''
          +' and 机密<>1) ) order by 顺序,CH_ID');
        end;
        fra_fee1.t_ch_pay.open;
      end;  
      fra_fee1.p_shen_delete.open;
      fra_fee1.p_shen_modify_old.open;
      fra_fee1.p_shen_modify_new.open;
      fra_fee1.Panel1.visible:=true;
    end
    else
      fra_fee1.Panel1.visible:=false;

    if fra_fee1.Panel1.visible and
       fra_fee1.Panel3.visible then
    begin
      if if_open('254') then begin
        fra_fee1.Panel8.Visible:=true;
        fra_fee1.Panel8.Height:=20;
      end else
        fra_fee1.Panel8.Visible:=false;
      fra_fee1.t_op_gain.DataSource:=t_op_seai1;
      fra_fee1.t_op_gain.open;

      fra_fee1.Panel9.Visible:=false;
    end
    else
    begin
      fra_fee1.Panel8.Visible:=false;
    end;
  end
  else
  begin
    fra_fee1.Visible:=false;
  end;
  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
  
  fra_op_state1.edit_state.Text:='2';
  fra_op_state1.t_op_state.DataSource:=t_op_seai1;
  fra_op_state1.t_op_state.open;

  frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

  frm_sys_progress.close;
  frm_sys_progress:=nil;
end;

procedure Tfrm_op_seai_apply.bsSkinButton1Click(Sender: TObject);
begin
  if t_op_seai=nil then
    exit;
  if (t_op_seai.State=dsinsert)or(t_op_seai.State=dsedit) then
    t_op_seai.post;
  try
    frm_op_seai_apply_add:=tfrm_op_seai_apply_add.Create (self);
    frm_op_seai_apply_add.data1.Enabled:=false;
    frm_op_seai_apply_add.data1.DataSet:=t_op_seai;
    frm_op_seai_apply_add.data1.Enabled:=true;
    frm_op_seai_apply_add.ShowModal;
  finally
    frm_op_seai_apply_add.Free;
    if not frm_op_seai_apply.bsSkinTabSheet1.Showing then
      frm_op_seai_apply.bsSkinTabSheet1.Show;
    frm_op_seai_apply_add:=nil;
  end;
end;

procedure Tfrm_op_seai_apply.bsSkinButton10Click(Sender: TObject);
begin
  query_seai(10,'0002');
end;

procedure Tfrm_op_seai_apply.N10Click(Sender: TObject);
begin
  update_grid_view_no(dxdbgrid1);
end;

procedure Tfrm_op_seai_apply.N14Click(Sender: TObject);
begin
  update_grid_view_all(dxdbgrid1);
end;

procedure Tfrm_op_seai_apply.N12Click(Sender: TObject);
begin
  update_grid(dxdbgrid1,102);
end;

procedure Tfrm_op_seai_apply.N16Click(Sender: TObject);
begin
  grid_save_xls(dxdbgrid1);
end;

procedure Tfrm_op_seai_apply.bsSkinButton8Click(Sender: TObject);
VAR
  str:widestring;
begin
  str:='where '+open_data('0002','录入人','操作员','客服员','报关操作','报检操作');
  if Edit1.text<>''then
    str:=str+' and 报关单号 like '+''''+'%'+Edit1.text+'%'+'''';
  if Edit2.text<>''then
    str:=str+' and 报检单号 like '+''''+'%'+Edit2.text+'%'+'''';
  if Edit3.text<>''then
    str:=str+' and 主提单号 like '+''''+'%'+Edit3.text+'%'+'''';
  if Edit4.text<>''then
    str:=str+' and 经营单位 like '+''''+'%'+Edit4.text+'%'+'''';
  if Edit5.text<>''then
    str:=str+' and 发票号 like '+''''+'%'+Edit5.text+'%'+'''';
  if Edit6.text<>''then
    str:=str+' and 手册号 like '+''''+'%'+Edit6.text+'%'+'''';
  if RxDBLookupCombo4.DisplayValue<>''then
    str:=str+' and 委托单位='+''''+RxDBLookupCombo4.DisplayValues[1]+'''';
  if RxDBLookupCombo5.DisplayValue<>''then
    str:=str+' and 收货人='+''''+RxDBLookupCombo5.DisplayValues[1]+'''';
  if wwDBDateTimePicker9.text<>''then
    str:=str+' and 报关日期>='+''''+wwDBDateTimePicker9.text+'''';
  if wwDBDateTimePicker12.text<>''then
    str:=str+' and 报关日期<='+''''+wwDBDateTimePicker12.text+'''';
  if wwDBDateTimePicker11.text<>''then
    str:=str+' and 报检日期>='+''''+wwDBDateTimePicker11.text+'''';
  if wwDBDateTimePicker13.text<>''then
    str:=str+' and 报检日期<='+''''+wwDBDateTimePicker13.text+'''';
  
  t_op_seai.close;
  t_op_seai.sql.clear;
  t_op_seai.sql.add('select * from t_op_seai '+str+' order by 业务编号');
  t_op_seai.open;
end;

procedure Tfrm_op_seai_apply.bsSkinButton12Click(Sender: TObject);
begin
  Edit1.text:='';
  Edit2.text:='';
  Edit3.text:='';
  Edit4.text:='';
  Edit5.text:='';
  Edit6.text:='';
  RxDBLookupCombo4.ClearValue;
  RxDBLookupCombo5.ClearValue;
  wwDBDateTimePicker9.text:='';
  wwDBDateTimePicker12.text:='';
  wwDBDateTimePicker11.text:='';
  wwDBDateTimePicker13.text:='';
end;

procedure Tfrm_op_seai_apply.DBEdit1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit2);
end;

procedure Tfrm_op_seai_apply.DBEdit2KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit3);
end;

procedure Tfrm_op_seai_apply.DBEdit3KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit4);
end;

procedure Tfrm_op_seai_apply.DBEdit4KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit18);
end;

procedure Tfrm_op_seai_apply.DBEdit18KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo1);
end;

procedure Tfrm_op_seai_apply.DBEdit9KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit10);
end;

procedure Tfrm_op_seai_apply.DBEdit5KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo20);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo31);
end;

procedure Tfrm_op_seai_apply.DBEdit8KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit9);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker2KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwDBLookupCombo3);
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo3KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo2);
//  key_wwDBLookupCombo(Key,wwDBLookupCombo52);
end;

procedure Tfrm_op_seai_apply.DBEdit81KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwDBLookupCombo61);
end;

procedure Tfrm_op_seai_apply.DBEdit6KeyPress(Sender: TObject;
  var Key: Char);
var
  aQuery:TAdoQuery;
begin
  if (key=#13) and (t_op_seai.State in [dsedit,dsinsert]) and (t_op_seai.FieldByName('经营单位').AsString='') then begin
    aQuery:=CreateAdoQuery;
    try
      with aQuery do begin
        Close;SQL.Clear;
        SQL.Add('select 客户全称,客户简称 from t_crm_client where 海关编码='''+DBEdit6.Text+'''');
        Open;
        if not IsEmpty then begin
          if fieldbyname('客户全称').AsString<>'' then
            t_op_seai.FieldByName('经营单位').AsString:=fieldbyname('客户全称').AsString
          else
            t_op_seai.FieldByName('经营单位').AsString:=fieldbyname('客户简称').AsString;
        end;
      end;
    finally
      FreeAndNil(aQuery);
    end;
  end;
  key_RxDBLookupCombo(Key,RxDBLookupCombo7);
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo49KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit63);
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo52KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit11);
end;

procedure Tfrm_op_seai_apply.DBEdit11KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit5);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo20KeyPress(Sender: TObject;
  var Key: Char);
begin
//  key_RxDBLookupCombo(Key,RxDBLookupCombo6);
  key_wwDBLookupCombo(Key,wwDBLookupCombo1);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo7KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit12);
end;

procedure Tfrm_op_seai_apply.DBEdit12KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit13);
end;

procedure Tfrm_op_seai_apply.DBEdit13KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit14);
end;

procedure Tfrm_op_seai_apply.DBEdit14KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit15);
end;

procedure Tfrm_op_seai_apply.DBEdit15KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit16);
end;

procedure Tfrm_op_seai_apply.DBEdit16KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit17);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit19);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker3KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit81);
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo61KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit20);
end;

procedure Tfrm_op_seai_apply.DBEdit20KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit21);
end;

procedure Tfrm_op_seai_apply.DBEdit21KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit22);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker8KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit23);
end;

procedure Tfrm_op_seai_apply.DBEdit23KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit7);
end;

procedure Tfrm_op_seai_apply.DBEdit63KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker2);
end;

procedure Tfrm_op_seai_apply.DBEdit17KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker1);
end;

procedure Tfrm_op_seai_apply.DBEdit19KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker3);
end;

procedure Tfrm_op_seai_apply.DBEdit22KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker4);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker4KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker5);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker5KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker6);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker6KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker7);
end;

procedure Tfrm_op_seai_apply.wwDBDateTimePicker7KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBDateTimePicker(Key,wwDBDateTimePicker8);
end;

procedure Tfrm_op_seai_apply.DBEdit7KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo39);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo1Enter(Sender: TObject);
begin
  RxLookupComboEnter(RxDBLookupCombo1);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo1Exit(Sender: TObject);
begin
  RxLookupComboExit(RxDBLookupCombo1);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo2Exit(Sender: TObject);
begin
  RxLookupComboExit(RxDBLookupCombo2);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo2Enter(Sender: TObject);
begin
  RxLookupComboEnter(RxDBLookupCombo2);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo7Enter(Sender: TObject);
begin
  RxLookupComboEnter(RxDBLookupCombo7);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo7Exit(Sender: TObject);
begin
  RxLookupComboExit(RxDBLookupCombo7);
end;

procedure Tfrm_op_seai_apply.Button1Click(Sender: TObject);
begin
  if t_op_seai.isempty then
    exit;
  try
    frm_op_add_code:=tfrm_op_add_code.Create (self);
    frm_op_add_code_num:=3;
    frm_op_add_code.caption:='实验内容选择';
    frm_op_add_code.ShowModal;
  finally
    frm_op_add_code.Free;
    frm_op_add_code:=nil;
  end;
end;

procedure Tfrm_op_seai_apply.Button2Click(Sender: TObject);
begin
  if t_op_seai.isempty then
    exit;
  try
    frm_op_add_code:=tfrm_op_add_code.Create (self);
    frm_op_add_code_num:=4;
    frm_op_add_code.caption:='单证信息选择';
    frm_op_add_code.ShowModal;
  finally
    frm_op_add_code.Free;
    frm_op_add_code:=nil;
  end;
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit6);
end;

procedure Tfrm_op_seai_apply.bsSkinButton14Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton14.ClientToScreen(Point(0,bsSkinButton14.Height));
  PopupMenu1.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_op_seai_apply.N1Click(Sender: TObject);
begin
 if t_op_seai1.DataSet.IsEmpty then
    exit;
  if not do_data('0001',t_op_seai1.DataSet.FieldByName('录入人').asstring
                       ,t_op_seai1.DataSet.FieldByName('操作员').asstring
                       ,t_op_seai1.DataSet.FieldByName('揽货人').asstring
                       ,t_op_seai1.DataSet.FieldByName('客服员').asstring
                       ,t_op_seai1.DataSet.FieldByName('报关操作').asstring
                       ,t_op_seai1.DataSet.FieldByName('报检操作').asstring) then
  begin
    showmessage('对不起你无权修改此数据！');
    abort;
  end;

  if t_op_seai1.DataSet.FieldByName('业务状态').asstring='业务封帐' then
  begin
    showmessage('此票业务状态已经为业务封帐状态，不能修改！');
    abort;
  end;

  if t_op_seai1.DataSet=nil then
    exit;
  if (t_op_seai1.DataSet.State=dsinsert)or(t_op_seai1.DataSet.State=dsedit) then
    t_op_seai1.DataSet.post;
  try
    frm_op_date_change:=tfrm_op_date_change.Create (self);
     frm_op_date_change.DataSource1.Enabled:=false;
    frm_op_date_change.DataSource1.DataSet:=t_op_seai1.DataSet;
     frm_op_date_change.DataSource1.Enabled:=true;
    frm_op_date_change.ShowModal;
  finally
    frm_op_date_change.Free;
    frm_op_date_change:=nil;
  end;
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo31KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwdblookupcombo10);
end;

procedure Tfrm_op_seai_apply.DBEdit10KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBLookupCombo(Key,wwDBLookupCombo49);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo2KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_dbedit(Key,DBEdit11);
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo1Change(Sender: TObject);
var
  aQuery:TAdoQuery;
begin
  if (t_op_seai.State in [dsedit,dsinsert]) then begin
    aQuery:=CreateAdoQuery;
    try
      with aQuery do begin
        Close;SQL.Clear;
        SQL.Add('select 海关编码 from t_crm_client where 客户全称 like ''%'+wwDBLookupCombo1.Text+'%'' or 客户简称 like ''%'+wwDBLookupCombo1.Text+'%''');
        Open;
        if not IsEmpty then begin
            if t_op_seai.FieldByName('单位代码').AsString='' then
            t_op_seai.FieldByName('单位代码').AsString:=fieldbyname('海关编码').AsString
        end;
      end;
    finally
      FreeAndNil(aQuery);
    end;
  end;

end;

procedure Tfrm_op_seai_apply.bsSkinSpeedButton1Click(Sender: TObject);
begin
  if (t_op_seai1.DataSet.FieldByName('委托编号').IsNull) or (t_op_seai1.DataSet['委托编号']='') then begin
    t_op_seai1.DataSet.edit;
    if Trim(frm_data_share.t_sys_noset.fieldbyname('日期规则').Asstring)='会计期间' then
      t_op_seai1.DataSet['委托编号']:=getwtno(2,subComp,department,employee,t_op_seai1.DataSet['会计期间'])
    else
      t_op_seai1.DataSet['委托编号']:=getwtno(2,subComp,department,employee,t_op_seai1.DataSet['进口日期']);
  end;

end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo6Enter(Sender: TObject);
begin
//RxLookupComboEnter(RxDBLookupCombo6);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo6Exit(Sender: TObject);
begin
//RxLookupComboExit(RxDBLookupCombo6);
end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo6KeyPress(Sender: TObject;
  var Key: Char);
begin
 key_dbedit(Key,DBEdit6);
end;

procedure Tfrm_op_seai_apply.dxDBGrid1Column2CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color('海运进口',ANode.Strings[dxDBGrid1Column2.Index]);
  AFont.Color:=clblack;

end;

procedure Tfrm_op_seai_apply.dxDBGrid1Column3CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color_fee(ANode.strings[dxDBGrid1Column3.Index]);
  AFont.Color:=clblack;

end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo8Change(Sender: TObject);
begin
  if t_op_seai1.DataSet=nil then
    exit;
    if frm_data_share.t_crm_client_all.Locate('客户简称',RxDBLookupCombo8.DisplayValues[1],[])then
    begin
      if t_op_seai1.DataSet.State in [dsinsert,dsedit] then
         t_op_seai1.DataSet['经营单位']:=frm_data_share.t_crm_client_all.fieldbyname('客户全称').asstring
      else begin
        t_op_seai1.DataSet.edit;
         t_op_seai1.DataSet['经营单位']:=frm_data_share.t_crm_client_all.fieldbyname('客户全称').asstring
      end;
    end;

end;

procedure Tfrm_op_seai_apply.RxDBLookupCombo1Change(Sender: TObject);
begin
  if t_op_seai1.DataSet=nil then
    exit;
  if t_op_seai1.DataSet.State in [dsinsert,dsedit] then
  begin
    if frm_data_share.t_crm_client_weituo.Locate('客户简称',RxDBLookupCombo1.DisplayValues[1],[])then
    begin
      t_op_seai1.DataSet['经营单位']:=frm_data_share.t_crm_client_weituo.fieldbyname('客户全称').asstring;
    end;
     if frm_data_share.t_crm_client_weituo.fieldbyname('揽货人').asstring<>''then
    begin
      t_op_seai1.DataSet['揽货人']:=frm_data_share.t_crm_client_weituo.fieldbyname('揽货人').asstring;

      if frm_data_share.t_sys_employee.Locate('姓名',t_op_seai1.DataSet['揽货人'],[])then
      begin
        t_op_seai1.DataSet['销售部门']:=frm_data_share.t_sys_employee.fieldbyname('部门名称').asstring
      end;

    end;
 end;

end;

procedure Tfrm_op_seai_apply.Notebook1PageChanged(Sender: TObject);
begin
  setconcolor;
end;

procedure Tfrm_op_seai_apply.DBEdit26Click(Sender: TObject);
begin
  try
    frm_op_ctn:=tfrm_op_ctn.Create (self);
    frm_op_ctn.t_op_ctn.DataSource:=t_op_seai1;
    frm_op_ctn_type:=true;
    op_ctn_limited:='0002';
    frm_op_ctn.ShowModal;
  finally
    frm_op_ctn.Free;
  end;
end;

procedure Tfrm_op_seai_apply.wwDBLookupCombo10KeyPress(Sender: TObject;
  var Key: Char);
begin
 key_dbedit(Key,DBEdit8);
end;

end.