{$INCLUDE t_main.inc}
unit u_ch_balance_pay;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, dxExEdtr, DB, ADODB, u_ch_add_do, u_ch_delete_do, wwdbedit,
  Wwdotdot, Wwdbcomb, StdCtrls, DBCtrls, bsSkinCtrls, bsdbctrls, RxLookup,
  Mask, dxDBTLCl, dxGrClms, dxDBGrid, dxTL, dxDBCtrl, dxCntner, Menus,
  XPMenu, ComCtrls, bsSkinTabs, ExtCtrls, wwdbdatetimepicker, sncCurrency,
  sncDBCurrency, ToolEdit, CurrEdit, RXDBCtrl, DBCtrlsEh, AAFont, AACtrls,
  RxMemDS, bsSkinGrids, bsDBGrids, cxStyles, cxCustomData, cxGraphics,
  cxFilter, cxData, cxDataStorage, cxEdit, cxDBData, cxGridCustomTableView,
  cxGridTableView, cxGridDBTableView, cxGridLevel, cxClasses, cxControls,
  cxGridCustomView, cxGrid, cxCurrencyEdit, cxContainer, cxTextEdit,
  cxMaskEdit, cxDropDownEdit, cxCalc, cxDBEdit;

type
  Tfrm_ch_balance_pay = class(TForm)
    t_ch_balance: TADOQuery;
    t_ch_balance1: TDataSource;
    t_ch_fee_do: TADOQuery;
    XPMenu1: TXPMenu;
    PopupMenu2: TPopupMenu;
    N10: TMenuItem;
    N11: TMenuItem;
    N14: TMenuItem;
    N13: TMenuItem;
    N12: TMenuItem;
    N15: TMenuItem;
    N16: TMenuItem;
    bsSkinPageControl1: TbsSkinPageControl;
    bsSkinTabSheet1: TbsSkinTabSheet;
    bsSkinNotebook1: TbsSkinNotebook;
    dxDBGrid1: TdxDBGrid;
    dxDBGrid1Column1: TdxDBGridMaskColumn;
    dxDBGrid1Column2: TdxDBGridMaskColumn;
    dxDBGrid1Column15: TdxDBGridColumn;
    dxDBGrid1Column5: TdxDBGridMaskColumn;
    dxDBGrid1Column3: TdxDBGridMaskColumn;
    dxDBGrid1Column4: TdxDBGridMaskColumn;
    dxDBGrid1Column6: TdxDBGridColumn;
    dxDBGrid1Column7: TdxDBGridColumn;
    dxDBGrid1Column8: TdxDBGridColumn;
    dxDBGrid1Column9: TdxDBGridMaskColumn;
    dxDBGrid1Column10: TdxDBGridMaskColumn;
    dxDBGrid1Column11: TdxDBGridMaskColumn;
    dxDBGrid1Column12: TdxDBGridDateColumn;
    dxDBGrid1Column13: TdxDBGridMaskColumn;
    dxDBGrid1Column14: TdxDBGridDateColumn;
    bsSkinPanel1: TbsSkinPanel;
    bsSkinPanel3: TbsSkinPanel;
    Label25: TLabel;
    Label17: TLabel;
    Label12: TLabel;
    Label1: TLabel;
    Label2: TLabel;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    Label8: TLabel;
    Label9: TLabel;
    Label10: TLabel;
    DBEdit14: TDBEdit;
    DBEdit1: TDBEdit;
    RxDBLookupCombo1: TRxDBLookupCombo;
    bsSkinDBCheckRadioBox1: TbsSkinDBCheckRadioBox;
    DBEdit4: TDBEdit;
    DBEdit5: TDBEdit;
    DBEdit6: TDBEdit;
    DBEdit8: TDBEdit;
    DBEdit9: TDBEdit;
    DBEdit10: TDBEdit;
    DBMemo1: TDBMemo;
    RxDBLookupCombo2: TRxDBLookupCombo;
    wwDBComboBox1: TwwDBComboBox;
    fra_ch_delete_do1: Tfra_ch_delete_do;
    fra_ch_add_do1: Tfra_ch_add_do;
    bsSkinTabSheet2: TbsSkinTabSheet;
    bsSkinPanel2: TbsSkinPanel;
    bsSkinButton1: TbsSkinButton;
    bsSkinButton2: TbsSkinButton;
    bsSkinButton4: TbsSkinButton;
    bsSkinButton3: TbsSkinButton;
    bsSkinButton5: TbsSkinButton;
    bsSkinButton8: TbsSkinButton;
    bsSkinButton9: TbsSkinButton;
    bsSkinButton10: TbsSkinButton;
    bsSkinButton11: TbsSkinButton;
    bsSkinButton6: TbsSkinButton;
    t_ch_check1: TDataSource;
    t_ch_check: TADOQuery;
    v_fee_do_seae: TADOQuery;
    v_fee_do_seae1: TDataSource;
    v_fee_do_seai: TADOQuery;
    v_fee_do_seai1: TDataSource;
    v_fee_do_aire: TADOQuery;
    v_fee_do_airi: TADOQuery;
    v_fee_do_airi1: TDataSource;
    v_fee_do_aire1: TDataSource;
    Panel1: TPanel;
    dxDBGrid2: TdxDBGrid;
    dxDBGridMaskColumn1: TdxDBGridMaskColumn;
    dxDBGridMaskColumn2: TdxDBGridMaskColumn;
    dxDBGridMaskColumn3: TdxDBGridMaskColumn;
    dxDBGridMaskColumn5: TdxDBGridMaskColumn;
    dxDBGridColumn1: TdxDBGridColumn;
    dxDBGridColumn2: TdxDBGridColumn;
    dxDBGridColumn3: TdxDBGridColumn;
    dxDBGridMaskColumn7: TdxDBGridMaskColumn;
    dxDBGridDateColumn1: TdxDBGridDateColumn;
    dxDBGridMaskColumn8: TdxDBGridMaskColumn;
    dxDBGridDateColumn2: TdxDBGridDateColumn;
    bsSkinPanel4: TbsSkinPanel;
    Label11: TLabel;
    Label13: TLabel;
    Label14: TLabel;
    Label15: TLabel;
    Label16: TLabel;
    Label18: TLabel;
    Label20: TLabel;
    Label22: TLabel;
    Label23: TLabel;
    Label24: TLabel;
    Label26: TLabel;
    DBEdit2: TDBEdit;
    DBEdit3: TDBEdit;
    DBEdit7: TDBEdit;
    DBEdit11: TDBEdit;
    DBEdit13: TDBEdit;
    DBMemo2: TDBMemo;
    DBEdit16: TDBEdit;
    DBEdit17: TDBEdit;
    DBEdit18: TDBEdit;
    DBEdit12: TDBEdit;
    bsSkinPanel5: TbsSkinPanel;
    bsSkinButton21: TbsSkinButton;
    bsSkinButton24: TbsSkinButton;
    bsSkinButton25: TbsSkinButton;
    DBEdit15: TDBEdit;
    bsSkinPanel6: TbsSkinPanel;
    bsSkinGroupBox1: TbsSkinGroupBox;
    Label38: TLabel;
    DBEdit27: TDBEdit;
    Label39: TLabel;
    DBEdit28: TDBEdit;
    Label40: TLabel;
    DBEdit29: TDBEdit;
    Label41: TLabel;
    DBEdit30: TDBEdit;
    DBEdit31: TDBEdit;
    Label42: TLabel;
    DBEdit32: TDBEdit;
    Label43: TLabel;
    Label44: TLabel;
    DBEdit33: TDBEdit;
    Label45: TLabel;
    DBEdit34: TDBEdit;
    DBEdit35: TDBEdit;
    Label46: TLabel;
    DBEdit36: TDBEdit;
    Label47: TLabel;
    Label48: TLabel;
    DBMemo4: TDBMemo;
    bsSkinGroupBox2: TbsSkinGroupBox;
    Label19: TLabel;
    DBEdit19: TDBEdit;
    Label21: TLabel;
    DBEdit20: TDBEdit;
    Label27: TLabel;
    Label28: TLabel;
    Label29: TLabel;
    DBEdit22: TDBEdit;
    Label31: TLabel;
    DBEdit21: TDBEdit;
    Label30: TLabel;
    Label32: TLabel;
    DBEdit23: TDBEdit;
    Label33: TLabel;
    Label34: TLabel;
    DBEdit26: TDBEdit;
    Label36: TLabel;
    DBEdit25: TDBEdit;
    Label35: TLabel;
    Label37: TLabel;
    DBMemo3: TDBMemo;
    DBEdit37: TDBEdit;
    Label49: TLabel;
    DBEdit39: TDBEdit;
    t_ch_check_detail: TADOQuery;
    t_ch_check_detail1: TDataSource;
    DBEdit40: TDBEdit;
    DBEdit41: TDBEdit;
    bsSkinPanel7: TbsSkinPanel;
    DBEdit42: TDBEdit;
    p_update: TADOStoredProc;
    t_ch_fee_do_check: TADOQuery;
    bsSkinButton7: TbsSkinButton;
    dxDBGrid2Column12: TdxDBGridColumn;
    Label50: TLabel;
    DBEdit43: TDBEdit;
    Label51: TLabel;
    DBEdit44: TDBEdit;
    bsSkinButton12: TbsSkinButton;
    Label52: TLabel;
    DBEdit45: TDBEdit;
    Label53: TLabel;
    DBEdit46: TDBEdit;
    PopupMenu3: TPopupMenu;
    N17: TMenuItem;
    N18: TMenuItem;
    N34: TMenuItem;
    N35: TMenuItem;
    N36: TMenuItem;
    N1: TMenuItem;
    N6: TMenuItem;
    N5: TMenuItem;
    N4: TMenuItem;
    Label54: TLabel;
    DBEdit47: TDBEdit;
    Label55: TLabel;
    DBEdit48: TDBEdit;
    bsSkinButton13: TbsSkinButton;
    dxDBGrid1Column16: TdxDBGridColumn;
    v_fee_do_seae_sum: TADOQuery;
    v_fee_do_seae_sum1: TDataSource;
    v_fee_do_seai_sum: TADOQuery;
    v_fee_do_seai_sum1: TDataSource;
    v_fee_do_aire_sum: TADOQuery;
    v_fee_do_aire_sum1: TDataSource;
    v_fee_do_airi_sum: TADOQuery;
    v_fee_do_airi_sum1: TDataSource;
    bsSkinPageControl2: TbsSkinPageControl;
    bsSkinTabSheet3: TbsSkinTabSheet;
    dxDBGrid6: TdxDBGrid;
    dxDBGridMaskColumn55: TdxDBGridMaskColumn;
    dxDBGridMaskColumn56: TdxDBGridMaskColumn;
    dxDBGridMaskColumn57: TdxDBGridMaskColumn;
    dxDBGridMaskColumn58: TdxDBGridMaskColumn;
    dxDBGridMaskColumn59: TdxDBGridMaskColumn;
    dxDBGridColumn17: TdxDBGridColumn;
    dxDBGridColumn18: TdxDBGridColumn;
    dxDBGridMaskColumn60: TdxDBGridMaskColumn;
    dxDBGrid6Column22: TdxDBGridColumn;
    dxDBGridDateColumn9: TdxDBGridDateColumn;
    dxDBGridDateColumn10: TdxDBGridDateColumn;
    dxDBGridMaskColumn4: TdxDBGridMaskColumn;
    dxDBGridMaskColumn6: TdxDBGridMaskColumn;
    dxDBGridMaskColumn9: TdxDBGridMaskColumn;
    dxDBGridMaskColumn10: TdxDBGridMaskColumn;
    dxDBGridMaskColumn11: TdxDBGridMaskColumn;
    dxDBGridColumn19: TdxDBGridColumn;
    dxDBGridColumn4: TdxDBGridColumn;
    dxDBGridMaskColumn12: TdxDBGridMaskColumn;
    dxDBGridMaskColumn13: TdxDBGridMaskColumn;
    dxDBGridMaskColumn14: TdxDBGridMaskColumn;
    dxDBGridMaskColumn15: TdxDBGridMaskColumn;
    dxDBGrid11: TdxDBGrid;
    dxDBGrid5Column4: TdxDBGridColumn;
    dxDBGrid5Column1: TdxDBGridMaskColumn;
    dxDBGrid5Column2: TdxDBGridColumn;
    dxDBGrid5Column5: TdxDBGridColumn;
    dxDBGrid5Column6: TdxDBGridColumn;
    dxDBGrid5Column3: TdxDBGridColumn;
    bsSkinTabSheet4: TbsSkinTabSheet;
    dxDBGrid3: TdxDBGrid;
    dxDBGridMaskColumn16: TdxDBGridMaskColumn;
    dxDBGridMaskColumn17: TdxDBGridMaskColumn;
    dxDBGridMaskColumn18: TdxDBGridMaskColumn;
    dxDBGridMaskColumn19: TdxDBGridMaskColumn;
    dxDBGridMaskColumn20: TdxDBGridMaskColumn;
    dxDBGridColumn5: TdxDBGridColumn;
    dxDBGridColumn6: TdxDBGridColumn;
    dxDBGridMaskColumn21: TdxDBGridMaskColumn;
    dxDBGridColumn7: TdxDBGridColumn;
    dxDBGridDateColumn3: TdxDBGridDateColumn;
    dxDBGridDateColumn4: TdxDBGridDateColumn;
    dxDBGridMaskColumn22: TdxDBGridMaskColumn;
    dxDBGridMaskColumn23: TdxDBGridMaskColumn;
    dxDBGridMaskColumn24: TdxDBGridMaskColumn;
    dxDBGridMaskColumn25: TdxDBGridMaskColumn;
    dxDBGridMaskColumn26: TdxDBGridMaskColumn;
    dxDBGridColumn8: TdxDBGridColumn;
    dxDBGridColumn9: TdxDBGridColumn;
    dxDBGridMaskColumn27: TdxDBGridMaskColumn;
    dxDBGridMaskColumn28: TdxDBGridMaskColumn;
    dxDBGridMaskColumn29: TdxDBGridMaskColumn;
    dxDBGridMaskColumn30: TdxDBGridMaskColumn;
    dxDBGrid12: TdxDBGrid;
    dxDBGrid6Column4: TdxDBGridColumn;
    dxDBGridMaskColumn31: TdxDBGridMaskColumn;
    dxDBGridColumn36: TdxDBGridColumn;
    dxDBGrid6Column5: TdxDBGridColumn;
    dxDBGrid6Column6: TdxDBGridColumn;
    dxDBGridColumn43: TdxDBGridColumn;
    bsSkinTabSheet5: TbsSkinTabSheet;
    dxDBGrid4: TdxDBGrid;
    dxDBGridMaskColumn32: TdxDBGridMaskColumn;
    dxDBGridMaskColumn33: TdxDBGridMaskColumn;
    dxDBGridMaskColumn34: TdxDBGridMaskColumn;
    dxDBGridMaskColumn35: TdxDBGridMaskColumn;
    dxDBGridMaskColumn36: TdxDBGridMaskColumn;
    dxDBGridColumn10: TdxDBGridColumn;
    dxDBGridColumn11: TdxDBGridColumn;
    dxDBGridMaskColumn37: TdxDBGridMaskColumn;
    dxDBGrid8Column19: TdxDBGridColumn;
    dxDBGridDateColumn5: TdxDBGridDateColumn;
    dxDBGridDateColumn6: TdxDBGridDateColumn;
    dxDBGridMaskColumn38: TdxDBGridMaskColumn;
    dxDBGridMaskColumn39: TdxDBGridMaskColumn;
    dxDBGridMaskColumn40: TdxDBGridMaskColumn;
    dxDBGridColumn12: TdxDBGridColumn;
    dxDBGridColumn13: TdxDBGridColumn;
    dxDBGridMaskColumn41: TdxDBGridMaskColumn;
    dxDBGridMaskColumn42: TdxDBGridMaskColumn;
    dxDBGridMaskColumn43: TdxDBGridMaskColumn;
    dxDBGrid13: TdxDBGrid;
    dxDBGrid7Column4: TdxDBGridColumn;
    dxDBGridMaskColumn44: TdxDBGridMaskColumn;
    dxDBGridColumn37: TdxDBGridColumn;
    dxDBGrid7Column5: TdxDBGridColumn;
    dxDBGrid7Column6: TdxDBGridColumn;
    dxDBGridColumn44: TdxDBGridColumn;
    bsSkinTabSheet6: TbsSkinTabSheet;
    dxDBGrid5: TdxDBGrid;
    dxDBGridMaskColumn45: TdxDBGridMaskColumn;
    dxDBGridMaskColumn46: TdxDBGridMaskColumn;
    dxDBGridMaskColumn47: TdxDBGridMaskColumn;
    dxDBGridMaskColumn48: TdxDBGridMaskColumn;
    dxDBGridMaskColumn49: TdxDBGridMaskColumn;
    dxDBGridColumn14: TdxDBGridColumn;
    dxDBGridColumn15: TdxDBGridColumn;
    dxDBGridMaskColumn50: TdxDBGridMaskColumn;
    dxDBGridColumn16: TdxDBGridColumn;
    dxDBGridDateColumn7: TdxDBGridDateColumn;
    dxDBGridDateColumn8: TdxDBGridDateColumn;
    dxDBGridMaskColumn51: TdxDBGridMaskColumn;
    dxDBGridMaskColumn52: TdxDBGridMaskColumn;
    dxDBGridMaskColumn53: TdxDBGridMaskColumn;
    dxDBGridColumn38: TdxDBGridColumn;
    dxDBGridColumn45: TdxDBGridColumn;
    dxDBGridMaskColumn54: TdxDBGridMaskColumn;
    dxDBGridMaskColumn115: TdxDBGridMaskColumn;
    dxDBGridMaskColumn116: TdxDBGridMaskColumn;
    dxDBGrid14: TdxDBGrid;
    dxDBGrid8Column4: TdxDBGridColumn;
    dxDBGridMaskColumn117: TdxDBGridMaskColumn;
    dxDBGridColumn46: TdxDBGridColumn;
    dxDBGrid8Column5: TdxDBGridColumn;
    dxDBGrid8Column6: TdxDBGridColumn;
    dxDBGridColumn47: TdxDBGridColumn;
    bsSkinPageControl3: TbsSkinPageControl;
    bsSkinTabSheet7: TbsSkinTabSheet;
    dxDBGrid7: TdxDBGrid;
    dxDBGrid2Column22: TdxDBGridColumn;
    dxDBGridMaskColumn61: TdxDBGridMaskColumn;
    dxDBGridMaskColumn62: TdxDBGridMaskColumn;
    dxDBGridMaskColumn63: TdxDBGridMaskColumn;
    dxDBGridMaskColumn64: TdxDBGridMaskColumn;
    dxDBGridMaskColumn65: TdxDBGridMaskColumn;
    dxDBGridColumn20: TdxDBGridColumn;
    dxDBGridColumn21: TdxDBGridColumn;
    dxDBGridMaskColumn66: TdxDBGridMaskColumn;
    dxDBGrid2Column23: TdxDBGridColumn;
    dxDBGridDateColumn11: TdxDBGridDateColumn;
    dxDBGridDateColumn12: TdxDBGridDateColumn;
    dxDBGridMaskColumn67: TdxDBGridMaskColumn;
    dxDBGridMaskColumn68: TdxDBGridMaskColumn;
    dxDBGridMaskColumn69: TdxDBGridMaskColumn;
    dxDBGridMaskColumn70: TdxDBGridMaskColumn;
    dxDBGridMaskColumn71: TdxDBGridMaskColumn;
    dxDBGridColumn22: TdxDBGridColumn;
    dxDBGridColumn23: TdxDBGridColumn;
    dxDBGridMaskColumn72: TdxDBGridMaskColumn;
    dxDBGridMaskColumn73: TdxDBGridMaskColumn;
    dxDBGridMaskColumn74: TdxDBGridMaskColumn;
    dxDBGridMaskColumn75: TdxDBGridMaskColumn;
    dxDBGrid15: TdxDBGrid;
    dxDBGridColumn39: TdxDBGridColumn;
    dxDBGridMaskColumn76: TdxDBGridMaskColumn;
    dxDBGridColumn24: TdxDBGridColumn;
    dxDBGridColumn25: TdxDBGridColumn;
    dxDBGridColumn48: TdxDBGridColumn;
    dxDBGridColumn49: TdxDBGridColumn;
    bsSkinTabSheet8: TbsSkinTabSheet;
    dxDBGrid8: TdxDBGrid;
    dxDBGrid3Column22: TdxDBGridColumn;
    dxDBGridMaskColumn77: TdxDBGridMaskColumn;
    dxDBGridMaskColumn78: TdxDBGridMaskColumn;
    dxDBGridMaskColumn79: TdxDBGridMaskColumn;
    dxDBGridMaskColumn80: TdxDBGridMaskColumn;
    dxDBGridMaskColumn81: TdxDBGridMaskColumn;
    dxDBGridColumn26: TdxDBGridColumn;
    dxDBGridColumn27: TdxDBGridColumn;
    dxDBGridMaskColumn82: TdxDBGridMaskColumn;
    dxDBGrid3Column23: TdxDBGridColumn;
    dxDBGridDateColumn13: TdxDBGridDateColumn;
    dxDBGridDateColumn14: TdxDBGridDateColumn;
    dxDBGridMaskColumn83: TdxDBGridMaskColumn;
    dxDBGridMaskColumn84: TdxDBGridMaskColumn;
    dxDBGridMaskColumn85: TdxDBGridMaskColumn;
    dxDBGridMaskColumn86: TdxDBGridMaskColumn;
    dxDBGridMaskColumn87: TdxDBGridMaskColumn;
    dxDBGridColumn28: TdxDBGridColumn;
    dxDBGridColumn29: TdxDBGridColumn;
    dxDBGridMaskColumn88: TdxDBGridMaskColumn;
    dxDBGridMaskColumn89: TdxDBGridMaskColumn;
    dxDBGridMaskColumn90: TdxDBGridMaskColumn;
    dxDBGridMaskColumn91: TdxDBGridMaskColumn;
    dxDBGrid16: TdxDBGrid;
    dxDBGridColumn40: TdxDBGridColumn;
    dxDBGridMaskColumn92: TdxDBGridMaskColumn;
    dxDBGridColumn50: TdxDBGridColumn;
    dxDBGridColumn51: TdxDBGridColumn;
    dxDBGridColumn52: TdxDBGridColumn;
    dxDBGridColumn53: TdxDBGridColumn;
    bsSkinTabSheet9: TbsSkinTabSheet;
    dxDBGrid9: TdxDBGrid;
    dxDBGrid4Column19: TdxDBGridColumn;
    dxDBGridMaskColumn93: TdxDBGridMaskColumn;
    dxDBGridMaskColumn94: TdxDBGridMaskColumn;
    dxDBGridMaskColumn95: TdxDBGridMaskColumn;
    dxDBGridMaskColumn96: TdxDBGridMaskColumn;
    dxDBGridMaskColumn97: TdxDBGridMaskColumn;
    dxDBGridColumn30: TdxDBGridColumn;
    dxDBGridColumn31: TdxDBGridColumn;
    dxDBGridMaskColumn98: TdxDBGridMaskColumn;
    dxDBGrid4Column20: TdxDBGridColumn;
    dxDBGridDateColumn15: TdxDBGridDateColumn;
    dxDBGridDateColumn16: TdxDBGridDateColumn;
    dxDBGridMaskColumn99: TdxDBGridMaskColumn;
    dxDBGridMaskColumn100: TdxDBGridMaskColumn;
    dxDBGridMaskColumn101: TdxDBGridMaskColumn;
    dxDBGridColumn32: TdxDBGridColumn;
    dxDBGridColumn33: TdxDBGridColumn;
    dxDBGridMaskColumn102: TdxDBGridMaskColumn;
    dxDBGridMaskColumn103: TdxDBGridMaskColumn;
    dxDBGridMaskColumn104: TdxDBGridMaskColumn;
    dxDBGrid17: TdxDBGrid;
    dxDBGridColumn41: TdxDBGridColumn;
    dxDBGridMaskColumn118: TdxDBGridMaskColumn;
    dxDBGridColumn54: TdxDBGridColumn;
    dxDBGridColumn55: TdxDBGridColumn;
    dxDBGridColumn56: TdxDBGridColumn;
    dxDBGridColumn57: TdxDBGridColumn;
    bsSkinTabSheet10: TbsSkinTabSheet;
    dxDBGrid10: TdxDBGrid;
    dxDBGrid5Column19: TdxDBGridColumn;
    dxDBGridMaskColumn105: TdxDBGridMaskColumn;
    dxDBGridMaskColumn106: TdxDBGridMaskColumn;
    dxDBGridMaskColumn107: TdxDBGridMaskColumn;
    dxDBGridMaskColumn108: TdxDBGridMaskColumn;
    dxDBGridMaskColumn109: TdxDBGridMaskColumn;
    dxDBGridColumn34: TdxDBGridColumn;
    dxDBGridColumn35: TdxDBGridColumn;
    dxDBGridMaskColumn110: TdxDBGridMaskColumn;
    dxDBGrid5Column20: TdxDBGridColumn;
    dxDBGridDateColumn17: TdxDBGridDateColumn;
    dxDBGridDateColumn18: TdxDBGridDateColumn;
    dxDBGridMaskColumn111: TdxDBGridMaskColumn;
    dxDBGridMaskColumn112: TdxDBGridMaskColumn;
    dxDBGridMaskColumn113: TdxDBGridMaskColumn;
    dxDBGridColumn42: TdxDBGridColumn;
    dxDBGridColumn58: TdxDBGridColumn;
    dxDBGridMaskColumn114: TdxDBGridMaskColumn;
    dxDBGridMaskColumn119: TdxDBGridMaskColumn;
    dxDBGridMaskColumn120: TdxDBGridMaskColumn;
    dxDBGrid18: TdxDBGrid;
    dxDBGridColumn59: TdxDBGridColumn;
    dxDBGridMaskColumn121: TdxDBGridMaskColumn;
    dxDBGridColumn60: TdxDBGridColumn;
    dxDBGridColumn61: TdxDBGridColumn;
    dxDBGridColumn62: TdxDBGridColumn;
    dxDBGridColumn63: TdxDBGridColumn;
    dxDBGrid6Column23: TdxDBGridColumn;
    dxDBGrid3Column24: TdxDBGridColumn;
    dxDBGrid4Column21: TdxDBGridColumn;
    dxDBGrid5Column21: TdxDBGridColumn;
    dxDBGrid7Column24: TdxDBGridColumn;
    dxDBGrid8Column24: TdxDBGridColumn;
    dxDBGrid9Column21: TdxDBGridColumn;
    dxDBGrid10Column21: TdxDBGridColumn;
    dxDBGrid1Column17: TdxDBGridColumn;
    dxDBGrid1Column18: TdxDBGridColumn;
    dxDBGrid2Column13: TdxDBGridColumn;
    dxDBGrid2Column14: TdxDBGridColumn;
    Label69: TLabel;
    DBEdit57: TDBEdit;
    Label70: TLabel;
    DBEdit58: TDBEdit;
    Label71: TLabel;
    DBEdit59: TDBEdit;
    Label72: TLabel;
    DBEdit60: TDBEdit;
    bsSkinPanel9: TbsSkinPanel;
    Label73: TLabel;
    Label74: TLabel;
    Label75: TLabel;
    Label77: TLabel;
    Label78: TLabel;
    Label80: TLabel;
    Label81: TLabel;
    Label82: TLabel;
    Label84: TLabel;
    Label85: TLabel;
    Label86: TLabel;
    Label87: TLabel;
    DBEdit61: TDBEdit;
    DBEdit62: TDBEdit;
    DBEdit63: TDBEdit;
    DBEdit64: TDBEdit;
    DBMemo6: TDBMemo;
    DBEdit66: TDBEdit;
    DBEdit67: TDBEdit;
    DBEdit68: TDBEdit;
    DBEdit69: TDBEdit;
    DBEdit71: TDBEdit;
    DBEdit72: TDBEdit;
    DBEdit73: TDBEdit;
    DBEdit74: TDBEdit;
    Label83: TLabel;
    wwDBDateTimePicker1: TwwDBDateTimePicker;
    bsSkinPanel10: TbsSkinPanel;
    dxDBGrid1Column19: TdxDBGridColumn;
    dxDBGrid1Column20: TdxDBGridColumn;
    bsSkinButton38: TbsSkinButton;
    wwDBDateTimePicker3: TwwDBDateTimePicker;
    bstab5: TbsSkinTabSheet;
    dxDBGrid19: TdxDBGrid;
    dxDBGridColumn64: TdxDBGridColumn;
    dxDBGridMaskColumn122: TdxDBGridMaskColumn;
    dxDBGridColumn65: TdxDBGridColumn;
    dxDBGridColumn66: TdxDBGridColumn;
    dxDBGridColumn67: TdxDBGridColumn;
    dxDBGridColumn68: TdxDBGridColumn;
    dxDBGrid20: TdxDBGrid;
    dxDBGridColumn69: TdxDBGridColumn;
    dxDBGridMaskColumn123: TdxDBGridMaskColumn;
    dxDBGridMaskColumn124: TdxDBGridMaskColumn;
    dxDBGridMaskColumn125: TdxDBGridMaskColumn;
    dxDBGridMaskColumn126: TdxDBGridMaskColumn;
    dxDBGridMaskColumn127: TdxDBGridMaskColumn;
    dxDBGridColumn70: TdxDBGridColumn;
    dxDBGridColumn71: TdxDBGridColumn;
    dxDBGridMaskColumn128: TdxDBGridMaskColumn;
    dxDBGridColumn72: TdxDBGridColumn;
    dxDBGrid9Column24: TdxDBGridColumn;
    dxDBGridDateColumn19: TdxDBGridDateColumn;
    dxDBGridDateColumn20: TdxDBGridDateColumn;
    dxDBGridMaskColumn129: TdxDBGridMaskColumn;
    dxDBGridMaskColumn130: TdxDBGridMaskColumn;
    dxDBGridMaskColumn131: TdxDBGridMaskColumn;
    dxDBGridMaskColumn132: TdxDBGridMaskColumn;
    dxDBGridMaskColumn133: TdxDBGridMaskColumn;
    dxDBGridColumn73: TdxDBGridColumn;
    dxDBGridColumn74: TdxDBGridColumn;
    dxDBGridMaskColumn134: TdxDBGridMaskColumn;
    dxDBGridMaskColumn135: TdxDBGridMaskColumn;
    dxDBGridMaskColumn136: TdxDBGridMaskColumn;
    dxDBGridMaskColumn137: TdxDBGridMaskColumn;
    Label64: TLabel;
    dxDBGrid1Column22: TdxDBGridColumn;
    Label79: TLabel;
    DBEdit70: TDBEdit;
    dxDBGrid1Column23: TdxDBGridColumn;
    t_ch_zhipiao1: TDataSource;
    t_ch_zhipiao: TADOQuery;
    bskntbshtTBS3: TbsSkinTabSheet;
    bsSkinPageControl4: TbsSkinPageControl;
    bsSkinTabSheet11: TbsSkinTabSheet;
    bsSkinPanel11: TbsSkinPanel;
    bsSkinButton14: TbsSkinButton;
    bsSkinButton15: TbsSkinButton;
    bsSkinButton16: TbsSkinButton;
    bsSkinButton18: TbsSkinButton;
    bsSkinButton19: TbsSkinButton;
    bsSkinButton20: TbsSkinButton;
    bsSkinButton22: TbsSkinButton;
    bsSkinButton23: TbsSkinButton;
    dxDBGrid21: TdxDBGrid;
    dxDBGridMaskColumn138: TdxDBGridMaskColumn;
    dxDBGridMaskColumn139: TdxDBGridMaskColumn;
    dxDBGridMaskColumn140: TdxDBGridMaskColumn;
    dxDBGridMaskColumn141: TdxDBGridMaskColumn;
    dxDBGridColumn75: TdxDBGridColumn;
    dxDBGridDateColumn21: TdxDBGridDateColumn;
    dxDBGridMaskColumn142: TdxDBGridMaskColumn;
    dxDBGridMaskColumn143: TdxDBGridMaskColumn;
    dxDBGridMaskColumn144: TdxDBGridMaskColumn;
    dxDBGrid1Column25: TdxDBGridCheckColumn;
    dxDBGrid1Column26: TdxDBGridMaskColumn;
    dxDBGrid1Column27: TdxDBGridDateColumn;
    dxDBGrid1Column28: TdxDBGridMaskColumn;
    dxDBGrid1Column32: TdxDBGridCheckColumn;
    dxDBGrid1Column29: TdxDBGridCheckColumn;
    dxDBGrid1Column30: TdxDBGridMaskColumn;
    dxDBGrid1Column35: TdxDBGridMaskColumn;
    dxDBGrid1Column36: TdxDBGridDateColumn;
    dxDBGrid1Column31: TdxDBGridMaskColumn;
    dxDBGrid1Column33: TdxDBGridMaskColumn;
    dxDBGrid1Column34: TdxDBGridDateColumn;
    bsSkinTabSheet12: TbsSkinTabSheet;
    bsSkinPanel12: TbsSkinPanel;
    bsSkinButton26: TbsSkinButton;
    bsSkinButton27: TbsSkinButton;
    bsSkinButton28: TbsSkinButton;
    bsSkinButton29: TbsSkinButton;
    bsSkinButton30: TbsSkinButton;
    bsSkinButton31: TbsSkinButton;
    bsSkinButton33: TbsSkinButton;
    bsSkinButton35: TbsSkinButton;
    bsSkinButton36: TbsSkinButton;
    bsSkinPanel13: TbsSkinPanel;
    Label88: TLabel;
    Label89: TLabel;
    Label90: TLabel;
    Label91: TLabel;
    Label92: TLabel;
    DBEdit75: TDBEdit;
    DBEdit76: TDBEdit;
    DBEdit77: TDBEdit;
    DBEdit78: TDBEdit;
    RxDBLookupCombo6: TRxDBLookupCombo;
    s_invoice: TScrollBox;
    Label93: TLabel;
    Label94: TLabel;
    Label96: TLabel;
    Label97: TLabel;
    Shape1: TShape;
    AALabel1: TAALabel;
    Label98: TLabel;
    lblYEAR: TLabel;
    Label99: TLabel;
    lblMonth: TLabel;
    Label101: TLabel;
    lblDay: TLabel;
    Label102: TLabel;
    Label103: TLabel;
    Shape2: TShape;
    Label104: TLabel;
    sncCurrencyLabel1: TsncCurrencyLabel;
    Label105: TLabel;
    Label106: TLabel;
    Label107: TLabel;
    Label108: TLabel;
    DBText1: TDBText;
    DBText2: TDBText;
    DBText3: TDBText;
    DBText4: TDBText;
    Label109: TLabel;
    Label110: TLabel;
    Label111: TLabel;
    Shape3: TShape;
    Label112: TLabel;
    Label113: TLabel;
    lbl1: TLabel;
    lbl2: TLabel;
    bsSkinPanel14: TbsSkinPanel;
    Label114: TLabel;
    Label115: TLabel;
    DBEdit79: TDBEdit;
    DBEdit80: TDBEdit;
    bsSkinDBCheckRadioBox3: TbsSkinDBCheckRadioBox;
    bsSkinDBCheckRadioBox4: TbsSkinDBCheckRadioBox;
    csj: TDBDateTimeEditEh;
    rxdbj: TRxDBCalcEdit;
    snccy: TsncDBCurrencyEdit;
    czphm: TDBEdit;
    DBEdit81: TDBEdit;
    DBComboBox1: TDBComboBox;
    DBComboBox2: TDBComboBox;
    DBEdit82: TDBEdit;
    DBEdit83: TDBEdit;
    dbedt1: TDBEdit;
    dbedt2: TDBEdit;
    PopupMenu1: TPopupMenu;
    MenuItem1: TMenuItem;
    N2: TMenuItem;
    N3: TMenuItem;
    MenuItem2: TMenuItem;
    N20: TMenuItem;
    tab5: TbsSkinTabSheet;
    dxDBGrid22: TdxDBGrid;
    dxDBGridColumn76: TdxDBGridColumn;
    dxDBGridMaskColumn145: TdxDBGridMaskColumn;
    dxDBGridColumn77: TdxDBGridColumn;
    dxDBGridColumn78: TdxDBGridColumn;
    dxDBGridColumn79: TdxDBGridColumn;
    dxDBGridColumn80: TdxDBGridColumn;
    dxDBGrid23: TdxDBGrid;
    dxDBGridMaskColumn146: TdxDBGridMaskColumn;
    dxDBGridMaskColumn147: TdxDBGridMaskColumn;
    dxDBGridMaskColumn148: TdxDBGridMaskColumn;
    dxDBGridMaskColumn149: TdxDBGridMaskColumn;
    dxDBGridMaskColumn150: TdxDBGridMaskColumn;
    dxDBGridColumn81: TdxDBGridColumn;
    dxDBGridColumn82: TdxDBGridColumn;
    dxDBGridColumn83: TdxDBGridColumn;
    dxDBGridMaskColumn151: TdxDBGridMaskColumn;
    dxDBGridColumn84: TdxDBGridColumn;
    dxDBGridDateColumn22: TdxDBGridDateColumn;
    dxDBGridDateColumn23: TdxDBGridDateColumn;
    dxDBGridMaskColumn152: TdxDBGridMaskColumn;
    dxDBGridMaskColumn153: TdxDBGridMaskColumn;
    dxDBGridMaskColumn154: TdxDBGridMaskColumn;
    dxDBGridMaskColumn155: TdxDBGridMaskColumn;
    dxDBGridMaskColumn156: TdxDBGridMaskColumn;
    dxDBGridColumn85: TdxDBGridColumn;
    dxDBGridColumn86: TdxDBGridColumn;
    dxDBGridMaskColumn157: TdxDBGridMaskColumn;
    dxDBGridMaskColumn158: TdxDBGridMaskColumn;
    dxDBGridMaskColumn159: TdxDBGridMaskColumn;
    dxDBGridMaskColumn160: TdxDBGridMaskColumn;
    dxDBGrid1Column24: TdxDBGridColumn;
    dxDBGrid1Column37: TdxDBGridColumn;
    RxDBLookupCombo10: TRxDBLookupCombo;
    RxDBLookupCombo11: TRxDBLookupCombo;
    wwDBComboBox3: TwwDBComboBox;
    RxDBLookupCombo21: TRxDBLookupCombo;
    DBEdit24: TDBEdit;
    DBEdit84: TDBEdit;
    Label116: TLabel;
    RxDBLookupCombo18: TRxDBLookupCombo;
    RxDBLookupCombo3: TRxDBLookupCombo;
    RxDBLookupCombo7: TRxDBLookupCombo;
    bsSkinPanel8: TbsSkinPanel;
    Label56: TLabel;
    Label57: TLabel;
    Label58: TLabel;
    Label59: TLabel;
    Label60: TLabel;
    Label61: TLabel;
    Label62: TLabel;
    Label63: TLabel;
    Label65: TLabel;
    Label66: TLabel;
    Label67: TLabel;
    Label68: TLabel;
    Label95: TLabel;
    Label100: TLabel;
    Label76: TLabel;
    DBEdit49: TDBEdit;
    DBEdit50: TDBEdit;
    RxDBLookupCombo4: TRxDBLookupCombo;
    bsSkinDBCheckRadioBox2: TbsSkinDBCheckRadioBox;
    DBEdit51: TDBEdit;
    DBEdit52: TDBEdit;
    DBEdit53: TDBEdit;
    DBEdit54: TDBEdit;
    DBEdit55: TDBEdit;
    DBEdit56: TDBEdit;
    DBMemo5: TDBMemo;
    RxDBLookupCombo5: TRxDBLookupCombo;
    wwDBComboBox2: TwwDBComboBox;
    wwDBDateTimePicker2: TwwDBDateTimePicker;
    RxDBLookupCombo15: TRxDBLookupCombo;
    RxDBLookupCombo14: TRxDBLookupCombo;
    RxDBLookupCombo13: TRxDBLookupCombo;
    RxDBLookupCombo16: TRxDBLookupCombo;
    DBEdit65: TDBEdit;
    bsSkinPageControl5: TbsSkinPageControl;
    tab1: TbsSkinTabSheet;
    tab2: TbsSkinTabSheet;
    t_rate: TRxMemoryData;
    t_ch_cust_befbal1: TDataSource;
    t_ch_cust_befbal: TADOQuery;
    t_ch_cust_befbal_sum1: TDataSource;
    t_ch_cust_befbal_sum: TADOQuery;
    t_ch_cust_befbalnew: TADOQuery;
    PopupMenu5: TPopupMenu;
    N7: TMenuItem;
    MenuItem5: TMenuItem;
    MenuItem6: TMenuItem;
    PopupMenu4: TPopupMenu;
    MenuItem4: TMenuItem;
    bsSkinGroupBox3: TbsSkinGroupBox;
    dxDBGrid33: TdxDBGrid;
    dxDBGridMaskColumn210: TdxDBGridMaskColumn;
    dxDBGridMaskColumn211: TdxDBGridMaskColumn;
    dxDBGridMaskColumn212: TdxDBGridMaskColumn;
    dxDBGridMaskColumn213: TdxDBGridMaskColumn;
    dxDBGridColumn118: TdxDBGridColumn;
    dxDBGridColumn119: TdxDBGridColumn;
    dxDBGridColumn120: TdxDBGridColumn;
    Edit1: TEdit;
    bsSkinGroupBox4: TbsSkinGroupBox;
    dxDBGrid34: TdxDBGrid;
    dxDBGridColumn121: TdxDBGridColumn;
    dxDBGridColumn122: TdxDBGridColumn;
    dxDBGridColumn123: TdxDBGridColumn;
    dxDBGridColumn124: TdxDBGridColumn;
    bsSkinGroupBox5: TbsSkinGroupBox;
    dxDBGrid24: TdxDBGrid;
    dxDBGridMaskColumn161: TdxDBGridMaskColumn;
    dxDBGridMaskColumn162: TdxDBGridMaskColumn;
    dxDBGridMaskColumn163: TdxDBGridMaskColumn;
    dxDBGridMaskColumn164: TdxDBGridMaskColumn;
    dxDBGridColumn87: TdxDBGridColumn;
    dxDBGridColumn88: TdxDBGridColumn;
    dxDBGridColumn89: TdxDBGridColumn;
    Edit2: TEdit;
    bsSkinGroupBox6: TbsSkinGroupBox;
    dxDBGrid25: TdxDBGrid;
    dxDBGridColumn90: TdxDBGridColumn;
    dxDBGridColumn91: TdxDBGridColumn;
    dxDBGridColumn92: TdxDBGridColumn;
    dxDBGridColumn93: TdxDBGridColumn;
    tab6: TbsSkinTabSheet;
    DBEdit38: TDBEdit;
    Label117: TLabel;
    Label118: TLabel;
    DBEdit85: TDBEdit;
    t_ch_fee_do_detail: TADOQuery;
    dxDBGrid1Column38: TdxDBGridColumn;
    PopupMenu6: TPopupMenu;
    N8: TMenuItem;
    dxDBGrid2Column15: TdxDBGridColumn;
    Label119: TLabel;
    DBEdit86: TDBEdit;
    bsSkinButton17: TbsSkinButton;
    bsSkinButton32: TbsSkinButton;
    dxDBGrid20Column25: TdxDBGridColumn;
    dxDBGrid20Column26: TdxDBGridColumn;
    dxDBGrid33Column8: TdxDBGridColumn;
    dxDBGrid34Column5: TdxDBGridColumn;
    bsSkinTabSheet14: TbsSkinTabSheet;
    dxDBGrid26: TdxDBGrid;
    dxDBGridColumn94: TdxDBGridColumn;
    dxDBGridMaskColumn165: TdxDBGridMaskColumn;
    dxDBGridColumn95: TdxDBGridColumn;
    dxDBGridColumn96: TdxDBGridColumn;
    dxDBGridColumn97: TdxDBGridColumn;
    dxDBGridColumn98: TdxDBGridColumn;
    dxDBGrid27: TdxDBGrid;
    dxDBGridMaskColumn166: TdxDBGridMaskColumn;
    dxDBGridMaskColumn167: TdxDBGridMaskColumn;
    dxDBGridMaskColumn168: TdxDBGridMaskColumn;
    dxDBGridMaskColumn169: TdxDBGridMaskColumn;
    dxDBGridMaskColumn170: TdxDBGridMaskColumn;
    dxDBGridColumn99: TdxDBGridColumn;
    dxDBGridColumn100: TdxDBGridColumn;
    dxDBGridMaskColumn171: TdxDBGridMaskColumn;
    dxDBGridColumn101: TdxDBGridColumn;
    dxDBGridDateColumn24: TdxDBGridDateColumn;
    dxDBGridMaskColumn172: TdxDBGridMaskColumn;
    dxDBGridMaskColumn173: TdxDBGridMaskColumn;
    dxDBGridColumn102: TdxDBGridColumn;
    dxDBGridMaskColumn174: TdxDBGridMaskColumn;
    dxDBGridMaskColumn175: TdxDBGridMaskColumn;
    dxDBGridMaskColumn176: TdxDBGridMaskColumn;
    v_fee_do_airtruck: TADOQuery;
    v_fee_do_airtruck1: TDataSource;
    v_fee_do_airtruck_sum: TADOQuery;
    v_fee_do_airtruck_sum1: TDataSource;
    v_fee_do_railway: TADOQuery;
    v_fee_do_railway1: TDataSource;
    v_fee_do_railway_sum: TADOQuery;
    v_fee_do_railway_sum1: TDataSource;
    Label120: TLabel;
    DBEdit87: TDBEdit;
    Label121: TLabel;
    DBEdit88: TDBEdit;
    Label122: TLabel;
    wwDBDateTimePicker4: TwwDBDateTimePicker;
    Label123: TLabel;
    Label124: TLabel;
    Label125: TLabel;
    Label126: TLabel;
    DBEdit89: TDBEdit;
    DBEdit90: TDBEdit;
    DBEdit91: TDBEdit;
    wwDBDateTimePicker5: TwwDBDateTimePicker;
    DBEdit92: TDBEdit;
    Label127: TLabel;
    Label128: TLabel;
    DBEdit93: TDBEdit;
    Label129: TLabel;
    DBEdit94: TDBEdit;
    bsSkinScrollBar1: TbsSkinScrollBar;
    cxGrid1DBTableView1: TcxGridDBTableView;
    cxGrid1Level1: TcxGridLevel;
    cxGrid1: TcxGrid;
    cxGrid1DBTableView1DBColumn1: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn2: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn3: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn4: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn5: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn6: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn7: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn8: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn9: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn10: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn11: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn12: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn13: TcxGridDBColumn;
    cxGrid1DBTableView1DBColumn14: TcxGridDBColumn;
    dxDBGrid1Column39: TdxDBGridColumn;
    Panel2: TPanel;
    Label130: TLabel;
    bsSkinButton37: TbsSkinButton;
    t_ch_balanceDSDesigner: TStringField;
    t_ch_balanceDSDesigner2: TStringField;
    t_ch_balanceDSDesigner3: TStringField;
    t_ch_balanceDSDesigner4: TStringField;
    t_ch_balanceDSDesigner5: TStringField;
    t_ch_balanceDSDesigner6: TStringField;
    t_ch_balanceDSDesigner7: TBCDField;
    t_ch_balanceDSDesigner8: TBCDField;
    t_ch_balanceDSDesigner9: TBCDField;
    t_ch_balanceDSDesigner10: TStringField;
    t_ch_balanceDSDesigner11: TStringField;
    t_ch_balanceDSDesigner12: TStringField;
    t_ch_balanceDSDesigner13: TDateTimeField;
    t_ch_balanceDSDesigner14: TBooleanField;
    t_ch_balanceDSDesigner15: TStringField;
    t_ch_balanceDSDesigner16: TStringField;
    t_ch_balanceDSDesigner17: TDateTimeField;
    t_ch_balanceDSDesigner18: TStringField;
    t_ch_balanceDSDesigner19: TStringField;
    t_ch_balanceDSDesigner20: TDateTimeField;
    t_ch_balanceDSDesigner21: TStringField;
    t_ch_balanceDSDesigner22: TBooleanField;
    t_ch_balanceDSDesigner23: TStringField;
    t_ch_balanceDSDesigner24: TBCDField;
    t_ch_balanceDSDesigner25: TBCDField;
    t_ch_balanceDSDesigner26: TStringField;
    t_ch_balanceDSDesigner27: TStringField;
    t_ch_balanceDSDesigner28: TStringField;
    t_ch_balanceDSDesigner29: TStringField;
    t_ch_balanceDSDesigner30: TBCDField;
    t_ch_balanceDSDesigner31: TStringField;
    t_ch_balanceDSDesigner32: TStringField;
    t_ch_balanceDSDesigner33: TStringField;
    dxDBGrid1Column40: TdxDBGridColumn;
    dxDBGrid1Column41: TdxDBGridColumn;
    Label133: TLabel;
    cxDBCalcEdit1: TcxDBCalcEdit;
    t_ch_balanceDSDesigner34: TDateTimeField;
    t_ch_balanceDSDesigner35: TSmallintField;
    t_ch_balanceField: TStringField;
    t_ch_balanceField2: TFloatField;
    t_ch_balanceField3: TFloatField;
    dxDBGrid1Column42: TdxDBGridColumn;
    Label131: TLabel;
    RxDBLookupCombo8: TRxDBLookupCombo;
    t_ch_balanceField4: TStringField;
    dxDBGrid1Column43: TdxDBGridColumn;
    t_ch_balanceField5: TStringField;
    dxDBGrid1Column44: TdxDBGridColumn;
    procedure bsSkinButton5Click(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure FormResize(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure bsSkinButton11Click(Sender: TObject);
    procedure t_ch_balanceAfterInsert(DataSet: TDataSet);
    procedure bsSkinButton1Click(Sender: TObject);
    procedure bsSkinButton2Click(Sender: TObject);
    procedure bsSkinButton4Click(Sender: TObject);
    procedure bsSkinButton3Click(Sender: TObject);
    procedure t_ch_balanceBeforePost(DataSet: TDataSet);
    procedure DBEdit4Enter(Sender: TObject);
    procedure t_ch_balanceBeforeEdit(DataSet: TDataSet);
    procedure RxDBLookupCombo1Enter(Sender: TObject);
    procedure dxDBGrid1Column2CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure DBEdit1Change(Sender: TObject);
    procedure FormCloseQuery(Sender: TObject; var CanClose: Boolean);
    procedure bsSkinButton9Click(Sender: TObject);
    procedure bsSkinButton6Click(Sender: TObject);
    procedure bsSkinButton8Click(Sender: TObject);
    procedure bsSkinButton10Click(Sender: TObject);
    procedure t_ch_balanceAfterPost(DataSet: TDataSet);
    procedure t_ch_balanceAfterDelete(DataSet: TDataSet);
    procedure DBEdit14KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit1KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo1KeyPress(Sender: TObject; var Key: Char);
    procedure wwDBComboBox1KeyPress(Sender: TObject; var Key: Char);
    procedure RxDBLookupCombo2KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit4KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit5KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit6KeyPress(Sender: TObject; var Key: Char);
    procedure bsSkinDBCheckRadioBox1KeyPress(Sender: TObject;
      var Key: Char);
    procedure RxDBLookupCombo3KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit8KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit9KeyPress(Sender: TObject; var Key: Char);
    procedure DBEdit10KeyPress(Sender: TObject; var Key: Char);
    procedure N10Click(Sender: TObject);
    procedure N14Click(Sender: TObject);
    procedure N12Click(Sender: TObject);
    procedure N16Click(Sender: TObject);
    procedure dxDBGrid1ColumnSorting(Sender: TObject;
      Column: TdxDBTreeListColumn; var Allow: Boolean);
    procedure RxDBLookupCombo2Change(Sender: TObject);
    procedure DBEdit42Change(Sender: TObject);
    procedure bsSkinButton21Click(Sender: TObject);
    procedure bsSkinButton25Click(Sender: TObject);
    procedure bsSkinPageControl1Changing(Sender: TObject;
      var AllowChange: Boolean);
    procedure bsSkinButton24Click(Sender: TObject);
    procedure bsSkinButton12Click(Sender: TObject);
    procedure bsSkinPanel5Resize(Sender: TObject);
    procedure bsSkinButton7Click(Sender: TObject);
    procedure N17Click(Sender: TObject);
    procedure N34Click(Sender: TObject);
    procedure N36Click(Sender: TObject);
    procedure N6Click(Sender: TObject);
    procedure N4Click(Sender: TObject);
    procedure bsSkinButton13Click(Sender: TObject);
    procedure RxDBLookupCombo4Enter(Sender: TObject);
    procedure DBEdit51Enter(Sender: TObject);
    procedure t_ch_balanceCalcFields(DataSet: TDataSet);
    procedure bsSkinButton38Click(Sender: TObject);
    procedure RxDBLookupCombo16Change(Sender: TObject);
    procedure RxDBLookupCombo15Change(Sender: TObject);
    procedure RxDBLookupCombo15Enter(Sender: TObject);
    procedure RxDBLookupCombo15Exit(Sender: TObject);
    procedure RxDBLookupCombo16Enter(Sender: TObject);
    procedure RxDBLookupCombo16Exit(Sender: TObject);
    procedure t_ch_balanceBeforeDelete(DataSet: TDataSet);
    procedure bsSkinNotebook1PageChanged(Sender: TObject);
    procedure dxDBGrid6DblClick(Sender: TObject);
    procedure dxDBGrid3DblClick(Sender: TObject);
    procedure dxDBGrid4DblClick(Sender: TObject);
    procedure dxDBGrid5DblClick(Sender: TObject);
    procedure dxDBGrid20DblClick(Sender: TObject);
    procedure t_ch_zhipiaoAfterInsert(DataSet: TDataSet);
    procedure t_ch_zhipiaoBeforeEdit(DataSet: TDataSet);
    procedure t_ch_zhipiaoBeforePost(DataSet: TDataSet);
    procedure bsSkinPageControl1Change(Sender: TObject);
    procedure bsSkinButton15Click(Sender: TObject);
    procedure MenuItem1Click(Sender: TObject);
    procedure bsSkinButton31Click(Sender: TObject);
    procedure bsSkinButton19Click(Sender: TObject);
    procedure bsSkinButton20Click(Sender: TObject);
    procedure bsSkinButton27Click(Sender: TObject);
    procedure bsSkinButton23Click(Sender: TObject);
    procedure bsSkinButton29Click(Sender: TObject);
    procedure bsSkinButton22Click(Sender: TObject);
    procedure bsSkinButton33Click(Sender: TObject);
    procedure bsSkinButton35Click(Sender: TObject);
    procedure bsSkinButton36Click(Sender: TObject);
    procedure bsSkinButton18Click(Sender: TObject);
    procedure t_ch_zhipiaoAfterOpen(DataSet: TDataSet);
    procedure dxDBGrid21DblClick(Sender: TObject);
    procedure bsSkinButton16Click(Sender: TObject);
    procedure RxDBLookupCombo3Change(Sender: TObject);
    procedure RxDBLookupCombo10Change(Sender: TObject);
    procedure RxDBLookupCombo11Change(Sender: TObject);
    procedure t_ch_zhipiaoAfterScroll(DataSet: TDataSet);
    procedure MenuItem4Click(Sender: TObject);
    procedure N7Click(Sender: TObject);
    procedure MenuItem6Click(Sender: TObject);
    procedure t_ch_cust_befbal_sumAfterOpen(DataSet: TDataSet);
    procedure MenuItem3Click(Sender: TObject);
    procedure N8Click(Sender: TObject);
    procedure bsSkinButton17Click(Sender: TObject);
    procedure bsSkinButton34Click(Sender: TObject);
    procedure dxDBGrid20Column25CustomDraw(Sender: TObject;
      ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
      AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
      var AColor: TColor; ASelected, AFocused: Boolean;
      var ADone: Boolean);
    procedure dxDBGrid20Column26CustomDraw(Sender: TObject;
      ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
      AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
      var AColor: TColor; ASelected, AFocused: Boolean;
      var ADone: Boolean);
    procedure fra_ch_add_do1bsSkinButton8Click(Sender: TObject);
    procedure fra_ch_add_do1MenuItem1Click(Sender: TObject);
    procedure dxDBGrid2ColumnSorting(Sender: TObject;
      Column: TdxDBTreeListColumn; var Allow: Boolean);
    procedure dxDBGrid2SelectedCountChange(Sender: TObject);
    procedure dxDBGrid1CustomDraw(Sender: TObject; ACanvas: TCanvas;
      ARect: TRect; ANode: TdxTreeListNode; AColumn: TdxDBTreeListColumn;
      const AText: String; AFont: TFont; var AColor: TColor; ASelected,
      AFocused: Boolean; var ADone: Boolean);
    procedure bsSkinButton37Click(Sender: TObject);
  private
    shench,iszhipiao,ischangecur:boolean;
    procedure zhipiaobankchange(sender:TField);
    procedure zhipiaocustchange(sender:TField);
    procedure zhipiaoCurrencychange(sender:TField);
    procedure zhipiaodatechange(sender:TField);
    procedure zhipiaonumchange(sender:TField);
    procedure getdetail(balno:string);
    procedure closedetail;
    { Private declarations }
  public
    { Public declarations }
   procedure SelectAddVouchers;
   procedure AddVouchers;
  end;

var
  frm_ch_balance_pay: Tfrm_ch_balance_pay;
  ch_balance_pay_open,ch_balance_pay_post,sbpay,notdetail:boolean;

implementation

uses my_sys_function, u_main, u_ch_balance_query, u_data_share,
  {$IFDEF FFLIUCHENG}u_ch_check_do,{$ENDIF} u_ch_shen_query, u_select_curr,
  u_ch_zhipiao_query, u_fee_do_fen, u_sys_progress, u_cw_pingzheng, dmAccu,
  u_cw_pingzheng_jku8, u_cw_pingzheng_u8;

{$R *.dfm}

procedure Tfrm_ch_balance_pay.bsSkinButton5Click(Sender: TObject);
begin
  close;
end;

procedure Tfrm_ch_balance_pay.FormClose(Sender: TObject;
  var Action: TCloseAction);
begin
  ch_balance_pay_open:=false;
  savereggrid(dxdbgrid1,caption+'1');
  savereggrid(dxdbgrid2,caption+'2');
  savereggrid(dxdbgrid3,caption+'3');
  savereggrid(dxdbgrid4,caption+'4');
  savereggrid(dxdbgrid5,caption+'5');
  savereggrid(dxdbgrid6,caption+'6');
  savereggrid(dxdbgrid21,caption+'21');
  savereggrid(fra_ch_add_do1.dxDBGrid19,caption+'19');
  savereggrid(fra_ch_delete_do1.dxDBGrid9,caption+'d9');

  savecxgridview(cxGrid1DBTableView1,'cx'+caption+'1');

  frm_ch_balance_pay.Hide;
  frm_ch_balance_pay.ManualFloat(frm_ch_balance_pay.BoundsRect );
  frm_main.freeTabs('frm_ch_balance_pay');
  ch_balance_pay_open:=false;
  action:=cafree;
  frm_ch_balance_pay:=nil;
end;

procedure Tfrm_ch_balance_pay.FormResize(Sender: TObject);
var
  i:integer;
begin
  //计算按钮长度
  if not iszhipiao then begin
  bsSkinButton13.Visible:=false;
  i:=round(bsSkinPanel2.Width/12);
  bsSkinButton10.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton8.Width:=i;
  bsSkinButton38.Width:=i;
//  bsSkinButton34.Width:=i;
  bsSkinButton37.Width:=i;
  bsSkinButton5.Width:=i;
  end else begin
  bsSkinButton13.Visible:=true;
  i:=round(bsSkinPanel2.Width/13);
  bsSkinButton10.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton8.Width:=i;
  bsSkinButton38.Width:=i;
  bsSkinButton13.Width:=i;
//  bsSkinButton34.Width:=i;
  bsSkinButton37.Width:=i;
  bsSkinButton5.Width:=i;
  end;
end;

procedure Tfrm_ch_balance_pay.FormShow(Sender: TObject);
var
  i:integer;
begin

  bsSkinPageControl1.ActivePageIndex:=0;

  if if_reg(461) and (not vold) then
  begin
    iszhipiao:=true
  end
  else
  begin
    iszhipiao:=false;
  end;

  ischangecur:=true;
{
  if not iszhipiao then
    bskntbshtTBS3.TabVisible:=false;
}


  if not iszhipiao then begin
  bsSkinButton13.Visible:=false;
  i:=round(bsSkinPanel2.Width/12);
  bsSkinButton10.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton8.Width:=i;
  bsSkinButton38.Width:=i;
 // bsSkinButton34.Width:=i;
  bsSkinButton37.Width:=i;
  bsSkinButton5.Width:=i;
  end else begin
  bsSkinButton13.Visible:=true;
  i:=round(bsSkinPanel2.Width/13);
  bsSkinButton10.Width:=i;
  bsSkinButton9.Width:=i;
  bsSkinButton2.Width:=i;
  bsSkinButton3.Width:=i;
  bsSkinButton4.Width:=i;
  bsSkinButton1.Width:=i;
  bsSkinButton11.Width:=i;
  bsSkinButton6.Width:=i;
  bsSkinButton8.Width:=i;
  bsSkinButton38.Width:=i;
  bsSkinButton13.Width:=i;
 // bsSkinButton34.Width:=i;
  bsSkinButton37.Width:=i;
  bsSkinButton5.Width:=i;
  end;

  t_ch_balance.Close;
  t_ch_balance.SQL.clear;
  t_ch_balance.SQL.Add('select top 600 * from t_ch_balance where  财务=0 and  帐单状态<>'+''''+'审核通过'+''''
                   +' and '+open_data('1003','结算人','no','no','no','no')
                   +' and 类型='+''''+'付'+''''+' order by 帐单编号 desc');
  t_ch_balance.open;
//  t_ch_fee_do.open;
  t_ch_check_detail.open;
//  t_no.open;

  ch_balance_pay_open:=true;
  ch_balance_pay_post:=true;
  notdetail:=true;
  //根据是否多业务合并判断
   if StrToBool(get_parameters_value(85,'false')) then begin
    fra_ch_add_do1.bsSkinTabSheet1.TabVisible:=False;
    fra_ch_add_do1.bsSkinTabSheet2.TabVisible:=False;
    fra_ch_add_do1.bsSkinTabSheet3.TabVisible:=False;
    fra_ch_add_do1.bsSkinTabSheet4.TabVisible:=False;
    fra_ch_add_do1.bsSkinTabSheet5.TabVisible:=True;
    fra_ch_add_do1.bsSkinPageControl1.TabIndex:=0;
//    fra_ch_add_do1.bsSkinButton11.Caption:='应付结算';
    fra_ch_add_do1.bsSkinButton11.Visible:=True;
    fra_ch_add_do1.bsSkinCheckRadioBox7.Visible:=True;



    fra_ch_delete_do1.bsSkinTabSheet1.TabVisible:=false;
    fra_ch_delete_do1.bsSkinTabSheet2.TabVisible:=false;
    fra_ch_delete_do1.bsSkinTabSheet3.TabVisible:=false;
    fra_ch_delete_do1.bsSkinTabSheet4.TabVisible:=false;
    fra_ch_delete_do1.bsSkinTabSheet5.TabVisible:=True;
    fra_ch_delete_do1.bsSkinPageControl1.ActivePage:=fra_ch_delete_do1.bsSkinTabSheet5;

    bsSkinTabSheet7.TabVisible:=false;
    bsSkinTabSheet8.TabVisible:=false;
    bsSkinTabSheet9.TabVisible:=false;
    bsSkinTabSheet10.TabVisible:=false;
    bstab5.TabVisible:=true;
    bsSkinPageControl3.ActivePage:=bstab5;




  end else begin
    fra_ch_add_do1.bsSkinTabSheet1.TabVisible:=True;
    fra_ch_add_do1.bsSkinTabSheet2.TabVisible:=True;
    fra_ch_add_do1.bsSkinTabSheet3.TabVisible:=True;
    fra_ch_add_do1.bsSkinTabSheet4.TabVisible:=True;
    fra_ch_add_do1.bsSkinPageControl1.ActivePage:=fra_ch_add_do1.bsSkinTabSheet1;
    fra_ch_add_do1.bsSkinTabSheet5.TabVisible:=False;

    fra_ch_delete_do1.bsSkinTabSheet1.TabVisible:=True;
    fra_ch_delete_do1.bsSkinTabSheet2.TabVisible:=True;
    fra_ch_delete_do1.bsSkinTabSheet3.TabVisible:=True;
    fra_ch_delete_do1.bsSkinTabSheet4.TabVisible:=True;
    fra_ch_delete_do1.bsSkinTabSheet5.TabVisible:=false;
    fra_ch_delete_do1.bsSkinPageControl1.ActivePage:=fra_ch_delete_do1.bsSkinTabSheet1;

    bsSkinTabSheet7.TabVisible:=true;
    bsSkinTabSheet8.TabVisible:=true;
    bsSkinTabSheet9.TabVisible:=true;
    bsSkinTabSheet10.TabVisible:=true;
    bstab5.TabVisible:=false;
    bsSkinPageControl3.ActivePage:=bsSkinTabSheet7;

  end;


  fra_ch_add_do1.do_ban1.DataSet:=t_ch_balance;
  fra_ch_add_do1.bs_text.text:='4';
  fra_ch_add_do1.wwDBComboBox31.text:='付';
  fra_ch_add_do1.t_ch_fee_do.open;
//  getdetail;
{
  if StrToBool(get_parameters_value(85,'false')) then begin
    fra_ch_delete_do1.v_fee_do_bscard.close;
    fra_ch_delete_do1.v_fee_do_bscard.SQL.clear;
    fra_ch_delete_do1.v_fee_do_bscard.sql.add('select * from v_fee_do_bscard '
                                         +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' order by 类型,编号,费用名称');
    fra_ch_delete_do1.v_fee_do_bscard.Open;

    fra_ch_delete_do1.v_fee_do_bscard_sum.close;
    fra_ch_delete_do1.v_fee_do_bscard_sum.SQL.clear;
    fra_ch_delete_do1.v_fee_do_bscard_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_bscard '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),原始币别');
    fra_ch_delete_do1.v_fee_do_bscard_sum.Open;
  end else begin
      fra_ch_delete_do1.v_fee_do_seae.close;
      fra_ch_delete_do1.v_fee_do_seae.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seae.sql.add('select * from v_fee_do_seae '
                                         +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_seae.Open;

      fra_ch_delete_do1.v_fee_do_seai.close;
      fra_ch_delete_do1.v_fee_do_seai.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seai.sql.add('select * from v_fee_do_seai '
                                         +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_seai.Open;

      fra_ch_delete_do1.v_fee_do_aire.close;
      fra_ch_delete_do1.v_fee_do_aire.SQL.clear;
      fra_ch_delete_do1.v_fee_do_aire.sql.add('select * from v_fee_do_aire '
                                         +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_aire.Open;

      fra_ch_delete_do1.v_fee_do_airi.close;
      fra_ch_delete_do1.v_fee_do_airi.SQL.clear;
      fra_ch_delete_do1.v_fee_do_airi.sql.add('select * from v_fee_do_airi '
                                         +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_airi.Open;

      fra_ch_delete_do1.v_fee_do_seae_sum.close;
      fra_ch_delete_do1.v_fee_do_seae_sum.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seae_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_seae '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),原始币别');
      fra_ch_delete_do1.v_fee_do_seae_sum.Open;

      fra_ch_delete_do1.v_fee_do_seai_sum.close;
      fra_ch_delete_do1.v_fee_do_seai_sum.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seai_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_seai '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),原始币别');
      fra_ch_delete_do1.v_fee_do_seai_sum.Open;

      fra_ch_delete_do1.v_fee_do_aire_sum.close;
      fra_ch_delete_do1.v_fee_do_aire_sum.SQL.clear;
      fra_ch_delete_do1.v_fee_do_aire_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开航日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_aire '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),开航日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开航日期,111),1,7),原始币别');
      fra_ch_delete_do1.v_fee_do_aire_sum.Open;

      fra_ch_delete_do1.v_fee_do_airi_sum.close;
      fra_ch_delete_do1.v_fee_do_airi_sum.SQL.clear;
      fra_ch_delete_do1.v_fee_do_airi_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_airi '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),原始币别');
      fra_ch_delete_do1.v_fee_do_airi_sum.open;
  end;
  }
  fra_ch_delete_do1.bs_text.Text:='4';
  fra_ch_delete_do1.do_ban1.DataSet:=t_ch_balance;

  loadreggrid(dxdbgrid1,false,caption+'1');
  loadreggrid(dxdbgrid2,false,caption+'2');
  loadreggrid(dxdbgrid3,false,caption+'3');
  loadreggrid(dxdbgrid4,false,caption+'4');
  loadreggrid(dxdbgrid5,false,caption+'5');
  loadreggrid(dxdbgrid6,false,caption+'6');
  loadreggrid(dxdbgrid21,false,caption+'21');

  loadcxgridview(cxGrid1DBTableView1,'cx'+caption+'1');

  loadreggrid(fra_ch_add_do1.dxDBGrid19,false,caption+'19');
  loadreggrid(fra_ch_delete_do1.dxDBGrid9,false,caption+'d9');  

  //根据是否单币别判断
  sbpay:=StrToBool(get_parameters_value(83,'false'));
  if sbpay then begin
     dxdbgrid1.ColumnByFieldName('币别').Visible:=false;
     dxdbgrid1.ColumnByFieldName('结算金额').Visible:=False;
     dxdbgrid1.ColumnByFieldName('实结金额').Visible:=false;
     dxdbgrid1.ColumnByFieldName('虚结金额').Visible:=False;
     dxdbgrid1.ColumnByFieldName('美元金额').Visible:=True;
     dxdbgrid1.ColumnByFieldName('人民币金额').Visible:=True;
     dxdbgrid1.ColumnByFieldName('美元结算金额').Visible:=false;
     dxdbgrid1.ColumnByFieldName('人民币结算金额').Visible:=false;
     dxdbgrid1.ColumnByFieldName('美元相关号码').Visible:=true;
     dxdbgrid1.ColumnByFieldName('相关号码').Caption:='人民币相关号码';
     bsSkinPanel8.Visible:=true;
     bsSkinPanel9.Visible:=true;
     dxdbgrid2.ColumnByFieldName('申请金额').Visible:=False;
     dxdbgrid2.ColumnByFieldName('实际金额').Visible:=false;
     dxdbgrid2.ColumnByFieldName('虚开金额').Visible:=False;
     dxdbgrid2.ColumnByFieldName('美元金额').Visible:=True;
     dxdbgrid2.ColumnByFieldName('人民币金额').Visible:=True;
     fra_ch_add_do1.bsSkinPanel12.Visible:=true;

     Label69.Visible:=true;
     Label70.Visible:=true;
     DBEdit57.Visible:=true;
     DBEdit58.Visible:=true;
     Label64.visible:=true;
     RxDBLookupCombo11.Visible:=true;
     dxDBGrid1Column22.Visible:=false;
     Label79.Visible:=true;
     DBEdit70.Visible:=true;

     Label29.Visible:=false;
     Label30.Visible:=false;
     DBEdit37.Visible:=false;
     DBEdit21.Visible:=false;

     Label31.Visible:=false;
     Label32.Visible:=false;
     DBEdit22.Visible:=false;
     DBEdit23.Visible:=false;

     Label117.Visible:=false;
     DBEdit38.Visible:=false;
     RxDBLookupCombo10.Width:=325;

  end else begin
     dxdbgrid1.ColumnByFieldName('币别').Visible:=True;
     dxdbgrid1.ColumnByFieldName('结算金额').Visible:=True;
     dxdbgrid1.ColumnByFieldName('实结金额').Visible:=True;
     dxdbgrid1.ColumnByFieldName('虚结金额').Visible:=True;
     dxdbgrid1.ColumnByFieldName('美元结算金额').Visible:=true;
     dxdbgrid1.ColumnByFieldName('人民币结算金额').Visible:=true;
     dxdbgrid1.ColumnByFieldName('美元金额').Visible:=False;
     dxdbgrid1.ColumnByFieldName('人民币金额').Visible:=False;
     dxdbgrid1.ColumnByFieldName('美元相关号码').Visible:=false;
     bsSkinPanel8.Visible:=False;
     bsSkinPanel9.Visible:=False;
     dxdbgrid2.ColumnByFieldName('申请金额').Visible:=True;
     dxdbgrid2.ColumnByFieldName('实际金额').Visible:=True;
     dxdbgrid2.ColumnByFieldName('虚开金额').Visible:=True;
     dxdbgrid2.ColumnByFieldName('美元金额').Visible:=False;
     dxdbgrid2.ColumnByFieldName('人民币金额').Visible:=False;
     fra_ch_add_do1.bsSkinPanel12.Visible:=false;

     Label69.Visible:=false;
     Label70.Visible:=false;
     DBEdit57.Visible:=false;
     DBEdit58.Visible:=false;
     Label64.visible:=false;
     RxDBLookupCombo11.Visible:=false;
     dxDBGrid1Column22.Visible:=true;
     Label79.Visible:=false;
     DBEdit70.Visible:=false;
     Label49.Caption:='相关号码';

     Label29.Visible:=true;
     Label30.Visible:=true;
     DBEdit37.Visible:=true;
     DBEdit21.Visible:=true;

     Label31.Visible:=true;
     Label32.Visible:=true;
     DBEdit22.Visible:=true;
     DBEdit23.Visible:=true;
     Label117.Visible:=true;
     DBEdit38.Visible:=true;
     RxDBLookupCombo10.Width:=165;

  end;

  shench:=false;
  wwDBDateTimePicker1.MinDate:=Logininfo.endday+1;
  wwDBDateTimePicker2.MinDate:=Logininfo.endday+1;
  wwDBDateTimePicker3.MinDate:=Logininfo.endday+1;

  with frm_data_share.t_code_stlmode do begin
    wwDBComboBox1.Items.Clear;
    wwDBComboBox2.Items.Clear;
    wwDBComboBox3.Items.Clear;
    first;
    while not eof do begin
      wwDBComboBox1.Items.Add(fieldbyname('结算方式').AsString);
      wwDBComboBox2.Items.Add(fieldbyname('结算方式').AsString);
      wwDBComboBox3.Items.Add(fieldbyname('结算方式').AsString);
      next;
    end;
  end;

 if not if_reg(494) then begin
    tab2.TabVisible:=false;
    tab6.TabVisible:=false;
  end else begin
    if if_open('344') then
    begin
      t_ch_cust_befbal.Open;
      t_ch_cust_befbal_sum.Open;
    end else begin
      tab2.TabVisible:=false;
      tab6.TabVisible:=false;
    end;
  end;  

 // bsSkinButton37.Enabled:=not t_ch_balance.FieldByName('凭证').AsBoolean;


//  frm_data_share.t_crm_client_all.requery;
  frm_data_share.t_code_currency.requery;
  frm_data_share.t_sys_bank.requery;
  {$IFDEF FFLIUCHENG}
   bsSkinTabSheet2.tabvisible:=true;
  {$ELSE}
   bsSkinTabSheet2.tabvisible:=false;
  {$ENDIF}
//  t_ch_balance.AfterScroll:=getdetail;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton11Click(Sender: TObject);
var
  answer:TModalResult;
begin
  if bsSkinButton11.Caption='编辑修改' then
  begin
    if t_ch_balance.IsEmpty then
      exit;

    if DBEdit42.text='自由'then
    begin
      bsSkinNotebook1.PageIndex:=1;
    end
    else
    begin
      bsSkinNotebook1.PageIndex:=2;
    end;
    bsSkinButton11.Caption:='返回列表';
  end
  else
  begin
    if (t_ch_balance.State=dsinsert)or(t_ch_balance.State=dsedit) then
    BEGIN
      answer:=messagedlg( '数据已经修改，是否保存？',mtWarning,mbYesNoCancel,0);
      if answer=mrYes then
      begin
        t_ch_balance.post;
      end;
      if answer=mrNo then
      begin
        t_ch_balance.cancel;
      end;
      if answer=mrCancel then
      begin
        exit;
      end;
    END;
    bsSkinNotebook1.PageIndex:=0;
    bsSkinButton11.Caption:='编辑修改';
  end;
end;

procedure Tfrm_ch_balance_pay.t_ch_balanceAfterInsert(DataSet: TDataSet);
var
  balno:string;
begin
  t_ch_balance['帐单状态']:='录入状态';
  t_ch_balance['结算类别']:='自由';
  t_ch_balance['结算人']:=employee;
  if Logininfo.endday+1>now then
    t_ch_balance['结算日期']:=Logininfo.endday+1
  else
    t_ch_balance['结算日期']:=now;
  t_ch_balance['自动']:=1;
  t_ch_balance['结算金额']:=0;
  t_ch_balance['实结金额']:=0;
  t_ch_balance['虚结金额']:=0;
  t_ch_balance['预结金额']:=0;
  t_ch_balance['美元金额']:=0;
  t_ch_balance['人民币金额']:=0;
  t_ch_balance['类型']:='付';
  t_ch_balance['财务']:=0;
  t_ch_balance['结算方式']:='支票';
  t_ch_balance['附件数']:=1;

{
  balno:=get_no(date,'BP');
  t_ch_balance['帐单编号']:=balno;
  getdetail(balno);
}

end;

procedure Tfrm_ch_balance_pay.bsSkinButton1Click(Sender: TObject);
begin
  t_ch_balance.insert;
 // if bsSkinNotebook1.PageIndex<>0 then
  getdetail(t_ch_balance.FieldByName('帐单编号').asstring);
  notdetail:=false;
  bsSkinNotebook1.PageIndex:=1;
  bsSkinButton11.Caption:='返回列表';
  notdetail:=true;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton2Click(Sender: TObject);
begin
  table_post(t_ch_balance);
end;

procedure Tfrm_ch_balance_pay.bsSkinButton4Click(Sender: TObject);
begin
  //删除帐单及明细
  if t_ch_balance.IsEmpty then
    exit;
  if (t_ch_balance.FieldByName('帐单状态').asstring='审核通过')then
  begin
    showmessage('当前业务操作的状态不允许删除！！');
    exit;
  end;

  if trim(GetBalanceVou(t_ch_balance.fieldbyname('帐单编号').AsString))<>'' then
  begin
    showmessage('已经生成凭证！！');
    exit;
  end;

{
  if trim(t_ch_balance.FieldByName('财务凭证').asstring)<>''then
  begin
    showmessage('已经生成凭证不允许删除！！');
    exit;
  end;
}


  if application.MessageBox('您确定要删除数据吗?','警告:',MB_OKCANCEL)=IDOK then
  begin

   if not ASSIGNED(frm_sys_progress) then
    frm_sys_progress:=tfrm_sys_progress.Create(application);
    frm_sys_progress.bsSkinGauge1.ProgressText:='正在处理数据请等候。。。';
    frm_sys_progress.Show;
    frm_main.db.BeginTrans;
    try
      delete_ch(4,t_ch_balance);
      t_ch_fee_do.open;
      frm_sys_progress.bsSkinGauge1.MaxValue:=t_ch_fee_do.RecordCount+2;
      frm_sys_progress.bsSkinGauge1.MinValue:=0;
      frm_sys_progress.bsSkinGauge1.Value:=0;
      t_ch_fee_do.first;
      while not t_ch_fee_do.eof do
      begin
       Setfee(1,t_ch_fee_do.fieldbyname('CH_ID').AsInteger,t_ch_fee_do.fieldbyname('原始金额').AsCurrency);
       frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;
       t_ch_fee_do.delete;
      end;
      t_ch_fee_do.close;
      t_ch_fee_do_detail.close;
      t_ch_fee_do_detail.sql.text:='select * from t_ch_cust_befbal where 帐单编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+'''';
      t_ch_fee_do_detail.open;
      while not t_ch_fee_do_detail.eof do
        t_ch_fee_do_detail.delete;
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;

      if t_ch_balance.FieldByName('结算类别').asstring<>'自由'then
      begin
        p_update.Parameters.ParamByName('SQLStr').value:='update t_ch_check set 申请状态='
                                                      +''''+'批准支付'+''''+',帐单编号='+''''+''''
                                                      +' where 帐单编号='+''''
                                                      +t_ch_balance.FieldByName('帐单编号').asstring+'''';
        p_update.ExecProc;
        if t_ch_check.Active then
        t_ch_check.requery;
      end;
       p_update.Parameters.ParamByName('SQLStr').value:='update t_ch_dui_auto set 结算日期=null'
                                                      +',帐单编号='+''''+''''
                                                      +' where 帐单编号='+''''
                                                      +t_ch_balance.FieldByName('帐单编号').asstring+'''';
        p_update.ExecProc;      
      t_ch_balance.Delete;
      if bsSkinNotebook1.PageIndex<>0 then
       getdetail(t_ch_balance.fieldbyname('帐单编号').AsString);
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;



      frm_main.db.CommitTrans;
    finally
      frm_sys_progress.Close;
      frm_sys_progress.Free;
      frm_sys_progress:=nil;

      if frm_main.db.InTransaction then begin
        ShowMessage('删除账单时出错，请刷新重试！');
        frm_main.db.RollbackTrans;
      end;

    end;
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton3Click(Sender: TObject);
begin
  table_cancel(t_ch_balance);
end;

procedure Tfrm_ch_balance_pay.t_ch_balanceBeforePost(DataSet: TDataSet);
begin

  table_before_post(t_ch_balance,'客户名称');
  if not sbpay then
  table_before_post(t_ch_balance,'币别');
  t_ch_balance['结算金额']:=s_w(strtoint(apointnum),t_ch_balance['结算金额']);
  t_ch_balance['实结金额']:=s_w(strtoint(apointnum),t_ch_balance['实结金额']);
  t_ch_balance['虚结金额']:=s_w(strtoint(apointnum),t_ch_balance['虚结金额']);
  t_ch_balance['美元金额']:=s_w(strtoint(apointnum),t_ch_balance['美元金额']);
  t_ch_balance['人民币金额']:=s_w(strtoint(apointnum),t_ch_balance['人民币金额']);
  if t_ch_balance.FieldByName('自动').asboolean then
  begin
    t_ch_balance['结算金额']:=t_ch_balance['实结金额']-t_ch_balance['预结金额'];
  end
  else
  begin
    {if t_ch_balance['结算金额']<t_ch_balance['实结金额'] then
    begin
      showmessage('对不起您结算金额不能小于实结金额！！');
      abort;
    end; }
  end;

  if (t_ch_balance.state=dsinsert) and (trim(t_ch_balance.FieldByName('帐单编号').AsString)='') then
  begin
    t_ch_balance['帐单编号']:=get_no(date,'BP');
    getdetail(t_ch_balance['帐单编号']);
  end;

  t_ch_balance['帐单状态']:=t_ch_balance['帐单状态'];
  t_ch_balance['虚结金额']:=t_ch_balance['结算金额']+t_ch_balance['预结金额']-t_ch_balance['实结金额'];



{
    if StrToBool(get_parameters_value(85,'false')) then begin
      if fra_ch_delete_do1.v_fee_do_bscard.active then
      fra_ch_delete_do1.v_fee_do_bscard.close;
      if fra_ch_delete_do1.v_fee_do_bscard_sum.active then
      fra_ch_delete_do1.v_fee_do_bscard_sum.close;
    end else begin
      fra_ch_delete_do1.v_fee_do_seae.Open;
      fra_ch_delete_do1.v_fee_do_seai.Open;
      fra_ch_delete_do1.v_fee_do_aire.Open;
      fra_ch_delete_do1.v_fee_do_airi.Open;
      fra_ch_delete_do1.v_fee_do_seai_sum.Open;
      fra_ch_delete_do1.v_fee_do_aire_sum.Open;
      fra_ch_delete_do1.v_fee_do_airi_sum.Open;
    end;

 }
end;

procedure Tfrm_ch_balance_pay.DBEdit4Enter(Sender: TObject);
begin
  if bsSkinDBCheckRadioBox1.Checked then
    DBEdit4.ReadOnly:=true
  else
    DBEdit4.ReadOnly:=false;
end;

procedure Tfrm_ch_balance_pay.t_ch_balanceBeforeEdit(DataSet: TDataSet);
var
  sdate:tdate;
begin
  if not modify_all then
  begin
    if (t_ch_balance.FieldByName('帐单状态').asstring='审核通过')then
    begin
      showmessage('当前业务操作的状态不允许更改');
      abort;
    end;
  end;

  if  Trim(t_ch_balance.fieldbyname('财务凭证').AsString)<>'' then
  begin
    ShowMessage('已经生成凭证');
    abort;
  end;


//根据月末结账判断
{
  sdate:=Logininfo.endday+1;
  if not t_ch_balance.FieldByName('结算日期').IsNull then
  if (sdate>t_ch_balance['结算日期']) and (not shench) then begin
    MessageDlg('此票结算单已月末结账,如果删除请先反结账！',mtError,[mbok],0);
    abort;
  end;
}
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo1Enter(Sender: TObject);
begin

  if StrToBool(get_parameters_value(85,'false')) then begin
  if fra_ch_delete_do1.v_fee_do_bscard.IsEmpty then
  begin
    RxDBLookupCombo1.ReadOnly:=false;
    RxDBLookupCombo2.ReadOnly:=false;
  end
  else
  begin
    RxDBLookupCombo1.ReadOnly:=true;
    RxDBLookupCombo2.ReadOnly:=true;
  end;

  end else begin

  if  fra_ch_delete_do1.v_fee_do_seae.IsEmpty and fra_ch_delete_do1.v_fee_do_seai.IsEmpty
  and fra_ch_delete_do1.v_fee_do_aire.IsEmpty and fra_ch_delete_do1.v_fee_do_airi.IsEmpty then
  begin
    RxDBLookupCombo1.ReadOnly:=false;
    RxDBLookupCombo2.ReadOnly:=false;
  end
  else
  begin
    RxDBLookupCombo1.ReadOnly:=true;
    RxDBLookupCombo2.ReadOnly:=true;
  end;
  end;
end;

procedure Tfrm_ch_balance_pay.dxDBGrid1Column2CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  if (ANode.strings[dxDBGrid1Column2.Index]='录入状态') then
    AColor :=clwhite
  else  if (ANode.strings[dxDBGrid1Column2.Index]='审核通过') then
    AColor :=$00DDF21C;

  AFont.Color:=clblack;
end;

procedure Tfrm_ch_balance_pay.DBEdit1Change(Sender: TObject);
begin
  if (DBEdit1.Text='') or (DBEdit1.Text='录入状态')then
    DBEdit1.Color:=clwhite
  else if (DBEdit1.Text='批准开票') or (DBEdit1.Text='审核通过') then
    DBEdit1.Color:=$00DDF21C;
end;

procedure Tfrm_ch_balance_pay.FormCloseQuery(Sender: TObject;
  var CanClose: Boolean);
begin
  CanClose:=frm_close_query(t_ch_balance);
end;

procedure Tfrm_ch_balance_pay.bsSkinButton9Click(Sender: TObject);
begin
  if bsSkinNotebook1.PageIndex=0 then
  getdetail(t_ch_balance.fieldbyname('帐单编号').AsString);

  if StrToBool(get_parameters_value(85,'false')) then begin
    sys_print('应付费用结算',2,t_ch_balance1,nil,
      nil,nil,fra_ch_delete_do1.v_fee_do_bscard1,nil,
      nil,nil,
    t_ch_balance1,fra_ch_delete_do1.v_fee_do_bscard_sum1,nil);
  end else begin

    sys_print('应付费用结算',2,t_ch_balance1,nil,
      nil,nil,fra_ch_delete_do1.v_fee_do_seae1,fra_ch_delete_do1.v_fee_do_seai1,
      fra_ch_delete_do1.v_fee_do_aire1,fra_ch_delete_do1.v_fee_do_airi1,
    t_ch_balance1,fra_ch_delete_do1.v_fee_do_seae_sum1,fra_ch_delete_do1.v_fee_do_seai_sum1);
  end;
//  if bsSkinNotebook1.PageIndex=0 then
//  closedetail;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton6Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton6.ClientToScreen(Point(0,bsSkinButton6.Height));
  PopupMenu6.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_ch_balance_pay.bsSkinButton8Click(Sender: TObject);
begin
  if t_ch_balance.IsEmpty then
    exit;

  if not if_open('256') then
  begin
    showmessage('对不起你没有此模块的操作权限！');
    exit;
  end;

  if t_ch_balance.FieldByName('帐单状态').asstring='录入状态'then
  begin
    showmessage('帐单没有必要取消审核！！');
  end
  else
  begin
    try
      modify_all:=true;
      shench:=true;
      t_ch_balance.edit;
      t_ch_balance['帐单状态']:='录入状态';
      t_ch_balance['审核人']:='';
      t_ch_balance['审核日期']:=null;
      t_ch_balance.post;
      shench:=false;
      modify_all:=false;
    except
      shench:=false;
      modify_all:=false;
      showmessage('审核失败！！');
    end;
    t_ch_balance.Refresh; 
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton10Click(Sender: TObject);
begin
  ch_balance_pay_open:=false;
  try
    frm_ch_balance_query:=tfrm_ch_balance_query.Create (self);
    balance_query_type:=4;
    frm_ch_balance_query.bsSkinGroupBox2.Visible:=true;
    frm_ch_balance_query.ShowModal;
    bsSkinNotebook1.PageIndex:=0;
  finally
    frm_ch_balance_query.Free;
    ch_balance_pay_open:=true;
  end;
end;

procedure Tfrm_ch_balance_pay.t_ch_balanceAfterPost(DataSet: TDataSet);
begin
  t_ch_balance.Refresh;
//保存后刷新

  if not ch_balance_pay_post then exit;

  if StrToBool(get_parameters_value(85,'false')) then begin
    if bsSkinNotebook1.PageIndex=1 then begin
      fra_ch_delete_do1.v_fee_do_bscard.DisableControls;
      fra_ch_delete_do1.v_fee_do_bscard_sum.DisableControls;
      fra_ch_delete_do1.v_fee_do_bscard.Requery;
      fra_ch_delete_do1.v_fee_do_bscard_sum.Requery;
      fra_ch_delete_do1.v_fee_do_bscard.EnableControls;
      fra_ch_delete_do1.v_fee_do_bscard_sum.EnableControls;
    end;
  end else begin
    if fra_ch_delete_do1.v_fee_do_seae.active then begin
      fra_ch_delete_do1.v_fee_do_seae.Requery;
      fra_ch_delete_do1.v_fee_do_seae_sum.Requery;
    end;
    if fra_ch_delete_do1.v_fee_do_seai.active then begin
      fra_ch_delete_do1.v_fee_do_seai.Requery;
      fra_ch_delete_do1.v_fee_do_seai_sum.Requery;
    end;
    if fra_ch_delete_do1.v_fee_do_aire.active then begin
      fra_ch_delete_do1.v_fee_do_aire.Requery;
      fra_ch_delete_do1.v_fee_do_aire_sum.Requery;
    end;
    if fra_ch_delete_do1.v_fee_do_airi.active then begin
      fra_ch_delete_do1.v_fee_do_airi.Requery;
      fra_ch_delete_do1.v_fee_do_airi_sum.Requery;
    end;
  if if_ch_delete_do then
  begin
    case delete_do_type_num of
      1,2,3,4,5:
      begin
        if fra_ch_add_do1.t_op_seae.Active then
        begin
          fra_ch_add_do1.t_ch_fee.Requery();
          fra_ch_add_do1.t_ch_fee_sum.Requery();
        end;
      end;
    end;
  end;
  end;
{
  case delete_do_type_num of
    1,2,3,4:
    begin
      check_do_sum(4,t_ch_balance,
                   fra_ch_delete_do1.v_fee_do_seae_sum,fra_ch_delete_do1.v_fee_do_seai_sum,
                  fra_ch_delete_do1.v_fee_do_aire_sum,fra_ch_delete_do1.v_fee_do_airi_sum);
    end;
  end;
 }

  delete_do_type_num:=0;
  if_ch_delete_do:=false;

end;

procedure Tfrm_ch_balance_pay.t_ch_balanceAfterDelete(DataSet: TDataSet);
begin
  if fra_ch_add_do1.v_op_bscard.Active then
    fra_ch_add_do1.v_op_bscard.Requery();
  if fra_ch_add_do1.t_op_seae.Active then
    fra_ch_add_do1.t_op_seae.Requery();
  if fra_ch_add_do1.t_op_seai.Active then
    fra_ch_add_do1.t_op_seai.Requery();
  if fra_ch_add_do1.t_op_aire.Active then
    fra_ch_add_do1.t_op_aire.Requery();
  if fra_ch_add_do1.t_op_airi.Active then
    fra_ch_add_do1.t_op_airi.Requery();
end;

procedure Tfrm_ch_balance_pay.DBEdit14KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit1);
end;

procedure Tfrm_ch_balance_pay.DBEdit1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo1);
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_wwDBComboBox(Key,wwDBComboBox1);
end;

procedure Tfrm_ch_balance_pay.wwDBComboBox1KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_RxDBLookupCombo(Key,RxDBLookupCombo2);
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo2KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit4);
end;

procedure Tfrm_ch_balance_pay.DBEdit4KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit5);
end;

procedure Tfrm_ch_balance_pay.DBEdit5KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit6);
end;

procedure Tfrm_ch_balance_pay.DBEdit6KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_bsSkinDBCheckRadioBox(Key,bsSkinDBCheckRadioBox1);
end;

procedure Tfrm_ch_balance_pay.bsSkinDBCheckRadioBox1KeyPress(
  Sender: TObject; var Key: Char);
begin
//  key_RxDBLookupCombo(Key,RxDBLookupCombo3);
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo3KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit8);
end;

procedure Tfrm_ch_balance_pay.DBEdit8KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit9);
end;

procedure Tfrm_ch_balance_pay.DBEdit9KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBEdit(Key,DBEdit10);
end;

procedure Tfrm_ch_balance_pay.DBEdit10KeyPress(Sender: TObject;
  var Key: Char);
begin
  key_DBMemo(Key,DBMemo1);
end;

procedure Tfrm_ch_balance_pay.N10Click(Sender: TObject);
begin
  update_grid_view_no(dxdbgrid1);
end;

procedure Tfrm_ch_balance_pay.N14Click(Sender: TObject);
begin
  update_grid_view_all(dxdbgrid1);
end;

procedure Tfrm_ch_balance_pay.N12Click(Sender: TObject);
begin
  update_grid(dxdbgrid1,3);
end;

procedure Tfrm_ch_balance_pay.N16Click(Sender: TObject);
begin
  grid_save_xls(dxdbgrid1);
end;

procedure Tfrm_ch_balance_pay.dxDBGrid1ColumnSorting(Sender: TObject;
  Column: TdxDBTreeListColumn; var Allow: Boolean);
begin
  Column_sort(Column,t_ch_balance,'帐单编号');
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo2Change(Sender: TObject);
begin
  if (t_ch_balance.state=dsinsert)or(t_ch_balance1.state=dsedit)then
  begin
    if RxDBLookupCombo2.DisplayValues[0]<>''then
    begin
      if frm_data_share.t_sys_bank.Locate('币别',RxDBLookupCombo2.DisplayValues[0],[])then
      begin
        t_ch_balance['银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
      end;
    end;
  end;
end;

procedure Tfrm_ch_balance_pay.DBEdit42Change(Sender: TObject);
begin
  if bsSkinNotebook1.PageIndex<>0 then
  begin
    if DBEdit42.text='自由'then
    begin
      bsSkinNotebook1.PageIndex:=1;
    end
    else
    begin
      bsSkinNotebook1.PageIndex:=2;
    end;
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton21Click(Sender: TObject);
begin
  close;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton25Click(Sender: TObject);
var
  sdate:TDate;
  aList:TStringList;
  i:integer;
  billnos:string;
  Current,bm: TBookmarkStr;
begin
  {$IFDEF FFLIUCHENG}
  if t_ch_check.IsEmpty then
    exit;
  if (t_ch_check.FieldByName('申请状态').asstring<>'批准支付') and
     (t_ch_check.FieldByName('申请状态').asstring<>'禁止修改') then
  begin
    showmessage('当前申请状态不能实现支付！！');
    exit;
  end;

  sdate:=EncodeDate(Logininfo.offyear,Logininfo.offmonth,1);
  if sdate>now then
  begin
    if MessageDlg('由于本月已经结账,如果结算结算日期将为'+datetostr(sdate)+',确实要结算吗？',mtWarning,[mbyes,mbno],0)<>mryes then
      exit;
  end;

  aList:=TStringList.create;
  try
    t_ch_check.DisableControls;
    t_ch_fee_do_check.DisableControls;
    if dxDBGrid2.SelectedCount>0 then
    begin
      billnos:='';
      aList.Clear;
      for i:=0 to dxDBGrid2.SelectedCount-1 do
      begin
        t_ch_check.GotoBookmark(pointer(dxDBGrid2.selectedrows[i]));
        if aList.IndexOf(t_ch_check['客户名称'])<0 then
          aList.Add(t_ch_check['客户名称']);

        if billnos='' then billnos:=t_ch_check.fieldbyname('申请编号').asstring
        else billnos:=billnos+','+t_ch_check.fieldbyname('申请编号').asstring;

      end;
      if aList.Count>1 then begin
        showmessage('不相同的客户不能同时结算:'+#13#10+aList.Text);
        exit;
      end;
    end
    else
    begin
      billnos:='';
      aList.Clear;
      aList.Add(t_ch_check['客户名称']);
      if billnos='' then billnos:=t_ch_check.fieldbyname('申请编号').asstring
      else billnos:=billnos+','+t_ch_check.fieldbyname('申请编号').asstring;
      if aList.Count=0 then begin
        showmessage('没有需要结算的信息:'+#13#10+aList.Text);
        exit;
      end;
    end;
  finally
    aList.free;
    t_ch_check.EnableControls;
    t_ch_fee_do_check.EnableControls;
  end;


  try
    frm_ch_check_do:=tfrm_ch_check_do.Create (self);
    frm_ch_check_do.Edit1.text:=t_ch_check.fieldbyname('相关号码').asstring;
    frm_ch_check_do.Memo1.text:='申请号码:'+billnos;
    frm_ch_check_do.ShowModal;
  finally
    frm_ch_check_do.Free;
    frm_ch_check_do:=nil;
  end;
  {$ENDIF}

end;

procedure Tfrm_ch_balance_pay.bsSkinPageControl1Changing(Sender: TObject;
  var AllowChange: Boolean);
begin
  if ch_balance_pay_open then
  begin
    if (t_ch_balance.State=dsinsert)or(t_ch_balance.State=dsedit) then
    BEGIN
      if application.MessageBox('数据已经修改，是否保存？','警告:',MB_OKCANCEL)=IDOK then
        t_ch_balance.post
      else
        t_ch_balance.cancel;
    END;
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton24Click(Sender: TObject);
begin
  try
    frm_ch_shen_query:=tfrm_ch_shen_query.Create (self);
    shen_query_type:=6;
    shen_query_limited:='1003';
    shen_query_op_limited:='no';
    frm_ch_shen_query.ShowModal;
  finally
    frm_ch_shen_query.Free;
    frm_ch_shen_query:=nil;
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton12Click(Sender: TObject);
begin
  t_ch_check.close;
  t_ch_check.sql.clear;
  t_ch_check.sql.add('select * from t_ch_check ');
  t_ch_check.sql.add('where 申请状态 in (''批准支付'',''禁止修改'')');
  t_ch_check.sql.add('AND 要求支付日期>:Date1 and 要求支付日期<:Date2');
  t_ch_check.Parameters.ParamByName('Date1').Value:=Date-1;
  t_ch_check.Parameters.ParamByName('Date2').Value:=Date+1;
  t_ch_check.sql.add('order by 申请编号');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.bsSkinPanel5Resize(Sender: TObject);
var
  i:integer;
begin
  i:=round(bsSkinPanel5.width/5);
  bsSkinButton24.width:=i;
  bsSkinButton12.width:=i;
  bsSkinButton7.width:=i;
  bsSkinButton25.width:=i;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton7Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton7.ClientToScreen(Point(0,bsSkinButton7.Height));
  PopupMenu3.Popup(Pnt.x,Pnt.y);
end;

procedure Tfrm_ch_balance_pay.N17Click(Sender: TObject);
begin
  t_ch_check.Close;
  t_ch_check.SQL.clear;
  t_ch_check.SQL.Add('select * from t_ch_check where 申请状态 in ('+''''+'申请支付'+''''
                   +') '
                   +'order by 申请编号 desc');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.N34Click(Sender: TObject);
begin
  t_ch_check.Close;
  t_ch_check.SQL.clear;
  t_ch_check.SQL.Add('select * from t_ch_check where 申请状态 in ('+''''+'驳回申请'+''''
                   +','+''''+'禁止修改'+''''+') '
                   +'order by 申请编号 desc');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.N36Click(Sender: TObject);
begin
  t_ch_check.Close;
  t_ch_check.SQL.clear;
  t_ch_check.SQL.Add('select * from t_ch_check where 申请状态 in ('+''''+'提交申请'+''''
                   +','+''''+'申请修改'+''''+') '
                   +'order by 申请编号 desc');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.N6Click(Sender: TObject);
begin
  t_ch_check.Close;
  t_ch_check.SQL.clear;
  t_ch_check.SQL.Add('select * from t_ch_check where 申请状态 in ('+''''+'批准支付'+''''
                   +','+''''+'禁止修改'+''''+') '
                   +'order by 申请编号 desc');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.N4Click(Sender: TObject);
begin
  t_ch_check.Close;
  t_ch_check.SQL.clear;
  t_ch_check.SQL.Add('select * from t_ch_check where 申请状态 in ('+''''+'支付完毕'+''''+') '
                   +'order by 申请编号 desc');
  t_ch_check.open;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton13Click(Sender: TObject);
var
  afield : variant;
  i: Integer;
begin
 //生成支票
  t_ch_zhipiao.close;
  t_ch_zhipiao.sql.clear;
  t_ch_zhipiao.sql.add('select top 50 * from t_ch_zhipiao order by 开票日期 desc');
  t_ch_zhipiao.open;
  if sbpay then begin
    if (t_ch_balance.FieldByName('美元金额').AsFloat<>0) and (t_ch_balance.FieldByName('人民币金额').AsFloat<>0) then begin
      frm_select_curr:=Tfrm_select_curr.Create(self);
      try
        if frm_select_curr.ShowModal=mrok then begin
          if frm_select_curr.bsSkinRadioGroup1.ItemIndex=0 then begin
            t_ch_zhipiao.Insert;
            t_ch_zhipiao['支票金额']:=t_ch_balance['人民币金额'];
            t_ch_zhipiao['币别']:='RMB';
            t_ch_zhipiao['客户名称']:=t_ch_balance['客户名称'] ;
            t_ch_zhipiao['银行代码']:=t_ch_balance['银行代码'] ;
            bsSkinPageControl1.ActivePage:=bskntbshtTBS3;
            bsSkinPageControl4.ActivePage:=bsSkinTabSheet12;
            t_ch_zhipiao.Post;
          end else begin
            t_ch_zhipiao.Insert;
            t_ch_zhipiao['支票金额']:=t_ch_balance['美元金额'];
            t_ch_zhipiao['币别']:='USD';
            t_ch_zhipiao['客户名称']:=t_ch_balance['客户名称'] ;
            t_ch_zhipiao['银行代码']:=t_ch_balance['美元银行代码'] ;
            bsSkinPageControl1.ActivePage:=bskntbshtTBS3;
            bsSkinPageControl4.ActivePage:=bsSkinTabSheet12;
            t_ch_zhipiao.Post;
          end;
        end;
      finally
        freeandnil(frm_select_curr);
      end;
    end else if (t_ch_balance.FieldByName('美元金额').AsFloat<>0) then begin
      t_ch_zhipiao.Insert;
      t_ch_zhipiao['支票金额']:=t_ch_balance['美元金额'];
      t_ch_zhipiao['币别']:='USD';
      t_ch_zhipiao['客户名称']:=t_ch_balance['客户名称'] ;
      t_ch_zhipiao['银行代码']:=t_ch_balance['美元银行代码'] ;
      bsSkinPageControl1.ActivePage:=bskntbshtTBS3;
      bsSkinPageControl4.ActivePage:=bsSkinTabSheet12;
      t_ch_zhipiao.Post;
    end else if (t_ch_balance.FieldByName('人民币金额').AsFloat<>0) then begin
      t_ch_zhipiao.Insert;
      t_ch_zhipiao['支票金额']:=t_ch_balance['人民币金额'];
      t_ch_zhipiao['币别']:='RMB';
      t_ch_zhipiao['客户名称']:=t_ch_balance['客户名称'] ;
      t_ch_zhipiao['银行代码']:=t_ch_balance['银行代码'] ;
      bsSkinPageControl1.ActivePage:=bskntbshtTBS3;
      bsSkinPageControl4.ActivePage:=bsSkinTabSheet12;
      t_ch_zhipiao.Post;
    end;
  end else begin
    t_ch_zhipiao.Insert;
    t_ch_zhipiao['支票金额']:=t_ch_balance['结算金额'];
    t_ch_zhipiao['币别']:=t_ch_balance['币别'];
    t_ch_zhipiao['客户名称']:=t_ch_balance['客户名称'] ;
    t_ch_zhipiao['银行代码']:=t_ch_balance['银行代码'] ;
    bsSkinPageControl1.ActivePage:=bskntbshtTBS3;
    bsSkinPageControl4.ActivePage:=bsSkinTabSheet12;
    t_ch_zhipiao.Post;
  end;


end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo4Enter(Sender: TObject);
begin
  if StrToBool(get_parameters_value(85,'false')) then begin
  if fra_ch_delete_do1.v_fee_do_bscard.IsEmpty then
  begin
    RxDBLookupCombo4.ReadOnly:=false;
  end
  else
  begin
    RxDBLookupCombo4.ReadOnly:=true;
  end;

  end else begin
  if  fra_ch_delete_do1.v_fee_do_seae.IsEmpty and fra_ch_delete_do1.v_fee_do_seai.IsEmpty
  and fra_ch_delete_do1.v_fee_do_aire.IsEmpty and fra_ch_delete_do1.v_fee_do_airi.IsEmpty then
  begin
    RxDBLookupCombo4.ReadOnly:=false;
  end
  else
  begin
    RxDBLookupCombo4.ReadOnly:=true;
  end;
  end;
end;

procedure Tfrm_ch_balance_pay.DBEdit51Enter(Sender: TObject);
begin
  if bsSkinDBCheckRadioBox2.Checked then
    DBEdit51.ReadOnly:=true
  else
    DBEdit51.ReadOnly:=false;

end;

procedure Tfrm_ch_balance_pay.t_ch_balanceCalcFields(DataSet: TDataSet);
begin
  if dataset.FieldByName('币别').AsString='USD' then begin
    dataset.FieldByName('美元结算金额').AsFloat:=dataset.fieldbyname('结算金额').AsFloat;
    dataset.FieldByName('人民币结算金额').AsFloat:=0;
  end else begin
    dataset.FieldByName('人民币结算金额').AsFloat:=dataset.fieldbyname('结算金额').AsFloat;
    dataset.FieldByName('美元结算金额').AsFloat:=0;
  end;
 if frm_data_share.t_crm_client.Locate('客户简称',t_ch_balance.fieldbyname('客户名称').asstring,[])then begin
    t_ch_balance.fieldbyname('财务代码').asstring:=frm_data_share.t_crm_client.fieldbyname('财务应付帐款代码').asstring;
    t_ch_balance.fieldbyname('客户代码').asstring:=frm_data_share.t_crm_client.fieldbyname('代码').asstring;
 end;

end;

procedure Tfrm_ch_balance_pay.bsSkinButton38Click(Sender: TObject);
var
  book1:Tbookmark;
begin
 if t_ch_balance.IsEmpty then
      exit;
  if bsSkinNotebook1.PageIndex=0 then
  begin
    book1:=t_ch_balance.GetBookmark;
    t_ch_balance.Requery;
    t_ch_balance.GotoBookmark(book1);
  end
  else
  begin
    book1:=t_ch_balance.GetBookmark;
    t_ch_balance.Refresh;
    t_ch_balance.GotoBookmark(book1);
  end;


{
  if t_ch_balance=nil then
    exit;
  book1:=t_ch_balance.GetBookmark;
  t_ch_balance.Refresh;
  t_ch_balance.GotoBookmark(book1);
}
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo16Change(Sender: TObject);
begin
   if not frm_data_share.t_sys_bank.IsEmpty then
  if frm_data_share.t_sys_bank.Locate('代码',RxDBLookupCombo16.DisplayValues[0],[])then begin
    t_ch_balance['美元银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
  end else begin
    t_ch_balance['美元银行']:='';
  end;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo15Change(Sender: TObject);
begin
  if not frm_data_share.t_sys_bank.IsEmpty then
  if frm_data_share.t_sys_bank.Locate('代码',RxDBLookupCombo15.DisplayValues[0],[])then begin
    t_ch_balance['银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
  end else begin
    t_ch_balance['银行']:='';
  end;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo15Enter(Sender: TObject);
begin
  frm_data_share.t_sys_bank.Filtered:=false;
  if sbpay then begin
    frm_data_share.t_sys_bank.Filter:='币别=''RMB''';
    frm_data_share.t_sys_bank.Filtered:=true;
  end;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo15Exit(Sender: TObject);
begin
  frm_data_share.t_sys_bank.Filtered:=false;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo16Enter(Sender: TObject);
begin
  frm_data_share.t_sys_bank.Filtered:=false;
  frm_data_share.t_sys_bank.Filter:='币别=''USD''';
  frm_data_share.t_sys_bank.Filtered:=true;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo16Exit(Sender: TObject);
begin
  frm_data_share.t_sys_bank.Filtered:=false;
end;

procedure Tfrm_ch_balance_pay.t_ch_balanceBeforeDelete(DataSet: TDataSet);
var
  sdate:tdate;
begin
{
  sdate:=Logininfo.endday+1;
  if not t_ch_balance.FieldByName('结算日期').IsNull then
  if sdate>t_ch_balance['结算日期'] then begin
    MessageDlg('此票结算单已月末结账,如果删除请先反结账！',mtError,[mbok],0);
    abort;
  end;
}
end;

procedure Tfrm_ch_balance_pay.bsSkinNotebook1PageChanged(Sender: TObject);
begin
  if not notdetail then exit;
  getdetail(t_ch_balance.fieldbyname('帐单编号').AsString);
end;

procedure Tfrm_ch_balance_pay.dxDBGrid6DblClick(Sender: TObject);
begin
  fee_view(v_fee_do_seae.fieldbyname('编号').asstring);
end;

procedure Tfrm_ch_balance_pay.dxDBGrid3DblClick(Sender: TObject);
begin
  fee_view(v_fee_do_seai.fieldbyname('编号').asstring);

end;

procedure Tfrm_ch_balance_pay.dxDBGrid4DblClick(Sender: TObject);
begin
  fee_view(v_fee_do_aire.fieldbyname('编号').asstring);

end;

procedure Tfrm_ch_balance_pay.dxDBGrid5DblClick(Sender: TObject);
begin
  fee_view(v_fee_do_airi.fieldbyname('编号').asstring);

end;

procedure Tfrm_ch_balance_pay.dxDBGrid20DblClick(Sender: TObject);
begin
  fee_view(fra_ch_delete_do1.v_fee_do_bscard.fieldbyname('编号').asstring);
end;

procedure Tfrm_ch_balance_pay.t_ch_zhipiaoAfterInsert(DataSet: TDataSet);
begin
  t_ch_zhipiao['制单人']:=employee;
  t_ch_zhipiao['开票日期']:=date;
  t_ch_zhipiao['支票金额']:=0;
  t_ch_zhipiao['支票类型']:='转帐支票';
  t_ch_zhipiao['币别']:='RMB';
  t_ch_zhipiao['年']:=my_strtoyear(date);
  t_ch_zhipiao['月']:=my_strtomonth(Date);
  t_ch_zhipiao['日']:=my_strtodday(Date);
  t_ch_zhipiao['复核状态']:=0;
  t_ch_zhipiao['是否打印']:=0;
  t_ch_zhipiao['是否废除']:=0;

end;

procedure Tfrm_ch_balance_pay.t_ch_zhipiaoBeforeEdit(DataSet: TDataSet);
begin
  if not modify_all then
  begin
    if t_ch_zhipiao.FieldByName('是否废除').asboolean  then
    begin
      showmessage('支票已经废除，不能修改！！');
      abort;
    end;
    if t_ch_zhipiao.FieldByName('是否打印').asboolean  then
    begin
      showmessage('支票已经打印，不能修改！！');
      abort;
    end;
  end;

end;

procedure Tfrm_ch_balance_pay.t_ch_zhipiaoBeforePost(DataSet: TDataSet);
begin
  table_before_post(t_ch_zhipiao,'支票金额');
  table_before_post(t_ch_zhipiao,'币别');
//  table_before_post(t_ch_zhipiao,'支票号码');

end;

procedure Tfrm_ch_balance_pay.bsSkinPageControl1Change(Sender: TObject);
begin
  if not ch_balance_pay_open then exit;
  if bsSkinPageControl1.ActivePage=bsSkinTabSheet2 then begin
    if not t_ch_check.Active then begin
      t_ch_check.close;
      t_ch_check.sql.Clear;
      t_ch_check.sql.Add('select * from t_ch_check where 申请状态 in (''批准支付'',''禁止修改'') ');
      t_ch_check.sql.Add(' and '+open_data('1003','申请人','no','no','no','no'));
      t_ch_check.sql.Add('order by 申请编号');
      t_ch_check.open;

      v_fee_do_seae.open;
      v_fee_do_seai.open;
      v_fee_do_aire.open;
      v_fee_do_airi.open;
      v_fee_do_airtruck.open;
      v_fee_do_railway.open;
      v_fee_do_seae_sum.Open;
      v_fee_do_seai_sum.open;
      v_fee_do_aire_sum.open;
      v_fee_do_airi_sum.open;
      t_ch_fee_do_check.open;
      v_fee_do_airtruck_sum.open;
      v_fee_do_railway_sum.open;
    end;
  end;
  if bsSkinPageControl1.ActivePage=bskntbshtTBS3 then begin
    if t_ch_zhipiao.Active then exit;
    t_ch_zhipiao.close;
    t_ch_zhipiao.sql.clear;
    t_ch_zhipiao.sql.add('select top 50 * from t_ch_zhipiao order by 开票日期 desc');
    t_ch_zhipiao.open;
  end else begin
    t_ch_zhipiao.close;
  end;

end;

procedure Tfrm_ch_balance_pay.zhipiaobankchange(sender: TField);
begin
  try
    if (t_ch_zhipiao.state=dsinsert) or (t_ch_zhipiao.state=dsedit) then
    begin
      if not frm_data_share.t_sys_bank.IsEmpty then
      if frm_data_share.t_sys_bank.Locate('代码',t_ch_zhipiao['银行代码'],[])then
        t_ch_zhipiao['银行账号']:=frm_data_share.t_sys_bank.fieldbyname('银行账号').asstring;
        t_ch_zhipiao['开户银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
        ischangecur:=false;
        try
          t_ch_zhipiao['币别']:=frm_data_share.t_sys_bank.fieldbyname('币别').asstring;
        finally
          ischangecur:=true;
        end;

    end;
  except
    ;
  end;


end;

procedure Tfrm_ch_balance_pay.zhipiaoCurrencychange(sender: TField);
begin
  //支票币别更改
  if ischangecur then begin
    if frm_data_share.t_sys_bank.Locate('代码',t_ch_zhipiao.fieldbyname('银行代码').AsString,[]) then begin
      if frm_data_share.t_sys_bank['币别']<>t_ch_zhipiao['币别'] then begin
        if frm_data_share.t_sys_bank.Locate('币别',t_ch_zhipiao['币别'],[]) then begin
          t_ch_zhipiao['银行代码']:=frm_data_share.t_sys_bank.fieldbyname('代码').asstring;
          t_ch_zhipiao['银行账号']:=frm_data_share.t_sys_bank.fieldbyname('银行账号').asstring;
          t_ch_zhipiao['开户银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
        end;
      end;
    end else begin
      if frm_data_share.t_sys_bank.Locate('币别',t_ch_zhipiao['币别'],[]) then begin
        t_ch_zhipiao['银行代码']:=frm_data_share.t_sys_bank.fieldbyname('代码').asstring;
        t_ch_zhipiao['银行账号']:=frm_data_share.t_sys_bank.fieldbyname('银行账号').asstring;
        t_ch_zhipiao['开户银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
      end;
    end;
  end;  

 if not t_ch_zhipiao.fieldbyname('支票金额').IsNull then
   zhipiaonumchange(sender)
 else begin
   if t_ch_zhipiao['币别']='RMB' then begin
      snccy.CurrencySymbol:='￥';
      Label104.Visible:=false;
      Label111.Visible:=True;
    end else begin
      snccy.CurrencySymbol:='$';
      Label104.Visible:=true;
      Label111.Visible:=false;
    end;
  end;

end;

procedure Tfrm_ch_balance_pay.zhipiaocustchange(sender: TField);
begin
  //支票更改客户名称
  try
    if (t_ch_zhipiao.state=dsinsert) or (t_ch_zhipiao.state=dsedit) then
    begin
      if not frm_data_share.t_crm_client.IsEmpty then
      if frm_data_share.t_crm_client.Locate('客户简称',t_ch_zhipiao['客户名称'],[])then
        if t_ch_zhipiao['币别']='RMB' then begin
          t_ch_zhipiao['收款单位']:=frm_data_share.t_crm_client.fieldbyname('人民币支票抬头').asstring;
          t_ch_zhipiao['汇入行名称']:=frm_data_share.t_crm_client.fieldbyname('开户行RMB').asstring;
          t_ch_zhipiao['收款人帐号']:=frm_data_share.t_crm_client.fieldbyname('帐号RMB').asstring;

        end else begin
          t_ch_zhipiao['收款单位']:=frm_data_share.t_crm_client.fieldbyname('美元支票抬头').asstring;
          t_ch_zhipiao['汇入行名称']:=frm_data_share.t_crm_client.fieldbyname('开户行USD').asstring;
          t_ch_zhipiao['收款人帐号']:=frm_data_share.t_crm_client.fieldbyname('帐号USD').asstring;

        end;
    end;
  except
    ;
  end;

end;

procedure Tfrm_ch_balance_pay.zhipiaodatechange(sender: TField);
begin
  t_ch_zhipiao['年']:=my_strtoyear(Sender.AsDateTime);
  t_ch_zhipiao['月']:=my_strtomonth(Sender.AsDateTime);
  t_ch_zhipiao['日']:=my_strtodday(Sender.AsDateTime);
  t_ch_zhipiao['年小']:=FormatDateTime('YY',Sender.AsDateTime);
  t_ch_zhipiao['月小']:=FormatDateTime('MM',Sender.AsDateTime);
  t_ch_zhipiao['日小']:=FormatDateTime('DD',Sender.AsDateTime);

end;

procedure Tfrm_ch_balance_pay.zhipiaonumchange(sender: TField);
var
  lowamont:String;
  lenlowamont,i,J:Integer;
  upword:array[0..12] of string[4];
begin
  //支票大写生成
  upword[0]:='分';upword[1]:='角';upword[2]:='元';upword[3]:='十';upword[4]:='百';
  upword[5]:='千';upword[6]:='万';upword[7]:='十万';upword[8]:='百万';upword[9]:='千万';
  upword[10]:='亿';upword[11]:='十亿';upword[12]:='百亿';

  if Sender.DataSet['币别']='RMB' then begin
    lowamont:=formatfloat('0.00',Sender.DataSet['支票金额']);
    lenlowamont:=length(lowamont);
    delete(lowamont,lenlowamont-2,1);
    lenlowamont:=length(lowamont);
    J:=0;
    for i:=0 to 12 do begin
      Sender.DataSet[upword[i]]:='';
    end;
    for i:=lenlowamont downto 1 do begin
      Sender.DataSet[upword[j]]:=lowamont[i];
      J:=J+1;
    end;

    Sender.DataSet[upword[lenlowamont]]:='￥';
//    Sender.DataSet['金额小写']:=FloatToStr(Sender.DataSet['支票金额']);
    Sender.DataSet['金额大写']:=DXZH(FloatToStr(Sender.DataSet['支票金额']))
  end else begin
    lowamont:=formatfloat('0.00',Sender.DataSet['支票金额']);
    lenlowamont:=length(lowamont);
    delete(lowamont,lenlowamont-2,1);
    lenlowamont:=length(lowamont);
    for i:=0 to 12 do begin
      Sender.DataSet[upword[i]]:='';
    end;

    J:=0;
    for i:=lenlowamont downto 1 do begin
      Sender.DataSet[upword[j]]:=lowamont[i];
      J:=J+1;
    end;
    Sender.DataSet[upword[lenlowamont]]:='D';
    Sender.DataSet[upword[lenlowamont+1]]:='S';
    Sender.DataSet[upword[lenlowamont+2]]:='U';
    Sender.DataSet['金额大写']:=DXZHUSD(FloatToStr(Sender.DataSet['支票金额']));
  end;



end;

procedure Tfrm_ch_balance_pay.bsSkinButton15Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton15.ClientToScreen(Point(0,bsSkinButton15.Height));
  PopupMenu1.Popup(Pnt.x,Pnt.y);

end;

procedure Tfrm_ch_balance_pay.MenuItem1Click(Sender: TObject);
begin
  if t_ch_zhipiao.IsEmpty then
    exit;
  if t_ch_zhipiao.FieldByName('是否废除').asboolean  then
  begin
    showmessage('支票已经废除，不能打印！！');
    exit;
  end;
  if not t_ch_zhipiao.FieldByName('是否打印').asboolean  then
  begin
    t_ch_zhipiao.Edit;
    t_ch_zhipiao['是否打印']:=1;
    t_ch_zhipiao.post;
  end;

  sys_print('业务支票打印',TMenuItem(sender).tag,t_ch_zhipiao1,nil,nil,nil,nil,nil,nil,nil,t_ch_zhipiao1,nil,nil);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton31Click(Sender: TObject);
var
  Pnt:Tpoint;
begin
  Pnt:=bsSkinButton31.ClientToScreen(Point(0,bsSkinButton31.Height));
  PopupMenu1.Popup(Pnt.x,Pnt.y);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton19Click(Sender: TObject);
begin
  t_ch_zhipiao.Insert;
  bsSkinPageControl4.ActivePageIndex:=1;

end;

procedure Tfrm_ch_balance_pay.bsSkinButton20Click(Sender: TObject);
begin
  table_post(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton27Click(Sender: TObject);
begin
  table_post(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton23Click(Sender: TObject);
begin
  table_cancel(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton29Click(Sender: TObject);
begin
  table_cancel(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton22Click(Sender: TObject);
var
  str:widestring;
  if_shen:string;
  in_id:integer;
begin
  if t_ch_zhipiao.IsEmpty then
    exit;
  if t_ch_zhipiao.FieldByName('是否废除').asboolean  then
  begin
    showmessage('支票已经废除！！');
    exit;
  end;

    str:=trim(InputBox('请输入废除原因', '废除原因：', ''));
    if str=''then
    begin
      showmessage('废除原因不能为空，废除失败！！');
      exit;
    end
    else if str=''then
    begin
      exit;
    end;
    in_id:=t_ch_zhipiao.FieldByName('ZP_ID').asinteger;
    t_ch_zhipiao.Refresh;
    if not t_ch_zhipiao.locate('ZP_ID',in_id,[]) then
      exit;
    try
      modify_all:=true;
      t_ch_zhipiao.Edit;
      t_ch_zhipiao['是否废除']:=1;
      t_ch_zhipiao['废除原因']:=str;
      t_ch_zhipiao['废除人']:=employee;
      t_ch_zhipiao['废除日期']:=now;
      t_ch_zhipiao['申请编号']:='';
      t_ch_zhipiao.post;
      modify_all:=false;
    except
      modify_all:=false;
      showmessage('废除失败！！');
      exit;
    end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton33Click(Sender: TObject);
begin
  bsSkinTabSheet11.Show;

end;

procedure Tfrm_ch_balance_pay.bsSkinButton35Click(Sender: TObject);
begin
  table_Prior(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton36Click(Sender: TObject);
begin
   table_next(t_ch_zhipiao);

end;

procedure Tfrm_ch_balance_pay.bsSkinButton18Click(Sender: TObject);
begin
  bsSkinTabSheet12.Show;

end;

procedure Tfrm_ch_balance_pay.t_ch_zhipiaoAfterOpen(DataSet: TDataSet);
begin
  t_ch_zhipiao.fieldbyname('客户名称').OnChange:=zhipiaocustchange;
  t_ch_zhipiao.fieldbyname('开票日期').OnChange:=zhipiaodatechange;
  t_ch_zhipiao.fieldbyname('支票金额').OnChange:=zhipiaonumchange;
  t_ch_zhipiao.fieldbyname('币别').OnChange:=zhipiaoCurrencychange;
  t_ch_zhipiao.fieldbyname('银行代码').OnChange:=zhipiaobankchange;
end;

procedure Tfrm_ch_balance_pay.dxDBGrid21DblClick(Sender: TObject);
begin
  bsSkinTabSheet12.Show;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton16Click(Sender: TObject);
begin
  try
    frm_ch_zhipiao_query:=tfrm_ch_zhipiao_query.Create (self);
    zhipiao_query_type:=1;
    frm_ch_zhipiao_query.ShowModal;
  finally
    frm_ch_zhipiao_query.Free;
  end;
end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo3Change(Sender: TObject);
begin
  if not frm_data_share.t_sys_bank.IsEmpty then
  if frm_data_share.t_sys_bank.Locate('代码',RxDBLookupCombo3.DisplayValues[0],[])then begin
    t_ch_balance['银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
  end else begin
    t_ch_balance['银行']:='';
  end;

end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo10Change(Sender: TObject);
begin
  if not frm_data_share.t_sys_bank.IsEmpty then
  if frm_data_share.t_sys_bank.Locate('代码',RxDBLookupCombo10.DisplayValues[0],[])then begin
    t_ch_balance['银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
  end else begin
    t_ch_balance['银行']:='';
  end;

end;

procedure Tfrm_ch_balance_pay.RxDBLookupCombo11Change(Sender: TObject);
begin
  if not frm_data_share.t_sys_bank.IsEmpty then
  if frm_data_share.t_sys_bank.Locate('代码',RxDBLookupCombo11.DisplayValues[0],[])then begin
    t_ch_balance['美元银行']:=frm_data_share.t_sys_bank.fieldbyname('银行名称').asstring;
  end else begin
    t_ch_balance['美元银行']:='';
  end;

end;

procedure Tfrm_ch_balance_pay.t_ch_zhipiaoAfterScroll(DataSet: TDataSet);
begin
  if t_ch_zhipiao['币别']='RMB' then begin
    snccy.CurrencySymbol:='￥';
    Label104.Visible:=false;
    Label111.Visible:=True;
  end else begin
    snccy.CurrencySymbol:='$';
    Label104.Visible:=true;
    Label111.Visible:=false;
  end;

end;

procedure Tfrm_ch_balance_pay.MenuItem4Click(Sender: TObject);
var
  i:integer;
  delete_num:real;
  usddelete_num:real;
  rmbdelete_num:real;
  RE:Boolean;
begin
  RE:=TRUE;
  if (t_ch_balance.FieldByName('结算类别').asstring='流程') then begin
    showmessage('当前业务操作的状态不允许更改');
    exit;
  end;

  t_ch_balance.Edit;

  delete_num:=0;


    if t_ch_cust_befbal.IsEmpty then
      exit;
    if_ch_delete_do:=true;
    delete_do_type_num:=1;
    delete_num:=delete_num+t_ch_cust_befbal.fieldbyname('核销金额').asfloat;
    t_ch_cust_befbal.Delete;
    if (delete_num<>0) then
    begin
      t_ch_balance.edit;
      t_ch_balance['预结金额']:=t_ch_balance['预结金额']-delete_num;
      t_ch_balance.post;
    end;
    t_ch_cust_befbal.Requery();
    t_ch_cust_befbal_sum.Requery();
end;

procedure Tfrm_ch_balance_pay.N7Click(Sender: TObject);
var
  do_num:real;
  i:integer;
  jia_num:real;
  rate_num:real;
  if_hexiao:boolean;
begin
  //预付费用结算

  if t_ch_cust_befbal_sum.IsEmpty then
    exit;
      if (t_ch_balance.FieldByName('结算类别').asstring='流程')then
      begin
        if (t_ch_balance.FieldByName('帐单状态').asstring<>'确认核销')then
        begin
          showmessage('当前业务操作的状态不允许更改');
          exit;
        end;
        if_hexiao:=true;
      end
      else
        if_hexiao:=false;
      if (t_ch_balance.FieldByName('帐单状态').asstring='审核通过')then
      begin
        showmessage('当前业务操作的状态不允许更改');
        exit;
      end;
{
      if not t_ch_balance.FieldByName('结算日期').IsNull then
        if Logininfo.endday>t_ch_balance.FieldByName('结算日期').AsDateTime then begin
          MessageDlg('此票结算单已月末结账,如果修改或删除请先反结账！',mtError,[mbok],0);
          exit;
        end;
}        
  if (t_ch_balance.State=dsinsert)or(t_ch_balance.State=dsedit)then
  begin
  end else begin
    t_ch_balance.edit;
  end;
  jia_num:=0;

  if not t_ch_cust_befbalnew.Active then t_ch_cust_befbalnew.Open;
  t_rate.open;

  t_ch_cust_befbalnew.Insert;
  t_ch_cust_befbalnew['方式']:='结算核销';
  t_ch_cust_befbalnew['状态']:='录入状态';
  t_ch_cust_befbalnew['录入人']:=employee;
  t_ch_cust_befbalnew['录入日期']:=date;
  t_ch_cust_befbalnew['核销人']:=t_ch_balance['核销人'];
  t_ch_cust_befbalnew['核销日期']:=t_ch_balance['核销日期'];
  t_ch_cust_befbalnew['帐单编号']:=t_ch_balance['帐单编号'];
  t_ch_cust_befbalnew['结算方式']:=t_ch_balance['结算方式'];
  t_ch_cust_befbalnew['客户名称']:=t_ch_balance['客户名称'];
  t_ch_cust_befbalnew['银行']:=t_ch_balance['银行'];
  t_ch_cust_befbalnew['类型']:=t_ch_cust_befbal_sum['类型'];
  t_ch_cust_befbalnew['银行代码']:=t_ch_balance['银行代码'];
  t_ch_cust_befbalnew['预收金额']:=0;
  t_ch_cust_befbalnew['核销金额']:=0;


  if t_ch_balance.FieldByName('币别').asstring=t_ch_cust_befbal_sum.fieldbyname('币别').asstring then
  begin
    t_ch_cust_befbalnew['币别']:=t_ch_balance['币别'];
    t_ch_cust_befbalnew['核销币别']:=t_ch_balance['币别'];
    t_ch_cust_befbalnew['预收金额']:=-t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat;
    t_ch_cust_befbalnew['核销金额']:=t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat;
    if t_ch_balance.FieldByName('类型').AsString='收' then
      begin
        if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='收'then
          jia_num:=jia_num+t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat
        else
          jia_num:=jia_num-t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat
      end else
      begin
       if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='付'then
       jia_num:=jia_num+t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat
       else
        jia_num:=jia_num-t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat;
     end;
   end
   else
   begin
     rate_num:=get_zh_cur(t_rate,t_ch_cust_befbal_sum.fieldbyname('币别').asstring,t_ch_balance.FieldByName('币别').asstring);
     if rate_num=-1 then
     begin
       t_ch_cust_befbalnew.Cancel;
       t_ch_balance['预结金额']:=jia_num;
       t_ch_balance.post;
//       update_table(bs_text,do_ban1,nil,t_ch_fee,t_ch_fee_sum,2,jia_num,str1,str2,add_fee,add_bill);
       t_ch_cust_befbal.Requery();
       t_ch_cust_befbal_sum.Requery();
       exit;
     end
     else
     begin
       t_ch_cust_befbalnew['币别']:=t_ch_cust_befbal_sum['币别'];
       t_ch_cust_befbalnew['核销币别']:=t_ch_balance['币别'];
       t_ch_cust_befbalnew['预收金额']:=-t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat;
       t_ch_cust_befbalnew['核销金额']:=s_w(strtoint(apointnum),t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat*rate_num);
       if t_ch_balance.FieldByName('类型').AsString='收' then
        begin
          if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='收'then
            jia_num:=jia_num+s_w(strtoint(apointnum),t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat*rate_num)
          else
            jia_num:=jia_num-s_w(strtoint(apointnum),t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat*rate_num);
        end else
        begin
          if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='付'then
            jia_num:=jia_num+s_w(strtoint(apointnum),t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat*rate_num)
          else
           jia_num:=jia_num-s_w(strtoint(apointnum),t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat*rate_num);
       end;
     end;
  end;
  t_ch_cust_befbalnew['收付单号']:=t_ch_cust_befbal_sum.fieldbyname('收付单号').asstring;
  t_ch_cust_befbalnew.post;
  t_ch_balance['预结金额']:=jia_num;
  t_ch_balance.post;
  t_ch_cust_befbal.Requery();
  t_ch_cust_befbal_sum.Requery();

end;

procedure Tfrm_ch_balance_pay.MenuItem6Click(Sender: TObject);
var
  can_do_num,do_num:real;
  rate_num,jia_num:real;
  if_hexiao:boolean;
  str1,str2:Tstringlist;
  bk:TBookmark;

begin
//预付费用部分加入

      if (t_ch_balance.FieldByName('结算类别').asstring='流程')then
      begin
        if (t_ch_balance.FieldByName('帐单状态').asstring<>'确认核销')then
        begin
          showmessage('当前业务操作的状态不允许更改');
          exit;
        end;
        if_hexiao:=true;
      end
      else
        if_hexiao:=false;
      if (t_ch_balance.FieldByName('帐单状态').asstring='审核通过')then
      begin
        showmessage('当前业务操作的状态不允许更改');
        exit;
      end;
{
      if not t_ch_balance.FieldByName('结算日期').IsNull then
        if Logininfo.endday>t_ch_balance.FieldByName('结算日期').AsDateTime then begin
          MessageDlg('此票结算单已月末结账,如果修改或删除请先反结账！',mtError,[mbok],0);
          exit;
        end;
}
 if t_ch_cust_befbal_sum.IsEmpty then
    exit;

  if (t_ch_balance.State=dsinsert)or(t_ch_balance.State=dsedit)then
  begin
  end else begin
    t_ch_balance.edit;
  end;

  jia_num:=0;

  if not t_ch_cust_befbalnew.Active then t_ch_cust_befbalnew.Open;
  t_rate.open;

  t_ch_cust_befbalnew.Insert;
  t_ch_cust_befbalnew['方式']:='结算核销';
  t_ch_cust_befbalnew['状态']:='录入状态';
  t_ch_cust_befbalnew['录入人']:=employee;
  t_ch_cust_befbalnew['录入日期']:=date;
  t_ch_cust_befbalnew['核销人']:=t_ch_balance['核销人'];
  t_ch_cust_befbalnew['核销日期']:=t_ch_balance['核销日期'];
  t_ch_cust_befbalnew['帐单编号']:=t_ch_balance['帐单编号'];
  t_ch_cust_befbalnew['结算方式']:=t_ch_balance['结算方式'];
  t_ch_cust_befbalnew['客户名称']:=t_ch_balance['客户名称'];
  t_ch_cust_befbalnew['银行']:=t_ch_balance['银行'];
  t_ch_cust_befbalnew['类型']:=t_ch_cust_befbal_sum['类型'];
  t_ch_cust_befbalnew['银行代码']:=t_ch_balance['银行代码'];
  t_ch_cust_befbalnew['预收金额']:=0;
  t_ch_cust_befbalnew['核销金额']:=0;

  if t_ch_balance.FieldByName('币别').asstring=t_ch_cust_befbal_sum.fieldbyname('币别').asstring then
  begin
    try
      frm_fee_do_fen:=Tfrm_fee_do_fen.Create(application);
          if not t_ch_balance.FieldByName('自动').asboolean then
          begin
            if can_do_num>t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat then
              frm_fee_do_fen.Edit2.text:=floattostr(t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)
            else
              frm_fee_do_fen.Edit2.text:=floattostr(can_do_num);
          end
          else
            frm_fee_do_fen.Edit2.text:=floattostr(t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat);
      frm_fee_do_fen.ShowModal;
      if frm_fee_do_fen.ModalResult = mrOk then
      begin
        do_num:=strtofloat(frm_fee_do_fen.Edit1.text);
      end
      else
      begin
        do_num:=0;
      end;
    finally
      frm_fee_do_fen.Free;
      frm_fee_do_fen:=nil;
    end;

    if do_num=0 then
    begin
      t_ch_cust_befbalnew.Cancel;
      exit;
    end;

    if ((t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat>0) and(do_num>t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)) or ((t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat<0) and(do_num<t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)) then
     begin
       showmessage('部分结算的金额不能大于所有的金额！');
        t_ch_cust_befbalnew.Cancel;
        exit;
     end;

    t_ch_cust_befbalnew['币别']:=t_ch_balance['币别'];
    t_ch_cust_befbalnew['核销币别']:=t_ch_balance['币别'];
    t_ch_cust_befbalnew['预收金额']:=-do_num;
    t_ch_cust_befbalnew['核销金额']:=do_num;

    if t_ch_balance.FieldByName('类型').AsString='收' then
    begin
        if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='收'then
          jia_num:=jia_num+do_num
        else
          jia_num:=jia_num-do_num;
      end else
      begin
        if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='付'then
          jia_num:=jia_num+do_num
        else
          jia_num:=jia_num-do_num;
    end;
  end
  else
  begin
    rate_num:=get_zh_cur(t_rate,t_ch_cust_befbal_sum.fieldbyname('币别').asstring,t_ch_balance.FieldByName('币别').asstring);
    if rate_num=-1 then
    begin
      t_ch_cust_befbalnew.Cancel;
      exit;
    end
    else
    begin
      try
        frm_fee_do_fen:=Tfrm_fee_do_fen.Create(application);
            if not t_ch_balance.FieldByName('自动').asboolean then
            begin
              if can_do_num/rate_num>t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat then
                frm_fee_do_fen.Edit2.text:=floattostr(t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)
              else
                frm_fee_do_fen.Edit2.text:=floattostr(can_do_num/rate_num);
            end
            else
              frm_fee_do_fen.Edit2.text:=floattostr(t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat);
        frm_fee_do_fen.ShowModal;
        if frm_fee_do_fen.ModalResult = mrOk then
        begin
          do_num:=strtofloat(frm_fee_do_fen.Edit1.text);
        end
        else
        begin
          do_num:=0;
        end;
      finally
        frm_fee_do_fen.Free;
        frm_fee_do_fen:=nil;
      end;

      if do_num=0 then
      begin
        t_ch_cust_befbalnew.Cancel;
        exit;
      end;

    if ((t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat>0) and(do_num>t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)) or ((t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat<0) and(do_num<t_ch_cust_befbal_sum.fieldbyname('预收金额').asfloat)) then
    begin
      showmessage('部分结算的金额不能大于所有的金额！');
      t_ch_cust_befbalnew.Cancel;
      exit;
    end;
     t_ch_cust_befbalnew['币别']:=t_ch_cust_befbal_sum['币别'];
     t_ch_cust_befbalnew['核销币别']:=t_ch_balance['币别'];
     t_ch_cust_befbalnew['预收金额']:=-do_num;
     t_ch_cust_befbalnew['核销金额']:=do_num*rate_num;
     if t_ch_balance.FieldByName('类型').AsString='收' then
     begin
          if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='收'then
            jia_num:=jia_num+do_num*rate_num
          else
            jia_num:=jia_num-do_num*rate_num;
        end else
        begin
          if t_ch_cust_befbal_sum.fieldbyname('类型').asstring='付'then
            jia_num:=jia_num+do_num*rate_num
          else
            jia_num:=jia_num-do_num*rate_num;
      end;
    end;
  end;
  t_ch_cust_befbalnew['收付单号']:=t_ch_cust_befbal_sum.fieldbyname('收付单号').asstring;
  t_ch_cust_befbalnew.Post;
  t_ch_balance['预结金额']:=jia_num;
  t_ch_balance.post;
  t_ch_cust_befbal.Requery();
  t_ch_cust_befbal_sum.Requery();

end;

procedure Tfrm_ch_balance_pay.t_ch_cust_befbal_sumAfterOpen(
  DataSet: TDataSet);
begin
  if not t_ch_cust_befbal_sum.IsEmpty then begin
    Label118.Font.Color:=clred;
    Label117.Font.Color:=clred;
  end else begin
    Label118.Font.Color:=clBlack;
    Label117.Font.Color:=clBlack;
  end;
end;

procedure Tfrm_ch_balance_pay.MenuItem3Click(Sender: TObject);
var strBillNo,str_feeValid:string;
begin

  if t_ch_balance.IsEmpty then begin
    Showmessage('没有帐单数据');
    exit;
  end;
  strBillNo:=t_ch_balance.fieldbyname('帐单编号').AsString;

  if not if_open('035') then
  begin
    showmessage('对不起你没有此模块的操作权限！');
    exit;
  end;

  if t_ch_balance.FieldByName('帐单状态').asstring='审核通过'then
  begin
    showmessage('帐单已经审核！！');
  end
  else
  begin
    try
      if t_ch_balance.State in [dsedit,dsinsert] then t_ch_balance.post;
      t_ch_balance.Refresh;
      modify_all:=true;
      shench:=true;
      t_ch_balance.edit;
      t_ch_balance['帐单状态']:='审核通过';
      t_ch_balance['审核人']:=employee;
      t_ch_balance['审核日期']:=now;
      t_ch_balance.post;

      str_feeValid:=SetfeeValid(t_ch_balance.fieldbyname('帐单编号').asstring);
      if trim(str_feeValid) <>'' then
      begin
       ShowMessage('请检查以下费用'+#13#10+str_feeValid);
      end;

      shench:=false;
      modify_all:=false;
    except
      shench:=false;
      modify_all:=false;
      showmessage('审核失败！！');
    end;
    t_ch_balance.Refresh;
  end;

end;

procedure Tfrm_ch_balance_pay.N8Click(Sender: TObject);
var aAdoQuery,bAdoQuery:TAdoQuery;
    s,s1:string;
    i:Integer;
begin
  if t_ch_balance.IsEmpty then
    exit;
  if dxDBGrid1.SelectedCount<1 then
  begin
    exit;
  end;
  s:='';
  try
    aAdoQuery:=CreateAdoQuery;
    bAdoQuery:=CreateAdoQuery;
    with aAdoQuery do
    begin
      Close;sql.Clear;
      sql.Add('select ');
      sql.Add('sum(case 币别 when ''USD'' then 原始金额 else 0 end) as USDAMT');
      sql.Add(',sum(case 币别 when ''RMB'' then 原始金额 else 0 end) as RMBAMT');
      sql.Add('From t_ch_fee_do');
      sql.Add('where 工作编号=:bsno');
    end;

    with bAdoQuery do
    begin
      Close;sql.Clear;
      sql.Add('select do.ch_id,v.主提单号,count(*)');
      sql.Add('from t_ch_fee_do do');
      sql.Add('left join V_op_bscard_All v on do.业务编号=v.编号');
      sql.Add('where do.工作编号=:bsno');
      sql.Add('group by do.ch_id,v.主提单号');
      sql.Add('having count(*)>1');
    end;

    t_ch_balance.DisableControls;
    for i:=0 to dxDBGrid1.SelectedCount-1 do
    begin
      t_ch_balance.GotoBookmark(pointer(dxDBGrid1.selectedrows[i]));
      aAdoQuery.close;
      aAdoQuery.Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
      aAdoQuery.open;

      bAdoQuery.close;
      bAdoQuery.Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
      bAdoQuery.open;

      if (t_ch_balance.FieldByName('人民币金额').Value<> aAdoQuery.FieldByName('RMBAMT').Value)
        or (t_ch_balance.FieldByName('美元金额').Value<> aAdoQuery.FieldByName('USDAMT').Value) then
      begin
        if s='' then s:=t_ch_balance.FieldByName('帐单编号').Value+':USD'+FormatFloat('0;0;0',aAdoQuery.FieldByName('USDAMT').AsFloat)+'  RMB:'+FormatFloat('0;0;0',aAdoQuery.FieldByName('RMBAMT').AsFloat)
        else s:=s+#13#10+t_ch_balance.FieldByName('帐单编号').Value+':USD'+FormatFloat('0;0;0',aAdoQuery.FieldByName('USDAMT').AsFloat)+'  RMB:'+FormatFloat('0;0;0',aAdoQuery.FieldByName('RMBAMT').AsFloat);
      end;

      
      if not bAdoQuery.IsEmpty then
      begin
        if s1='' then s1:=t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bAdoQuery.FieldByName('主提单号').AsString
        else s1:=s1+#13#10+t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bAdoQuery.FieldByName('主提单号').AsString;
      end;
    end;
  finally
    aAdoQuery.Free;
    bAdoQuery.Free;
    t_ch_balance.EnableControls;
    t_ch_balance.Refresh;
    if s<>'' then 
    ShowMessage(s);

    if s1<>'' then
    ShowMessage(s1);
  end;
end;

procedure Tfrm_ch_balance_pay.bsSkinButton17Click(Sender: TObject);
begin
  if t_ch_zhipiao.IsEmpty then
    exit;
  if application.MessageBox('您确定要删除数据吗?','警告:',MB_OKCANCEL)=IDOK then
    t_ch_zhipiao.delete;

end;

procedure Tfrm_ch_balance_pay.bsSkinButton34Click(Sender: TObject);
var
  afield : variant;
  i: Integer;
begin
  if t_ch_balance.IsEmpty then
    exit;
  try
    afield := vararraycreate([0,t_ch_balance.fieldcount-1],varvariant);
    for i := 0 to (t_ch_balance.fieldcount-1) do
    begin
      afield[i] :=t_ch_balance.fields[i].value ;
    end;
    t_ch_balance.insert;
    for i := 0 to (t_ch_balance.fieldcount-1) do
    begin
      if t_ch_balance.fields[i].FieldName<>'帐单编号'then
        t_ch_balance.fields[i].value := afield[i] ;
    end;
    t_ch_balance['帐单状态']:='录入状态';
    t_ch_balance['结算类别']:='自由';
    t_ch_balance['结算人']:=employee;
    t_ch_balance['结算日期']:=now;
    t_ch_balance['自动']:=1;
    t_ch_balance['结算金额']:=0;
    t_ch_balance['实结金额']:=0;
    t_ch_balance['虚结金额']:=0;
    t_ch_balance['美元金额']:=0;
    t_ch_balance['人民币金额']:=0;
    t_ch_balance['类型']:='付';
    t_ch_balance['审核人']:='';
    t_ch_balance['审核日期']:=null;
    t_ch_balance['备注']:='';
    t_ch_balance['相关号码']:='';
    t_ch_balance['财务']:=0;
    t_ch_balance['财务凭证']:='';
//    t_ch_balance['帐单编号']:=get_no(date,'BP');
{
    if bsSkinNotebook1.PageIndex<>0 then
     getdetail;
 }
    notdetail:=false;
    bsSkinNotebook1.PageIndex:=1;
    bsSkinButton11.Caption:='返回列表';
    notdetail:=true;
  except
    if t_ch_balance.state=dsinsert then
      t_ch_balance.cancel;
    showmessage('复制添加失败！！');
  end;
end;

procedure Tfrm_ch_balance_pay.dxDBGrid20Column25CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color('海运出口',ANode.Strings[dxDBGrid20Column25.Index]);
  AFont.Color:=clblack;

end;

procedure Tfrm_ch_balance_pay.dxDBGrid20Column26CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  AColor:=dxgrid_color_fee(ANode.strings[dxDBGrid20Column26.Index]);
  AFont.Color:=clblack;
end;

procedure Tfrm_ch_balance_pay.getdetail(balno:string);
begin
  //添加费用的数据集，只在需要的时候打开提高速度
    if StrToBool(get_parameters_value(85,'false')) then begin
      fra_ch_delete_do1.v_fee_do_bscard.close;
      fra_ch_delete_do1.v_fee_do_bscard.SQL.clear;
      fra_ch_delete_do1.v_fee_do_bscard.sql.add('select * from v_fee_do_bscard '
                                         +'where 工作编号='''+balno+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_bscard.Open;

      fra_ch_delete_do1.v_fee_do_bscard_sum.close;
      fra_ch_delete_do1.v_fee_do_bscard_sum.SQL.clear;
      fra_ch_delete_do1.v_fee_do_bscard_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_bscard '
                                             +'where 工作编号='''+balno+''' group by 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),原始币别');
      fra_ch_delete_do1.v_fee_do_bscard_sum.Open;
    end else begin
      fra_ch_delete_do1.v_fee_do_seae.close;
      fra_ch_delete_do1.v_fee_do_seae.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seae.sql.add('select * from v_fee_do_seae '
                                         +'where 工作编号='''+balno+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_seae.Open;

      fra_ch_delete_do1.v_fee_do_seai.close;
      fra_ch_delete_do1.v_fee_do_seai.SQL.clear;
      fra_ch_delete_do1.v_fee_do_seai.sql.add('select * from v_fee_do_seai '
                                         +'where 工作编号='''+balno+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_seai.Open;

      fra_ch_delete_do1.v_fee_do_aire.close;
      fra_ch_delete_do1.v_fee_do_aire.SQL.clear;
      fra_ch_delete_do1.v_fee_do_aire.sql.add('select * from v_fee_do_aire '
                                         +'where 工作编号='''+balno+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_aire.Open;

      fra_ch_delete_do1.v_fee_do_airi.close;
      fra_ch_delete_do1.v_fee_do_airi.SQL.clear;
      fra_ch_delete_do1.v_fee_do_airi.sql.add('select * from v_fee_do_airi '
                                         +'where 工作编号='''+balno+''' order by 类型,编号,费用名称');
      fra_ch_delete_do1.v_fee_do_airi.Open;

    fra_ch_delete_do1.v_fee_do_seae_sum.close;
    fra_ch_delete_do1.v_fee_do_seae_sum.SQL.clear;
    fra_ch_delete_do1.v_fee_do_seae_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_seae '
                                             +'where 工作编号='''+balno+''' group by 类型,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开船日期,111),1,7),原始币别');
    fra_ch_delete_do1.v_fee_do_seae_sum.Open;

    fra_ch_delete_do1.v_fee_do_seai_sum.close;
    fra_ch_delete_do1.v_fee_do_seai_sum.SQL.clear;
    fra_ch_delete_do1.v_fee_do_seai_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_seai '
                                             +'where 工作编号='''+t_ch_balance.fieldbyname('帐单编号').AsString+''' group by 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),原始币别');
    fra_ch_delete_do1.v_fee_do_seai_sum.Open;

    fra_ch_delete_do1.v_fee_do_aire_sum.close;
    fra_ch_delete_do1.v_fee_do_aire_sum.SQL.clear;
    fra_ch_delete_do1.v_fee_do_aire_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),开航日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_aire '
                                             +'where 工作编号='''+balno+''' group by 类型,SUBSTRING(CONVERT(char(15),开航日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),开航日期,111),1,7),原始币别');
    fra_ch_delete_do1.v_fee_do_aire_sum.Open;

    fra_ch_delete_do1.v_fee_do_airi_sum.close;
    fra_ch_delete_do1.v_fee_do_airi_sum.SQL.clear;
    fra_ch_delete_do1.v_fee_do_airi_sum.sql.add('select 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7) AS 月份,揽货人,原始币别,sum(原始金额) as 原始金额,sum(金额) as 金额 from v_fee_do_airi '
                                             +'where 工作编号='''+balno+''' group by 类型,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),揽货人,原始币别 '
                                             +'order by 类型,揽货人,SUBSTRING(CONVERT(char(15),进口日期,111),1,7),原始币别');
    fra_ch_delete_do1.v_fee_do_airi_sum.open;
  end;
end;

procedure Tfrm_ch_balance_pay.closedetail;
begin
  //关闭添加费用数据集
     if StrToBool(get_parameters_value(85,'false')) then begin
      fra_ch_delete_do1.v_fee_do_bscard.close;
      fra_ch_delete_do1.v_fee_do_bscard_sum.close;
    end else begin
      fra_ch_delete_do1.v_fee_do_seae.close;
      fra_ch_delete_do1.v_fee_do_seai.close;
      fra_ch_delete_do1.v_fee_do_aire.close;
      fra_ch_delete_do1.v_fee_do_airi.close;
      fra_ch_delete_do1.v_fee_do_seae_sum.close;
      fra_ch_delete_do1.v_fee_do_seai_sum.close;
      fra_ch_delete_do1.v_fee_do_aire_sum.close;
      fra_ch_delete_do1.v_fee_do_airi_sum.close;
    end;

end;
{
SELECT *
FROM ch_check
WHERE (申请编号 NOT IN
          (SELECT DISTINCT t_ch_fee_do.工作编号
         FROM t_ch_fee_do INNER JOIN
               t_ch_fee ON t_ch_fee_do.CH_ID = t_ch_fee.CH_ID AND 
               t_ch_fee_do.原始金额 >( t_ch_fee.金额 - t_ch_fee.结算金额) AND 
               t_ch_fee_do.类型 = '3')) and (申请编号<>'')
order by 申请编号

}
procedure Tfrm_ch_balance_pay.fra_ch_add_do1bsSkinButton8Click(
  Sender: TObject);
begin
  fra_ch_add_do1.bsSkinButton8Click(Sender);

end;

procedure Tfrm_ch_balance_pay.fra_ch_add_do1MenuItem1Click(
  Sender: TObject);
begin
  fra_ch_add_do1.MenuItem1Click(Sender);

end;

procedure Tfrm_ch_balance_pay.dxDBGrid2ColumnSorting(Sender: TObject;
  Column: TdxDBTreeListColumn; var Allow: Boolean);
begin
  Column_sort(Column,t_ch_balance,'申请编号');
end;

procedure Tfrm_ch_balance_pay.dxDBGrid2SelectedCountChange(
  Sender: TObject);
var i:integer;
   amt,usdAmt:Double;
begin
  if t_ch_check.IsEmpty then
    exit;
  if dxDBGrid2.SelectedCount>=1 then
  begin
    amt:=0;
    usdAmt:=0;
    for i:=0 to dxDBGrid2.SelectedCount-1 do
    begin
      t_ch_check.GotoBookmark(pointer(dxDBGrid2.selectedrows[i]));
      if t_ch_check.fieldByName('币别').AsString='RMB' then
        amt:=amt+t_ch_check.fieldByName('申请金额').AsFloat
      else usdAmt:=usdAmt+t_ch_check.fieldByName('申请金额').AsFloat;
    end;
  end
  else
  begin
    amt:=0;
    usdAmt:=0;
    if t_ch_check.fieldByName('币别').AsString='RMB' then
      amt:=amt+t_ch_check.fieldByName('申请金额').AsFloat
    else usdAmt:=usdAmt+t_ch_check.fieldByName('申请金额').AsFloat;
  end;
  Label130.Caption:='你选择了'+inttostr(dxDBGrid2.SelectedCount)+'票业务,'+'RMB金额:'+FormatFloat('#,##,0.00;-0.00',amt)+'  外币金额:'+FormatFloat('#,##,0.00;-0.00',usdAmt);

end;


procedure Tfrm_ch_balance_pay.SelectAddVouchers;
var t_cw_design,aQuery,bQuery,aAdoQueryCheck:TAdoQuery;
    s_error:string;
    i:integer;
begin
  if not if_open('185') and not if_open('523') then
  begin
    showmessage('对不起你没有此模块的操作权限！');
    exit;
  end;

  try
    if not ASSIGNED(frm_sys_progress) then
    frm_sys_progress:=tfrm_sys_progress.Create(application);
    frm_sys_progress.bsSkinGauge1.ProgressText:='正在校验数据。。。';
    frm_sys_progress.Show;

    frm_sys_progress.bsSkinGauge1.MaxValue:=dxDBGrid1.SelectedCount;
    frm_sys_progress.bsSkinGauge1.MinValue:=0;
    frm_sys_progress.bsSkinGauge1.Value:=0;

    t_ch_balance.DisableControls;
    for i:=0 to dxDBGrid1.SelectedCount-1 do
    begin
      t_ch_balance.GotoBookmark(pointer(dxDBGrid1.selectedrows[i]));
      frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;


      if trim(GetBalanceVou(t_ch_balance.fieldbyname('帐单编号').AsString))<>'' then
      begin
        showmessage('已经生成凭证！！');
        exit;
      end;

      if t_ch_balance.FieldByName('结算日期').IsNull  then
      begin
        ShowMessage('结算日期不能为空');
        Exit;
      end;

      if  t_ch_balance.fieldbyname('附件数').AsInteger=0 then
      begin
        ShowMessage('附件数不能为0,请输入附件数');
        Exit;
      end;

      if Trim(t_ch_balance.FieldByName('财务代码').AsString)=''  then
      begin
        ShowMessage(t_ch_balance.FieldByName('客户名称').AsString+' 没有财务代码');
        Exit;
      end;

      if Trim(t_ch_balance.FieldByName('结算人').AsString)<>employee then
      begin
        ShowMessage('账单编号:'+t_ch_balance.FieldByName('帐单编号').AsString+', 结算人不是当前人员！');
      end;


      s_error:='';
      aAdoQueryCheck:=CreateAdoQuery;
      with aAdoQueryCheck do
      try

        close;sql.Clear;
        sql.Add('select v.主提单号,v.业务类型,fee.费用名称,fee.客户名称,fee.金额,fee.结算金额,do.原始金额,do.工作编号 帐单编号 from t_ch_fee fee');
        sql.Add('left JOIN  t_ch_fee_do  do on fee.编号=do.业务编号 and fee.ch_id=do.ch_id');
        sql.Add('left join V_op_bscard_All v on fee.编号=v.编号');
        sql.Add('where do.工作编号=:工作编号  and  ((fee.结算金额=0  and  fee.金额<>0) or (fee.金额>0 and fee.金额<fee.结算金额) or (fee.金额<0 and fee.金额>fee.结算金额))');
        sql.Add('and do.类型 in (3,4) ');
        sql.Add('');
        Parameters.ParamByName('工作编号').Value:=t_ch_balance.fieldbyname('帐单编号').AsString;
        Open;First;
        while not Eof do
        begin
          if Trim(s_error)='' then
            s_error:=fieldbyname('主提单号').AsString+'/'+fieldbyname('费用名称').AsString+'/'+fieldbyname('客户名称').AsString+'/'+fieldbyname('金额').AsString
          else s_error:=s_error+#13#10+fieldbyname('主提单号').AsString+'/'+fieldbyname('费用名称').AsString+'/'+fieldbyname('客户名称').AsString+'/'+fieldbyname('金额').AsString;
          Next;
        end;
        if Trim(s_error)<>'' then
        begin
          ShowMessage(s_error+#13#10+'存在异常请核对帐单');
          Exit;
        end;

        s_error:='';
        Close;sql.Clear;
        sql.Add('select ');
        sql.Add('sum(case 币别 when ''USD'' then 原始金额 else 0 end) as USDAMT');
        sql.Add(',sum(case 币别 when ''RMB'' then 原始金额 else 0 end) as RMBAMT');
        sql.Add('From t_ch_fee_do');
        sql.Add('where 工作编号=:bsno');
        Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
        open;
        if (t_ch_balance.FieldByName('人民币金额').Value<> FieldByName('RMBAMT').Value)
          or (t_ch_balance.FieldByName('美元金额').Value<> FieldByName('USDAMT').Value) then
        begin
          s_error:=t_ch_balance.FieldByName('帐单编号').Value+':USD'+FormatFloat('0;0;0',FieldByName('USDAMT').AsFloat)+'  RMB:'+FormatFloat('0;0;0',FieldByName('RMBAMT').AsFloat);
        end;

        if Trim(s_error)<>'' then
        begin
          ShowMessage(s_error+#13#10+'帐单总数不等于帐单明细请核对帐单');
          Exit;
        end;
      finally
        free;
      end;

      try
        s_error:='';

        bQuery:=CreateAdoQuery;
        with bQuery do
        begin
          Close;sql.Clear;
          sql.Add('select do.ch_id,v.主提单号,count(*)');
          sql.Add('from t_ch_fee_do do');
          sql.Add('left join V_op_bscard_All v on do.业务编号=v.编号');
          sql.Add('where do.工作编号=:bsno');
          sql.Add('group by do.ch_id,v.主提单号');
          sql.Add('having count(*)>1');
          Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
          open;
        end;

        if not bQuery.IsEmpty then
        begin
           if s_error='' then s_error:=t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bQuery.FieldByName('主提单号').AsString
           else s_error:=s_error+#13#10+t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bQuery.FieldByName('主提单号').AsString;
           ShowMessage(s_error+#13#10+'帐单总数不等于帐单明细请核对帐单');
           Exit;
        end;
      finally
        bQuery.Free;
      end;
    end
  finally
    t_ch_balance.EnableControls;
    frm_sys_progress.Close;
    frm_sys_progress.Free;
    frm_sys_progress:=nil;
  end;

  try
    if not ASSIGNED(frm_sys_progress) then
    frm_sys_progress:=tfrm_sys_progress.Create(application);
    frm_sys_progress.bsSkinGauge1.ProgressText:='正在生成凭证。。。';
    frm_sys_progress.Show;

    frm_sys_progress.bsSkinGauge1.MaxValue:=dxDBGrid1.SelectedCount;
    frm_sys_progress.bsSkinGauge1.MinValue:=0;
    frm_sys_progress.bsSkinGauge1.Value:=0;
        t_cw_design:=CreateAdoQuery;
        with t_cw_design do
        begin
          Close;Sql.Clear;
          SQL.Add('select * from t_cw_design');
          Open;
        end;
        aQuery:=CreateAdoQuery;



        aQuery.Close;
        aQuery.SQL.Clear;
        aQuery.SQL.add('update t_ch_balance set 财务=1,财务凭证=:财务凭证,凭证日期=:凭证日期 where 帐单编号=:帐单编号');




        dmacc:=TdmAcc.Create(self);
    t_ch_balance.DisableControls;
    for i:=0 to dxDBGrid1.SelectedCount-1 do
    begin
        t_ch_balance.GotoBookmark(pointer(dxDBGrid1.selectedrows[i]));
        frm_sys_progress.bsSkinGauge1.Value:=frm_sys_progress.bsSkinGauge1.Value+1;


        NewDCVou(t_ch_balance,dmacc.AdotblVou,dmacc.AdotblVouItems,t_cw_design,employee
        ,Logininfo.bsDate,6.25,6.3,True);
        {

        if not assigned(frm_cw_pingzheng) then
          frm_cw_pingzheng:=tfrm_cw_pingzheng.Create (self);
        frm_cw_pingzheng.ManualDock(frm_main.SearchTabs('frm_cw_pingzheng',frm_cw_pingzheng.caption),nil,alClient);
        frm_cw_pingzheng.EditOrdNoFrm.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
        frm_cw_pingzheng.EditOrdNoTo.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
        frm_cw_pingzheng.show;
       }
        aQuery.Parameters.ParamByName('财务凭证').Value:=dmacc.ADOTblVou.fieldbyname('ordno').AsString;
        aQuery.Parameters.ParamByName('帐单编号').Value:=t_ch_balance.fieldbyname('帐单编号').AsString;
        aQuery.Parameters.ParamByName('凭证日期').Value:=Logininfo.bsDate;

    //    aQuery.Parameters.ParamByName('凭证日期').Value:=FormatDateTime('YYYY-MM-DD',t_ch_balance.fieldbyname('结算日期').Value);
        aQuery.ExecSQL;
    end;    
       // bsSkinButton1.OnClick(bsSkinButton1);
  finally
    frm_sys_progress.Close;
    frm_sys_progress.Free;
    frm_sys_progress:=nil;
    t_ch_balance.EnableControls;
    t_ch_balance.Requery();
    t_cw_design.Free;
    aQuery.Free;
    freeAndNil(dmacc);
  end;
end;

procedure Tfrm_ch_balance_pay.AddVouchers;
var t_cw_design,aQuery,bQuery,aAdoQueryCheck:TAdoQuery;
    s_error:string;
    i:integer;
begin
  if not if_open('185') then
  begin
    showmessage('对不起你没有此模块的操作权限！');
    exit;
  end;

      if trim(GetBalanceVou(t_ch_balance.fieldbyname('帐单编号').AsString))<>'' then
      begin
        showmessage('已经生成凭证！！');
        exit;
      end;

      if t_ch_balance.FieldByName('结算日期').IsNull  then
      begin
        ShowMessage('结算日期不能为空');
        Exit;
      end;

      if  t_ch_balance.fieldbyname('附件数').AsInteger=0 then
      begin
        ShowMessage('附件数不能为0,请输入附件数');
        Exit;
      end;

      if Trim(t_ch_balance.FieldByName('财务代码').AsString)=''  then
      begin
        ShowMessage(t_ch_balance.FieldByName('客户名称').AsString+' 没有财务代码');
        Exit;
      end;
          if Trim(t_ch_balance.FieldByName('结算人').AsString)<>employee then
      begin
        ShowMessage('账单编号:'+t_ch_balance.FieldByName('帐单编号').AsString+', 结算人不是当前人员！');
      end;



      s_error:='';
      aAdoQueryCheck:=CreateAdoQuery;
      with aAdoQueryCheck do
      try

        close;sql.Clear;
        sql.Add('select v.主提单号,v.业务类型,fee.费用名称,fee.客户名称,fee.金额,fee.结算金额,do.原始金额,do.工作编号 帐单编号 from t_ch_fee fee');
        sql.Add('left JOIN  t_ch_fee_do  do on fee.编号=do.业务编号 and fee.ch_id=do.ch_id');
        sql.Add('left join V_op_bscard_All v on fee.编号=v.编号');
        sql.Add('where do.工作编号=:工作编号  and  ((fee.结算金额=0  and  fee.金额<>0) or (fee.金额>0 and fee.金额<fee.结算金额) or (fee.金额<0 and fee.金额>fee.结算金额))');
        sql.Add('and do.类型 in (3,4) ');
        sql.Add('');
        Parameters.ParamByName('工作编号').Value:=t_ch_balance.fieldbyname('帐单编号').AsString;
        Open;First;
        while not Eof do
        begin
          if Trim(s_error)='' then
            s_error:=fieldbyname('主提单号').AsString+'/'+fieldbyname('费用名称').AsString+'/'+fieldbyname('客户名称').AsString+'/'+fieldbyname('金额').AsString
          else s_error:=s_error+#13#10+fieldbyname('主提单号').AsString+'/'+fieldbyname('费用名称').AsString+'/'+fieldbyname('客户名称').AsString+'/'+fieldbyname('金额').AsString;
          Next;
        end;
        if Trim(s_error)<>'' then
        begin
          ShowMessage(s_error+#13#10+'存在异常请核对帐单');
          Exit;
        end;

        s_error:='';
        Close;sql.Clear;
        sql.Add('select ');
        sql.Add('sum(case 币别 when ''USD'' then 原始金额 else 0 end) as USDAMT');
        sql.Add(',sum(case 币别 when ''RMB'' then 原始金额 else 0 end) as RMBAMT');
        sql.Add('From t_ch_fee_do');
        sql.Add('where 工作编号=:bsno');
        Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
        open;
        if (t_ch_balance.FieldByName('人民币金额').Value<> FieldByName('RMBAMT').Value)
          or (t_ch_balance.FieldByName('美元金额').Value<> FieldByName('USDAMT').Value) then
        begin
          s_error:=t_ch_balance.FieldByName('帐单编号').Value+':USD'+FormatFloat('0;0;0',FieldByName('USDAMT').AsFloat)+'  RMB:'+FormatFloat('0;0;0',FieldByName('RMBAMT').AsFloat);
        end;

        if Trim(s_error)<>'' then
        begin
          ShowMessage(s_error+#13#10+'帐单总数不等于帐单明细请核对帐单');
          Exit;
        end;
      finally
        free;
      end;

      try
        s_error:='';

        bQuery:=CreateAdoQuery;
        with bQuery do
        begin
          Close;sql.Clear;
          sql.Add('select do.ch_id,v.主提单号,count(*)');
          sql.Add('from t_ch_fee_do do');
          sql.Add('left join V_op_bscard_All v on do.业务编号=v.编号');
          sql.Add('where do.工作编号=:bsno');
          sql.Add('group by do.ch_id,v.主提单号');
          sql.Add('having count(*)>1');
          Parameters.ParamByName('bsno').Value:=t_ch_balance.FieldByName('帐单编号').Value;
          open;
        end;

        if not bQuery.IsEmpty then
        begin
           if s_error='' then s_error:=t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bQuery.FieldByName('主提单号').AsString
           else s_error:=s_error+#13#10+t_ch_balance.FieldByName('帐单编号').Value+' 主提单号:' +bQuery.FieldByName('主提单号').AsString;
           ShowMessage(s_error+#13#10+'帐单总数不等于帐单明细请核对帐单');
           Exit;
        end;
      finally
        bQuery.Free;
      end;

  try
        t_cw_design:=CreateAdoQuery;
        with t_cw_design do
        begin
          Close;Sql.Clear;
          SQL.Add('select * from t_cw_design');
          Open;
        end;
        aQuery:=CreateAdoQuery;



        aQuery.Close;
        aQuery.SQL.Clear;
        aQuery.SQL.add('update t_ch_balance set 财务=1,财务凭证=:财务凭证,凭证日期=:凭证日期 where 帐单编号=:帐单编号');




        dmacc:=TdmAcc.Create(self);
       t_ch_balance.DisableControls;


        NewDCVou(t_ch_balance,dmacc.AdotblVou,dmacc.AdotblVouItems,t_cw_design,employee        ,Logininfo.bsDate,6.25,6.3,false);
         if frm_data_share.t_sys_company.FieldByName('发票抬头').AsString='' then begin
                   if not assigned(frm_cw_pingzheng_jku8) then
            frm_cw_pingzheng_jku8:=tfrm_cw_pingzheng_jku8.Create (self);
          frm_cw_pingzheng_jku8.ManualDock(frm_main.SearchTabs('frm_cw_pingzheng_jku8',frm_cw_pingzheng_jku8.caption),nil,alClient);
          frm_cw_pingzheng_jku8.EditOrdNoFrm.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
          frm_cw_pingzheng_jku8.EditOrdNoTo.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
          frm_cw_pingzheng_jku8.show;
          aQuery.Parameters.ParamByName('财务凭证').Value:=dmacc.ADOTblVou.fieldbyname('ordno').AsString;
          aQuery.Parameters.ParamByName('帐单编号').Value:=t_ch_balance.fieldbyname('帐单编号').AsString;
          aQuery.Parameters.ParamByName('凭证日期').Value:=Logininfo.bsDate;
         end else begin
           if not assigned(frm_cw_pingzheng_u8) then
            frm_cw_pingzheng_u8:=tfrm_cw_pingzheng_u8.Create (self);
          frm_cw_pingzheng_u8.ManualDock(frm_main.SearchTabs('frm_cw_pingzheng_u8',frm_cw_pingzheng_u8.caption),nil,alClient);
          frm_cw_pingzheng_u8.EditOrdNoFrm.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
          frm_cw_pingzheng_u8.EditOrdNoTo.Text:=dmacc.AdotblVou.FieldByName('ORDNO').AsString;
          frm_cw_pingzheng_u8.show;
          aQuery.Parameters.ParamByName('财务凭证').Value:=dmacc.ADOTblVou.fieldbyname('ordno').AsString;
          aQuery.Parameters.ParamByName('帐单编号').Value:=t_ch_balance.fieldbyname('帐单编号').AsString;
          aQuery.Parameters.ParamByName('凭证日期').Value:=Logininfo.bsDate;
        end;

    //    aQuery.Parameters.ParamByName('凭证日期').Value:=FormatDateTime('YYYY-MM-DD',t_ch_balance.fieldbyname('结算日期').Value);
        aQuery.ExecSQL;
       // bsSkinButton1.OnClick(bsSkinButton1);
  finally
    t_ch_balance.EnableControls;
    t_ch_balance.Requery();
    t_cw_design.Free;
    aQuery.Free;
    freeAndNil(dmacc);
  end;
end;


procedure Tfrm_ch_balance_pay.dxDBGrid1CustomDraw(Sender: TObject;
  ACanvas: TCanvas; ARect: TRect; ANode: TdxTreeListNode;
  AColumn: TdxDBTreeListColumn; const AText: String; AFont: TFont;
  var AColor: TColor; ASelected, AFocused: Boolean; var ADone: Boolean);
begin
  if uppercase(ANode.Strings[dxDBGrid1Column40.Index])='TRUE' then begin
    AFont.Color:=clMoneyGreen;
  end;

end;

procedure Tfrm_ch_balance_pay.bsSkinButton37Click(Sender: TObject);
begin
  if bsSkinNotebook1.PageIndex=0 then
    SelectAddVouchers
  else AddVouchers;

end;

end.